Date: Wed, 15 Feb 2012 19:04:56 +0100 From: peter knezel <peter.knezel@gmail.com> To: Damien Fleuriot <ml@my.gd> Cc: freebsd-questions@freebsd.org Subject: Re: From analysis of a simple ifstated.conf to more compex example Message-ID: <CAAwfu_=5-t0=C2_2ZeK5cf3N-e5_%2BiZPGLPk9S-Tks78sKpVYA@mail.gmail.com> In-Reply-To: <4F3BEA73.9060005@my.gd> References: <CAAwfu_n%2BVjgeihzWRa1F6v6PhCA943sFHR7eFxA1Ycc8NbjXpQ@mail.gmail.com> <4F314AFB.8080901@my.gd> <CAAwfu_kfj2mqT9qVSh2_9LpfcvOrxBJiwNRi_x79VcjGQLwGqw@mail.gmail.com> <4F3BEA73.9060005@my.gd>
next in thread | previous in thread | raw e-mail | index | archive | help
Well,
I am not fully familiar with CARP, but if the different carp interfaces are
used for different purpose (ftp, tftp, scp), is it a good idea to put down
all of them, if they are able to serve their purpose?
BTW, what is CARP preemption and how is it possible to enable it?
Kind regards,
Peter
On 15 February 2012 18:25, Damien Fleuriot <ml@my.gd> wrote:
> Sorry about the late reply, didn't see yours.
>
> What about enabling CARP preemption to ensure that when a carp interface
> goes down, the whole set does ?
>
>
> On 2/7/12 9:13 PM, peter knezel wrote:
> > Hello Damien,
> >
> > I did read your example but cannot get idea from it.
> > For three interfaces you have much more possibilities.
> >
> > Imagine you start the server from uuu state which is equal to
> > net = '( "ifconfig -a -u |grep carp0 > /dev/null" every 3 && "ifconfig
> -a -u
> > |grep carp1 > /dev/null" every 3 && "ifconfig -a -u |grep carp2 >
> /dev/null"
> > every 3)'
> >
> > Now you put down one carp interface - so system is in state :
> > *state one:*
> > (duu) || (udu) || (uud) <----which is same as !$net
> > run script1.sh
> > go to twoff
> >
> > now imagine, you put down any other carp interface:
> > *state twoff: *
> > (dud) || (ddu) || (udd)
> > run script2.sh
> > go to two
> >
> > *state two: *
> > put all interfaces up
> > run script3.sh
> > go to state one
> >
> > it means, this is one of the possibilities system can behave (this
> > situation does not describe all possible states - I have taken this
> > special example.)
> >
> > Now if you want to put up after putting down one carp interface, you
> > fail since it is in state twoff.
> > Only of you put down second carp interface it goes to state two and if
> > you put both up, it will go to state one.
> >
> > This is where my ifstated.conf fails to work.
> >
> > Kind regards,
> >
> > Peter Knezel
> >
> >
> > On 7 February 2012 17:02, Damien Fleuriot <ml@my.gd <mailto:ml@my.gd>>
> > wrote:
> >
> > On 2/7/12 3:36 PM, peter knezel wrote:
> > > Hello all,
> > >
> > > I would like to ask somebody to explain me how the ifstated works
> > according to
> > > the following configuration file.
> > > I have three virtual carp interfaces carp0,carp1 and carp2.
> > >
> > > I try to understand the following setting:
> > > The server is in state one (all carp interfaces are up) and if
> there
> > > is carp down of any:
> > > one (carp0 or carp1 or carp2),
> > > two ([carp0 and carp1] or [carp0 and carp2] or [carp1 and carp2]),
> > > three interfaces (carp 0 and carp1 and carp2), server
> > > runs the script testdown.sh and put the server into state two.
> > > If all carp interfaces are up, the server runs the testup.sh and
> set
> > > the state to one.
> > >
> >
> > That is my understanding.
> >
> >
> > > Is it the way the system works?
> > > Or am I wrong?
> > >
> > > ===
> > > init-state one
> > >
> > > net = '( "ifconfig -a -u |grep carp0 > /dev/null" every 3 &&
> > "ifconfig -a -u
> > > |grep carp1 > /dev/null" every 3 && "ifconfig -a -u |grep carp2 >
> > /dev/null"
> > > every 3)'
> > >
> > > state one {
> > > if ( ! $net ) {
> > > run "/usr/local/testdown.sh"
> > > set-state two
> > > }
> > > }
> > >
> > > state two {
> > > if ( $net ) {
> > > run "/usr/local/testup.sh"
> > > set-state one
> > > }
> > > }
> > > ===
> > >
> > > Is there any possibility to define and set ifstated.conf that
> > reacts when:
> > >
> > > any one of the carp interfaces is down - followed by another any
> > > other carp interface down
> > >
> > >
> > > I tried to define states:
> > >
> > > duu ="!carp0.link.up && carp1.link.up && carp2.link.up"
> > > udu ="carp0.link.up && !carp1.link.up && carp2.link.up"
> > > uud ="carp0.link.up && carp1.link.up && !carp2.link.up"
> > > ddu ="!carp0.link.up && !carp1.link.up"
> > > dud ="!carp0.link.up && !carp2.link.up"
> > > udd ="!carp1.link.up && !carp2.link.up"
> > >
> > > and used them but somehow I cannot incorporate all state changes
> and
> > > include it in ifstated.conf.
> > >
> >
> >
> > Works fine here, did you not have any luck with the file I posted
> > earlier ?
> > _______________________________________________
> > freebsd-questions@freebsd.org <mailto:freebsd-questions@freebsd.org>
> > mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > To unsubscribe, send any mail to
> > "freebsd-questions-unsubscribe@freebsd.org
> > <mailto:freebsd-questions-unsubscribe@freebsd.org>"
> >
> >
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAAwfu_=5-t0=C2_2ZeK5cf3N-e5_%2BiZPGLPk9S-Tks78sKpVYA>