Date: Fri, 28 Aug 1998 16:20:25 +0200 (CEST) From: Bodo Bock <B.Bock@tu-bs.de> To: AIC7xxx Mailing-List <AIC7xxx@FreeBSD.ORG> Subject: AHA 2940 and WangDat 3200 Message-ID: <13798.48297.22634.725839@bobo.wg8.de>
next in thread | raw e-mail | index | archive | help
Hi everybody, I have a problem with my WangDat 3200 DAT streamer and AHA 2940 under S.u.S.E. Linux 5.2. ID 0: IBM harddisk ID 1: Toshiba CD-ROM ID 3: external jaz drive ID 4: WangDat streamer With kernel 2.0.35 and pre7 patch included and no tape in the streamer I get: [...] <6>(scsi0) <Adaptec AHA-294X SCSI host adapter> found at PCI 20/0 <6>(scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs <6>(scsi0) Downloading sequencer code... 412 instructions downloaded <4>scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.0pre7/3.2.4 <4> <Adaptec AHA-294X SCSI host adapter> <4>scsi : 1 host. <4> Vendor: IBM Model: DCAS-34330 Rev: S65A <4> Type: Direct-Access ANSI SCSI revision: 02 <4>Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 <6>(scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. <4> Vendor: TOSHIBA Model: CD-ROM XM-5301TA Rev: 0925 <4> Type: CD-ROM ANSI SCSI revision: 02 <6>(scsi0:0:1:0) Synchronous at 4.0 Mbyte/sec, offset 15. <4> Vendor: iomega Model: jaz 1GB Rev: J.83 <4> Type: Direct-Access ANSI SCSI revision: 02 <4>Detected scsi removable disk sdb at scsi0, channel 0, id 3, lun 0 <6>(scsi0:0:3:0) Synchronous at 10.0 Mbyte/sec, offset 15. <4>scsi0 : channel 0 target 4 lun 0 request sense failed, performing reset. <4>SCSI bus is being reset for host 0 channel 0. <4>scsi : aborting command due to timeout : pid 30, scsi0, channel 0, id 5, lun 0 Test Unit Ready 00 00 00 00 00 <4>scsi : detected 2 SCSI disks total. [...] With kernel 2.0.35 and pre7 patch included and tape in the streamer I get: [...] <6>(scsi0) <Adaptec AHA-294X SCSI host adapter> found at PCI 20/0 <6>(scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs <6>(scsi0) Downloading sequencer code... 412 instructions downloaded <4>scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.0pre7/3.2.4 <4> <Adaptec AHA-294X SCSI host adapter> <4>scsi : 1 host. <4> Vendor: IBM Model: DCAS-34330 Rev: S65A <4> Type: Direct-Access ANSI SCSI revision: 02 <4>Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 <6>(scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. <4> Vendor: TOSHIBA Model: CD-ROM XM-5301TA Rev: 0925 <4> Type: CD-ROM ANSI SCSI revision: 02 <6>(scsi0:0:1:0) Synchronous at 4.0 Mbyte/sec, offset 15. <4> Vendor: iomega Model: jaz 1GB Rev: J.83 <4> Type: Direct-Access ANSI SCSI revision: 02 <4>Detected scsi removable disk sdb at scsi0, channel 0, id 3, lun 0 ????????????????????????????????????????????????????????????????????? <6>(scsi0:0:3:0) Synchronous at 10.0 Mbyte/sec, offset 15. <4> Vendor: iomega Model: jaz 1GB Rev: J.83 <4> Type: Direct-Access ANSI SCSI revision: 02 ?????????????????????????????????????????????????????????????????????? <4>Detected scsi removable disk sdc at scsi0, channel 0, id 4, lun 0 <4>scsi0 : channel 0 target 4 lun 2 request sense failed, performing reset. <4>SCSI bus is being reset for host 0 channel 0. <4>scsi : aborting command due to timeout : pid 32, scsi0, channel 0, id 5, lun 0 Test Unit Ready 00 00 00 00 00 <4>scsi : detected 3 SCSI disks total. [...] But I have only one jaz drive and if I disconnect my jaz, there are 2 CD-ROMS detected. With kernel 2.0.32 and no tape inserted I get: [...] <4>aic7xxx: <Adaptec AHA-294X SCSI host adapter> at PCI 20 <6>aic7xxx: BIOS enabled, IO Port 0x6000, IO Mem 0xf0800000, IRQ 10 <6>aic7xxx: Single Channel, SCSI ID 7, 16/16 SCBs, QFull 16, QMask 0x1f <4>scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 4.1/3.2 <4>scsi : 1 host. <6>scsi0: Scanning channel A for devices. <4> Vendor: IBM Model: DCAS-34330 Rev: S65A <4> Type: Direct-Access ANSI SCSI revision: 02 <4>Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 <4> Vendor: TOSHIBA Model: CD-ROM XM-5301TA Rev: 0925 <4> Type: CD-ROM ANSI SCSI revision: 02 <4> Vendor: iomega Model: jaz 1GB Rev: J.83 <4> Type: Direct-Access ANSI SCSI revision: 02 <4>Detected scsi removable disk sdb at scsi0, channel 0, id 3, lun 0 <4>scsi0 channel 0 : resetting for second half of retries. <4>SCSI bus is being reset for host 0 channel 0. <4>(scsi0:-1:0) Reset device, active_scb 0 <4>scsi0: Resetting current channel A <4>scsi0: Channel reset, sequencer restarted <4> Vendor: WangDAT Model: Model 3200 Rev: 03.0 <4> Type: Sequential-Access ANSI SCSI revision: 02 <4>scsi : detected 2 SCSI disks total. [...] The streamer is detected! Any hints? If you need more info, please let me know. BTW: Does anybody know what the following message means? Aug 28 15:00:26 bobo kernel: st0: Error with sense data: Current error st09:00: sns = f0 4 Aug 28 15:00:26 bobo kernel: ASC=40 ASCQ= 0 Aug 28 15:00:26 bobo kernel: Raw sense data:0xf0 0x00 0x04 0x00 0x00 0x00 0x1f 0x12 0x00 0x00 0x00 0x00 0x40 0x00 0x00 0x00 Where may I search for such messages? Thanks in advance Bodo To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?13798.48297.22634.725839>