Date: Mon, 10 Dec 2001 11:17:54 +0000 From: Brian Somers <brian@freebsd-services.com> To: Richard =?utf-8?B?xIxlcGFz?= <rch@richard.eu.org> Cc: Brian Somers <brian@freebsd-services.com>, Matthew Emmerton <matt@gsicomp.on.ca>, freebsd-questions@FreeBSD.ORG, brian@freebsd-services.com Subject: Re: userland ppp goes into loop after link goes down Message-ID: <200112101117.fBABHsE88543@hak.lan.Awfulhak.org> In-Reply-To: Message from Richard =?utf-8?B?xIxlcGFz?= <rch@richard.eu.org> of "Mon, 10 Dec 2001 12:33:07 %2B0200." <20011210123307.D99801@richard.eu.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi,
I just re-read your message. Can I confirm that you use -ddial, and =
never use -dedicated for your PPPoE setup ? -dedicated is not at all =
suitable for PPPoE as it will never re-open the link, and therefore =
will never re-do the PPPoE discovery stuff.
> Hi,
> =
> Hmm, I had it:
> * $FreeBSD: src/usr.sbin/ppp/datalink.c,v 1.57.2.9 2001/10/26 10:00:39=
brian Exp $
> -r-sr-xr-- 1 root network 315328 Dec 4 02:12 /usr/sbin/ppp*
> And in log:
> =
> Dec 8 21:44:42 richard ppp[87211]: tun0: CCP: deflink: State change St=
opped --> Closed =
> Dec 8 21:44:42 richard ppp[87211]: tun0: CCP: deflink: State change Cl=
osed --> Initial =
> Dec 8 21:44:42 richard ppp[87211]: tun0: Phase: deflink: open -> lcp =
> Dec 8 21:44:42 richard ppp[87211]: tun0: IPCP: deflink: LayerDown: 213=
=2E190.39.170 =
> Dec 8 21:44:42 richard ppp[87211]: tun0: IPCP: deflink: State change O=
pened --> Starting =
> Dec 8 21:44:42 richard ppp[87211]: tun0: IPCP: deflink: LayerFinish. =
> Dec 8 21:44:42 richard ppp[87211]: tun0: IPCP: Connect time: 300 secs:=
0 octets in, 0 octets out =
> Dec 8 21:44:42 richard ppp[87211]: tun0: IPCP: : 0 packets in, 0 packe=
ts out =
> Dec 8 21:44:42 richard ppp[87211]: tun0: IPCP: total 0 bytes/sec, pea=
k 0 bytes/sec on Sat Dec 8 21:44:42 2001 =
> Dec 8 21:44:42 richard ppp[87211]: tun0: IPCP: deflink: State change S=
tarting --> Initial =
> Dec 8 21:44:42 richard ppp[87211]: tun0: Phase: bundle: Terminate =
> Dec 8 21:44:42 richard ppp[87211]: tun0: Phase: Received NGM_PPPOE_CLO=
SE (hook "tun0") =
> Dec 8 21:44:42 richard ppp[87211]: tun0: Phase: deflink: Device discon=
nected =
> Dec 8 21:44:42 richard ppp[87211]: tun0: Phase: deflink: Disconnected!=
=
> Dec 8 21:44:42 richard ppp[87211]: tun0: Phase: deflink: lcp -> logout=
=
> Dec 8 21:44:42 richard ppp[87211]: tun0: Phase: deflink: Disconnected!=
=
> Dec 8 21:44:42 richard ppp[87211]: tun0: Phase: deflink: logout -> han=
gup =
> Dec 8 21:44:42 richard ppp[87211]: tun0: Phase: deflink: Connect time:=
303 secs: 215 octets in, 328 octets out =
> Dec 8 21:44:42 richard ppp[87211]: tun0: Phase: deflink: : 14 packets =
in, 16 packets out =
> Dec 8 21:44:42 richard ppp[87211]: tun0: Phase: total 1 bytes/sec, pe=
ak 85 bytes/sec on Sat Dec 8 21:44:42 2001 =
> Dec 8 21:44:42 richard ppp[87211]: tun0: Phase: deflink: hangup -> clo=
sed =
> Dec 8 21:44:42 richard ppp[87211]: tun0: Phase: bundle: Dead =
> Dec 8 21:44:42 richard ppp[87211]: tun0: Phase: PPP Terminated (normal=
). =
> =
> I'm using now shell loop around ppp -foreground as a workaround.
> =
> On Mon Dec 10 10:17:12 2001 +0000 Brian Somers wrote:
> =
> >Hi,
> >
> >This should have been fixed in -stable with usr.sbin/ppp/datalink.c =
> >revision 1.57.2.9 which was MFC'd on October 26.
> >
> >
> >> Yes, I believe this is similar to a problem I was seeing a few month=
s back.
> >> Brian had a patch (which fixed the problem) and it was fixed in -CUR=
RENT;
> >> I'm not sure if it's been MFC'd yet and/or when it will make it to
> >> a -RELEASE.
> >> =
> >> Brian, can you confirm/deny?
> >> =
> >> --
> >> Matt Emmerton
> >> =
> >> > Hi,
> >> >
> >> > I'm using 'ppp' with pppoe in dedicated or ddial mode and sometime=
s link
> >> goes down probably because of some problems on remote server. The p=
roblem
> >> is that 'ppp' after that goes into dead loop and you need to kill it=
and
> >> restart manually. Is it a known problem with 'ppp'?
> >> >
> >> > Dec 8 09:00:01 richard ppp[124]: tun0: Phase: deflink: write (1):=
Socket
> >> is not connected
> >> > Dec 8 09:00:01 richard ppp[124]: tun0: Phase: deflink: Disconnect=
ed!
> >> > Dec 8 09:00:01 richard ppp[124]: tun0: Phase: deflink: write (1):=
Socket
> >> is not connected
> >> > Dec 8 09:00:01 richard ppp[124]: tun0: Phase: deflink: Disconnect=
ed!
> >> > Dec 8 09:00:02 richard ppp[124]: tun0: Phase: deflink: write (1):=
Socket
> >> is not connected
> >> > Dec 8 09:00:02 richard ppp[124]: tun0: Phase: deflink: Disconnect=
ed!
> >> > Dec 8 09:00:02 richard ppp[124]: tun0: Phase: deflink: write (1):=
Socket
> >> is not connected
> >> > Dec 8 09:00:02 richard ppp[124]: tun0: Phase: deflink: Disconnect=
ed!
> >> > Dec 8 09:00:02 richard ppp[124]: tun0: Phase: deflink: write (1):=
Socket
> >> is not connected
> >> >
> >> > dsl:
> >> > set timeout 0
> >> > #set log All
> >> > set device PPPoE:ed0
> >> > set dial
> >> > set authname ******
> >> > set authkey ******
> >> > set ifaddr 213.190.39.245/16 0
> >> > set lqr
> >> > set server /var/run/internet "" 0177
[.....]
> -- =
> =E2=98=BB Ri=C4=8Dardas =C4=8Cepas =E2=98=BA
> ~~
> ~
-- =
Brian <brian@freebsd-services.com> <brian@Awfulhak.org>
http://www.freebsd-services.com/ <brian@[uk.]FreeBSD.org>
Don't _EVER_ lose your sense of humour ! <brian@[uk.]OpenBSD.org>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200112101117.fBABHsE88543>