Date: Mon, 4 Nov 1996 10:01:10 +0300 From: "Sergey S. Kosyakov" <ks@itp.ac.ru> To: se@zpr.uni-koeln.de Cc: hardware@freebsd.org Subject: Re: SCSI CDROM Message-ID: <199611040701.KAA07181@itp.ac.ru> In-Reply-To: Mail from 'se@zpr.uni-koeln.de (Stefan Esser)' dated: Sun, 3 Nov 1996 23:51:07 %2B0100
next in thread | raw e-mail | index | archive | help
This is an unexpected disconnect.
Did you eject the CD while the drive was active ?
No
Please let me know, what kind of CDROM drive you
are using (best if you send me a boot message log).
And please give more information about the exact
situation that caused this problem: How was the
CDROM used, how was the eject initiated ?
It is CD-R, but with previous FreeBSD SNAP it works fine. I don't know
what was the reason for errors - new SNAP or second NCR I added just
before new SNAP install.
I try "eject" from various programs (workman,xcd,etc) including cdcontrol.
I use this CD-R as CD with MSDOS,Win95 and WinNT - work good.
Below is boot message log:
FreeBSD 2.2-960801-SNAP #0: Thu Oct 31 14:04:52 MSK 1996
ks@speecart.chg.ru:/usr/src/sys/compile/SPEECART
Calibrating clock(s) relative to mc146818A clock...
i586 clock: 119766895 Hz, i8254 clock: 1193331 Hz
CPU: Pentium (119.75-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
avail memory = 30556160 (29840K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82437 (Triton) PCI cache memory controller> rev 2 on pci0:0
chip1 <Intel 82371 (Triton) PCI-ISA bridge> rev 2 on pci0:7:0
piix0 <Intel 82371 (Triton) Bus-master IDE controller> rev 2 on pci0:7:1
vga0 <VGA-compatible display device> rev 67 int a irq 10 on pci0:17
ncr0 <ncr 53c810 scsi> rev 2 int a irq 12 on pci0:18
ncr0 waiting for scsi devices to settle
(ncr0:6:0): "SONY CD-R CDU920S 2.0b" type 5 removable SCSI 2
cd0(ncr0:6:0): CD-ROM
cd0(ncr0:6:0): 250ns (4 Mb/sec) offset 8.
cd0(ncr0:6:0): UNIT ATTENTION asc:28,0
cd0(ncr0:6:0): Not ready to ready transition, medium may have changed
cd present [400000 x 2048 byte records]
ncr1 <ncr 53c815 scsi> rev 3 int a irq 5 on pci0:19
ncr1 waiting for scsi devices to settle
"DEC TZ87 (C) DEC 9514" type 1 removable SCSI 2
st0(ncr1:1:0): Sequential-Access
st0(ncr1:1:0): 200ns (5 Mb/sec) offset 8.
density code 0x19, variable blocks, write-enabled
de0 <Digital DC21041 Ethernet> rev 17 int a irq 11 on pci0:20
de0: DC21041 [10Mb/s] pass 1.1
de0: address 00:00:c0:f8:d0:c2
Probing for devices on the ISA bus:
.....................................
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199611040701.KAA07181>