From owner-freebsd-questions  Thu Aug 24 19:02:38 1995
Return-Path: questions-owner
Received: (from majordom@localhost)
          by freefall.FreeBSD.org (8.6.11/8.6.6) id TAA16257
          for questions-outgoing; Thu, 24 Aug 1995 19:02:38 -0700
Received: from ultrix (ultrix.ramapo.edu [192.107.108.3])
          by freefall.FreeBSD.org (8.6.11/8.6.6) with SMTP id TAA16251
          for <questions@freebsd.org>; Thu, 24 Aug 1995 19:02:35 -0700
Received: by ultrix (5.65/Ultrix3.0-C)
	id AA09924; Thu, 24 Aug 1995 22:03:44 -0400
Date: Thu, 24 Aug 1995 22:03:44 -0400
From: dwreski@ultrix.ramapo.edu (Dave Wreski)
Message-Id: <9508250203.AA09924@ultrix>
To: questions@freebsd.org
Subject: XF86Config question..
Sender: questions-owner@freebsd.org
Precedence: bulk


Hi.  I understand someone here might be able to help me with my xconfig.

I have a Diamond Stealth Video 64 VRAM and an AcerView 76i, 17" monitor.
X starts and runs pretty well, but the left side seems to 'fold' or 'roll'
into the right side.  So, if I move a window past the left side, it appears
on the right side.  I was hoping someone might have a similar xconfig 
that they could share. So far, I have:

(--) S3: card type: PCI
(--) S3: chipset:   968 rev. 31
(--) S3: chipset driver: mmio_928
(**) S3: videoram:  2048k
(--) S3: Detected a TI ViewPoint 3026 RAMDAC rev. 11
(--) S3: Ramdac type: ti3026
(--) S3: Ramdac speed: 135
(--) S3: Using hardware cursor from Ti3026 RAMDAC
(--) S3: Using TI 3026 programmable clock (MCLK 63.000 MHz)
(--) S3: Maximum allowed dot-clock: 135.000 MHz
(**) S3: Mode "1024x768": mode clock =  85.000
(**) S3: Mode "800x600": mode clock =  50.000
(**) S3: Mode "640x480": mode clock =  31.500
(--) S3: Operating RAMDAC in pixel multiplex mode
(**) S3: Using 16 bpp.  Color weight: 565
(**) S3: Virtual resolution set to 1024x768

Should I be using the mmio_928, or s3_generic chipset driver? They both seem
to look the same, and seeing how there is no 968 driver...

Thanks for any ideas,
Dave Wreski
dwreski@ultrix.ramapo.edu

ps, if this is a mailing list, please advise how to join, and please forward
any replies to me, as I have not joined yet :)