Date: Wed, 17 Mar 2010 07:24:26 -0400 (Eastern Daylight Time) From: Xihong Yin <xyin@gmx.com> To: freebsd-questions@freebsd.org Subject: Re: NDIS failed under 8.0, please help Message-ID: <alpine.WNT.2.00.1003170723520.1124@BUQ12-8384.ajf.abnn> In-Reply-To: <alpine.BSF.2.00.1003162133080.1391@qryy.zlubzr.jrfgryy.pbz> References: <alpine.BSF.2.00.1003162133080.1391@qryy.zlubzr.jrfgryy.pbz>
next in thread | previous in thread | raw e-mail | index | archive | help
It is resolved by creating wlan0. Xihong On Tue, 16 Mar 2010, Xihong Yin wrote: > The NDIS driver failed after I upgraded from 7.1 to 8.0 Stable, the NDIS > driver was built successfully under 8.0 though. > > The wireless card is a Dell TrueMobile 1300 WLAN Mini-PCI Card. It works > perfectly under 7.2. > > I run > > #ifconfig ndis0 up scan > > and got and error: > > ifconfig: unable to get scan results > > ifconfig ndis0 is > > ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu > 2290 > ether 00:90:4b:c7:f1:01 > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: no carrier > > uname -a is > > FreeBSD dell 8.0-STABLE FreeBSD 8.0-STABLE #0: Tue > Mar 16 06:41:00 EDT 2010 > root@dell:/usr/obj/usr/src/sys/MY8KERNEL i386 > > dmesg is > > Copyright (c) 1992-2010 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 8.0-STABLE #0: Tue Mar 16 06:41:00 EDT 2010 > root@dell:/usr/obj/usr/src/sys/MY8KERNEL i386 > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Celeron(R) M processor 1.40GHz (1396.55-MHz 686-class > CPU) > Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 > Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> > AMD Features=0x100000<NX> > real memory = 268435456 (256 MB) > avail memory = 244703232 (233 MB) > ACPI APIC Table: <DELL CPi R > > ioapic0: Changing APIC ID to 1 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > acpi0: <DELL CPi R > on motherboard > acpi0: [ITHREAD] > acpi0: reservation of 0, 9fc00 (3) failed > acpi0: reservation of 100000, f6d3800 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > cpu0: <ACPI CPU> on acpi0 > acpi_acad0: <AC Adapter> on acpi0 > battery0: <ACPI Control Method Battery> on acpi0 > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_button0: <Power Button> on acpi0 > acpi_button1: <Sleep Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > vgapci0: <VGA-compatible display> port 0xeff8-0xefff mem > 0xdff00000-0xdff7ffff,0xc0000000-0xcfffffff,0xdfec0000-0xdfefffff irq 16 at > device 2.0 on pci0 > agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0 > agp0: detected 7932k stolen memory > agp0: aperture size is 256M > vgapci1: <VGA-compatible display> mem 0xdff80000-0xdfffffff at device 2.1 on > pci0 > hdac0: <Intel 82801F High Definition Audio Controller> mem > 0xdfebc000-0xdfebffff irq 16 at device 27.0 on pci0 > hdac0: HDA Driver Revision: 20100226_0142 > hdac0: [ITHREAD] > pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 > pci11: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0 > pci12: <ACPI PCI bus> on pcib2 > uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port > 0xbf80-0xbf9f irq 16 at device 29.0 on pci0 > uhci0: [ITHREAD] > usbus0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 > uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port > 0xbf60-0xbf7f irq 17 at device 29.1 on pci0 > uhci1: [ITHREAD] > usbus1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 > uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port > 0xbf40-0xbf5f irq 18 at device 29.2 on pci0 > uhci2: [ITHREAD] > usbus2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 > uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port > 0xbf20-0xbf3f irq 19 at device 29.3 on pci0 > uhci3: [ITHREAD] > usbus3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 > ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xb0000000-0xb00003ff > irq 16 at device 29.7 on pci0 > ehci0: [ITHREAD] > usbus4: EHCI version 1.0 > usbus4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 > pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci2: <ACPI PCI bus> on pcib3 > bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xdfbfc000-0xdfbfdfff irq 18 at > device 0.0 on pci2 > miibus0: <MII bus> on bfe0 > bmtphy0: <BCM4401 10/100baseTX PHY> PHY 1 on miibus0 > bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > bfe0: Ethernet address: 00:14:22:90:52:ed > bfe0: [ITHREAD] > ndis0: <Dell TrueMobile 1300 WLAN Mini-PCI Card> mem 0xdfbfe000-0xdfbfffff > irq 17 at device 3.0 on pci2 > ndis0: [ITHREAD] > ndis0: NDIS API version: 5.1 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH6 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 16 at device 31.1 on > pci0 > ata0: <ATA channel 0> on atapci0 > ata0: [ITHREAD] > ata1: <ATA channel 1> on atapci0 > ata1: [ITHREAD] > acpi_tz0: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on > acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: [ITHREAD] > psm0: model Generic PS/2 mouse, device ID 0 > atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0 > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff pnpid > ORM0000 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ppc0: parallel port not found. > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > Timecounter "TSC" frequency 1396547279 Hz quality 800 > Timecounters tick every 1.000 msec > ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based > forwarding disabled, default to accept, logging disabled > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 12Mbps Full Speed USB v1.0 > usbus3: 12Mbps Full Speed USB v1.0 > usbus4: 480Mbps High Speed USB v2.0 > ugen0.1: <Intel> at usbus0 > uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > ugen1.1: <Intel> at usbus1 > uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen2.1: <Intel> at usbus2 > uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > ugen3.1: <Intel> at usbus3 > uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 > ugen4.1: <Intel> at usbus4 > uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 > ad0: 38154MB <WDC WD400VE-75HDT1 11.07D11> at ata0-master UDMA100 acd0: CDRW > <SONY CD-RW/DVD-ROM CRX835E/KDKE> at ata0-slave UDMA33 hdac0: HDA Codec #0: > Sigmatel STAC9220 > hdac0: HDA Codec #1: Conexant (Unknown) > pcm0: <HDA Sigmatel STAC9220 PCM #0 Analog> at cad 0 nid 1 on hdac0 > uhub0: 2 ports with 2 removable, self powered > uhub1: 2 ports with 2 removable, self powered > uhub2: 2 ports with 2 removable, self powered > uhub3: 2 ports with 2 removable, self powered > GEOM: ad0s4: geometry does not match label (255h,63s != 16h,63s). > Root mount waiting for: usbus4 > Root mount waiting for: usbus4 > Root mount waiting for: usbus4 > uhub4: 8 ports with 8 removable, self powered > Trying to mount root from ufs:/dev/ad0s4a > drm0: <Intel i915GM> on vgapci0 > vgapci0: child drm0 requested pci_enable_busmaster > info: [drm] AGP at 0xc0000000 256MB > info: [drm] Initialized i915 1.6.0 20080730 > drm0: [ITHREAD] > drm0: [ITHREAD] > > Please help! > > Thanks, > Xihong > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.WNT.2.00.1003170723520.1124>