From owner-freebsd-current@FreeBSD.ORG Mon Jan 19 02:36:21 2004 Return-Path: Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E6E2816A4CE for ; Mon, 19 Jan 2004 02:36:21 -0800 (PST) Received: from butler.cc.tut.fi (butler.cc.tut.fi [130.230.102.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id 04E4A43D2F for ; Mon, 19 Jan 2004 02:36:15 -0800 (PST) (envelope-from mjs@cc.tut.fi) Received: from butler.cc.tut.fi (mjs@localhost [127.0.0.1]) by butler.cc.tut.fi (8.12.10/8.12.5) with ESMTP id i0JAaBhH021696 for ; Mon, 19 Jan 2004 12:36:11 +0200 (EET) Received: (from mjs@localhost) by butler.cc.tut.fi (8.12.10/8.12.5/Submit) id i0JAaAep021693; Mon, 19 Jan 2004 12:36:10 +0200 (EET) X-Authentication-Warning: butler.cc.tut.fi: mjs set sender to mjs@cc.tut.fi using -f To: freebsd-current@freebsd.org From: Matti Saarinen Date: Mon, 19 Jan 2004 12:36:10 +0200 Message-ID: User-Agent: Gnus/5.1002 (Gnus v5.10.2) Emacs/21.3 (usg-unix-v) MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="=-=-=" Subject: 5.2R: panic (syncer) on IBM x345 (SMP and Vinum) X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Jan 2004 10:36:22 -0000 --=-=-= I've been able to crash a server (usenet news server) running 5.2R. The crash happens with and without ACPI. The attached info is with ACPI enabled. I would be very pleased if someone could tell me why the box crashed and how to prevent it from happening. I tried searching the list archives and googling wihout any positive result. The hardware is IBM x345 with two CPUs (Pentium4), internal LSI SCSI/RAID controller and external IBM SCSI controller (which is really Adaptec SCSI Card 29320LP). There is IBM ESX400 disk array connected to the Adaptec controller. All the disks are U320 disk. The root filesystem is mirrored with the LSI adapter (which only supports mirroring of two drives). There are three other mirrored filesystems created with vinum. On all file systems except root, I've enabled soft updates. I've tested all the filesystems (mirrored root, vinum mirrors and filesystems created on single disks) with bonnie++ and iozone and the server has behaved well. The disk layout is following (da0-6 are connected to the Adaptec controller and the rest to the LSI controller): #df Filesystem 512-blocks Used Avail Capacity Mounted on /dev/da16s1a 2025948 150456 1713420 8% / devfs 2 2 0 100% /dev /dev/da16s1h 12172084 147124 11051196 1% /home /dev/da16s1g 4052060 17744 3710152 0% /tmp /dev/da16s1d 52808984 4025312 44558956 8% /usr /dev/da16s1e 40616796 172624 37194832 0% /news /dev/da16s1f 10154076 15368 9326384 0% /var /dev/vinum/news_db 138862504 284336 127469168 0% /news/db /dev/vinum/overview 138862504 168888 127584616 0% /overview /dev/vinum/fispool 138862504 125891528 1861976 99% /cnfs/fispool /dev/da2a 138862772 125891536 1862216 99% /cnfs/altspool /dev/da3a 138862772 125891528 1862224 99% /cnfs/altspool/bin1 /dev/da4a 138862772 125891528 1862224 99% /cnfs/altspool/bin2 /dev/da5a 138862772 125891528 1862224 99% /cnfs/therest/1 /dev/da6a 138862772 126916072 837680 99% /cnfs/therest/2 procfs 8 8 0 100% /proc #vinum l 6 drives: D vinumdrive3 State: up /dev/da21a A: 0/70006 MB (0%) D vinumdrive2 State: up /dev/da20a A: 0/70006 MB (0%) D vinumdrive1 State: up /dev/da19a A: 0/70006 MB (0%) D vinumdrive0 State: up /dev/da18a A: 0/70006 MB (0%) D vinumdrive5 State: up /dev/da1a A: 0/70006 MB (0%) D vinumdrive4 State: up /dev/da0a A: 0/70006 MB (0%) 3 volumes: V news_db State: up Plexes: 2 Size: 68 GB V overview State: up Plexes: 2 Size: 68 GB V fispool State: up Plexes: 2 Size: 68 GB 6 plexes: P news_db.p0 C State: up Subdisks: 1 Size: 68 GB P news_db.p1 C State: up Subdisks: 1 Size: 68 GB P overview.p0 C State: up Subdisks: 1 Size: 68 GB P overview.p1 C State: up Subdisks: 1 Size: 68 GB P fispool.p0 C State: up Subdisks: 1 Size: 68 GB P fispool.p1 C State: up Subdisks: 1 Size: 68 GB 6 subdisks: S news_db.p0.s0 State: up D: vinumdrive0 Size: 68 GB S news_db.p1.s0 State: up D: vinumdrive1 Size: 68 GB S overview.p0.s0 State: up D: vinumdrive2 Size: 68 GB S overview.p1.s0 State: up D: vinumdrive3 Size: 68 GB S fispool.p0.s0 State: up D: vinumdrive4 Size: 68 GB S fispool.p1.s0 State: up D: vinumdrive5 Size: 68 GB Now, I installed INN (cnfs + ovdb) and a test newfeed which puts stress mainly on /news/db, /overview and /cnfs/fispool. When I started the feed to the server, everething worked fine for a couple of minutes and the a crash. The logs show following: (da0:ahd0:0:0:0): Retrying Command (da0:ahd0:0:0:0): Queue Full (da0:ahd0:0:0:0): tagged openings now 128 (da0:ahd0:0:0:0): Retrying Command Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address = 0x0 fault code = supervisor write, page not present instruction pointer = 0x8:0xc07bcafe stack pointer = 0x10:0xe7b96784 frame pointer = 0x10:0xe7b967c0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 79 (syncer) Attached below are the verbose boot logs from the server and the kernel debugger output. --=-=-= Content-Disposition: attachment; filename=news-boot-acpi-verbose Console:internalvideo/keyboard BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS drive D: is disk2 BIOS drive E: is disk3 BIOS drive F: is disk4 BIOS drive G: is disk5 BIOS drive H: is disk6 BIOS drive I: is disk7 BIOS drive J: is disk8 BIOS 628kB/3996588kB available memory FreeBSD/i386 bootstrap loader,Revision 1.1 (root@news.cc.tut.fi, Tue Jan 13 13:23:58EET2004) Loading/boot/defaults/loader.conf /boot/kernel/kernel text=0x43d838 data=0x7621c+0x499c0 syms=[0x4+0x53c90+0x4+0x66a51] /boot/kernel/vinum.ko text=0x14fec data=0x3bc+0xb0f84 syms=[0x4+0x1200+0x4+0xd00] /boot/kernel/acpi.ko text=0x3f104 data=0x1724+0x114c syms=[0x4+0x6260+0x4+0x8075] SMAP type=01 base=0000000000000000 len=000000000009d000 SMAP type=02 base=000000000009d000 len=0000000000003000 SMAP type=02 base=00000000000e0000 len=0000000000020000 SMAP type=01 base=0000000000100000 len=00000000f3eeb2c0 SMAP type=02 base=00000000f3ff0000 len=0000000000010000 SMAP type=03 base=00000000f3feb2c0 len=0000000000004d40 SMAP type=01 base=0000000100000000 len=000000002c000000 720896K of memory above 4GB ignored SMAP type=02 base=00000000fec00000 len=0000000001400000 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-RELEASE #3: Mon Jan 19 10:31:15 EET 2004 root@news.cc.tut.fi:/usr/obj/usr/src/sys/NEWS Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ad5000. Preloaded elf module "/boot/kernel/vinum.ko" at 0xc0ad521c. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ad52c8. Calibrating clock(s) ... i8254 clock: 1193164 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2793891812 Hz CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.89-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff Hyperthreading: 2 logical CPUs real memory = 4093554688 (3903 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c29000 - 0x00000000efb24fff, 4008689664 bytes (978684 pages) avail memory = 3978731520 (3794 MB) Table 'FACP' at 0xf3feff00 Table 'APIC' at 0xf3fefe40 MADT: Found table at 0xf3fefe40 MP Configuration Table version 1.4 found at 0xc009de60 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 6 ACPI ID 1: enabled SMP: Added CPU 6 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 7 ACPI ID 3: enabled SMP: Added CPU 7 (AP) ACPI APIC Table: APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 APIC ID: physical 6, logical 0:2 APIC ID: physical 7, logical 0:3 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 bios32: Found BIOS32 Service Directory header at 0xc00fd790 bios32: Entry = 0xfd7a1 (c00fd7a1) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xd7dc pnpbios: Found PnP BIOS data at 0xc00fdf90 pnpbios: Entry = f0000:43a6 Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 2 APIC: CPU 2 has ACPI ID 1 APIC: CPU 3 has ACPI ID 3 MADT: Found IO APIC ID 14, Vector 0 at 0xfec00000 ioapic0: intpin 0 -> ExtINT (edge, activehi) ioapic0: intpin 1 -> irq 1 (edge, activehi) ioapic0: intpin 2 -> irq 2 (edge, activehi) ioapic0: intpin 3 -> irq 3 (edge, activehi) ioapic0: intpin 4 -> irq 4 (edge, activehi) ioapic0: intpin 5 -> irq 5 (edge, activehi) ioapic0: intpin 6 -> irq 6 (edge, activehi) ioapic0: intpin 7 -> irq 7 (edge, activehi) ioapic0: intpin 8 -> irq 8 (edge, activehi) ioapic0: intpin 9 -> irq 9 (edge, activehi) ioapic0: intpin 10 -> irq 10 (edge, activehi) ioapic0: intpin 11 -> irq 11 (edge, activehi) ioapic0: intpin 12 -> irq 12 (edge, activehi) ioapic0: intpin 13 -> irq 13 (edge, activehi) ioapic0: intpin 14 -> irq 14 (edge, activehi) ioapic0: intpin 15 -> irq 15 (edge, activehi) MADT: Found IO APIC ID 13, Vector 16 at 0xfec01000 ioapic1: intpin 0 -> irq 16 (level, activelo) ioapic1: intpin 1 -> irq 17 (level, activelo) ioapic1: intpin 2 -> irq 18 (level, activelo) ioapic1: intpin 3 -> irq 19 (level, activelo) ioapic1: intpin 4 -> irq 20 (level, activelo) ioapic1: intpin 5 -> irq 21 (level, activelo) ioapic1: intpin 6 -> irq 22 (level, activelo) ioapic1: intpin 7 -> irq 23 (level, activelo) ioapic1: intpin 8 -> irq 24 (level, activelo) ioapic1: intpin 9 -> irq 25 (level, activelo) ioapic1: intpin 10 -> irq 26 (level, activelo) ioapic1: intpin 11 -> irq 27 (level, activelo) ioapic1: intpin 12 -> irq 28 (level, activelo) ioapic1: intpin 13 -> irq 29 (level, activelo) ioapic1: intpin 14 -> irq 30 (level, activelo) ioapic1: intpin 15 -> irq 31 (level, activelo) MADT: Found IO APIC ID 12, Vector 32 at 0xfec02000 ioapic2: intpin 0 -> irq 32 (level, activelo) ioapic2: intpin 1 -> irq 33 (level, activelo) ioapic2: intpin 2 -> irq 34 (level, activelo) ioapic2: intpin 3 -> irq 35 (level, activelo) ioapic2: intpin 4 -> irq 36 (level, activelo) ioapic2: intpin 5 -> irq 37 (level, activelo) ioapic2: intpin 6 -> irq 38 (level, activelo) ioapic2: intpin 7 -> irq 39 (level, activelo) ioapic2: intpin 8 -> irq 40 (level, activelo) ioapic2: intpin 9 -> irq 41 (level, activelo) ioapic2: intpin 10 -> irq 42 (level, activelo) ioapic2: intpin 11 -> irq 43 (level, activelo) ioapic2: intpin 12 -> irq 44 (level, activelo) ioapic2: intpin 13 -> irq 45 (level, activelo) ioapic2: intpin 14 -> irq 46 (level, activelo) ioapic2: intpin 15 -> irq 47 (level, activelo) MADT: intr override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: active-hi lapic0: Routing NMI -> LINT1 MADT: Ignoring local NMI routed to ACPI CPU 6 lapic6: Routing NMI -> LINT1 MADT: Ignoring local NMI routed to ACPI CPU 7 ioapic2 irqs 32-47 on motherboard ioapic1 irqs 16-31 on motherboard ioapic0 irqs 0-15 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff wlan: <802.11 Link Layer> null: random: mem: Pentium Pro MTRR support enabled npx0: [FAST] stray irq13 npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80021800 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00141166) pcibios: BIOS version 2.10 AcpiOsDerivePciId: bus 0 dev 15 func 2 acpi0: Power Button (fixed) ACPI timer looks BAD min = 3, max = 6, width = 3 ACPI timer looks BAD min = 3, max = 6, width = 3 ACPI timer looks BAD min = 3, max = 6, width = 3 ACPI timer looks BAD min = 3, max = 6, width = 3 ACPI timer looks BAD min = 3, max = 6, width = 3 ACPI timer looks BAD min = 3, max = 6, width = 3 ACPI timer looks BAD min = 3, max = 6, width = 3 ACPI timer looks BAD min = 3, max = 6, width = 3 ACPI timer looks BAD min = 3, max = 6, width = 3 ACPI timer looks BAD min = 3, max = 6, width = 3 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 16 func 0 AcpiOsDerivePciId: bus 0 dev 16 func 2 AcpiOsDerivePciId: bus 0 dev 17 func 0 AcpiOsDerivePciId: bus 0 dev 17 func 2 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x488-0x48b on acpi0 acpi_cpu0: on acpi0 acpi_cpu1: on acpi0 acpi_cpu2: on acpi0 acpi_cpu3: on acpi0 pcib0: on acpi0 ---- initial configuration ------------------------ \LPUS irq 3: [ 3] low,level,sharable 0.15.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \LPUS irq 3: [ 3] low,level,sharable 0.15.0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1166, dev=0x0014, revid=0x33 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0014, revid=0x00 bus=0, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0014, revid=0x00 bus=0, slot=0, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base fd000000, size 24, enabled map[14]: type 4, range 32, base 00002400, size 8, enabled map[18]: type 1, range 32, base febff000, size 12, enabled pcib0: matched entry for 0.6.INTA (source ) pcib0: device is hardwired to IRQ 26 found-> vendor=0x1002, dev=0x4752, revid=0x27 bus=0, slot=6, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=26 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x1166, dev=0x0201, revid=0x93 bus=0, slot=15, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x2200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 00000700, size 4, enabled found-> vendor=0x1166, dev=0x0212, revid=0x93 bus=0, slot=15, func=1 class=01-01-82, hdrtype=0x00, mfdev=1 cmdreg=0x0155, statreg=0x0200, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base febfe000, size 12, enabled pcib0: matched entry for 0.15.INTA (source \LPUS) pcib0: slot 15 INTA is routed to irq 3 found-> vendor=0x1166, dev=0x0220, revid=0x05 bus=0, slot=15, func=2 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=3 found-> vendor=0x1166, dev=0x0225, revid=0x00 bus=0, slot=15, func=3 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0144, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0101, revid=0x05 bus=0, slot=16, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0101, revid=0x05 bus=0, slot=16, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0101, revid=0x05 bus=0, slot=17, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0101, revid=0x05 bus=0, slot=17, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0: at device 6.0 (no driver attached) atapci0: port 0x700-0x70f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=01 ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata0-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: simplex device, DMA on primary only ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] ohci0: mem 0xfebfe000-0xfebfefff irq 3 at device 15.2 on pci0 ohci0: (New OHCI DeviceId=0x02201166) usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered isab0: at device 15.3 on pci0 isa0: on isab0 pcib1: on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci2: on pcib1 pci2: physical bus=2 map[10]: type 4, range 32, base 00002500, size 8, enabled map[14]: type 1, range 64, base fbffe000, size 13, enabled map[1c]: type 4, range 32, base 00002600, size 8, enabled pcib1: matched entry for 2.3.INTA (source ) pcib1: device is hardwired to IRQ 20 found-> vendor=0x9005, dev=0x8014, revid=0x03 bus=2, slot=3, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns) intpin=a, irq=20 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit ahd0: port 0x2600-0x26ff,0x2500-0x25ff mem 0xfbffe000-0xfbffffff irq 20 at device 3.0 on pci2 ahd0: Defaulting to MEMIO on ahd0: Reading VPD from SEEPROM...ahd0: VPD parsing successful ahd0: Reading SEEPROM...done. ahd0: STPWLEVEL is on ahd0: Manual Secondary Termination ahd0: Primary High byte termination Enabled ahd0: Primary Low byte termination Enabled ahd0: Secondary High byte termination Disabled ahd0: Secondary Low byte termination Disabled ahd0: Downloading Sequencer Program... 710 instructions downloaded ahd0: Features 0x1, Bugs 0x8fffff, Flags 0x43f1 aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs pcib2: on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci4: on pcib2 pci4: physical bus=4 pcib3: on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci6: on pcib3 pci6: physical bus=6 map[10]: type 1, range 64, base f9fe0000, size 17, enabled map[20]: type 4, range 32, base 00002700, size 6, enabled pcib3: matched entry for 6.8.INTA (source ) pcib3: device is hardwired to IRQ 29 found-> vendor=0x8086, dev=0x1010, revid=0x01 bus=6, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=29 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base f9fc0000, size 17, enabled map[20]: type 4, range 32, base 00002740, size 6, enabled pcib3: matched entry for 6.8.INTB (source ) pcib3: device is hardwired to IRQ 30 found-> vendor=0x8086, dev=0x1010, revid=0x01 bus=6, slot=8, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=b, irq=30 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit em0: port 0x2700-0x273f mem 0xf9fe0000-0xf9ffffff irq 29 at device 8.0 on pci6 em0: bpf attached em0: Speed:N/A Duplex:N/A em1: port 0x2740-0x277f mem 0xf9fc0000-0xf9fdffff irq 30 at device 8.1 on pci6 em1: bpf attached em1: Speed:N/A Duplex:N/A pcib4: on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci8: on pcib4 pci8: physical bus=8 map[10]: type 4, range 32, base 00002800, size 8, enabled map[14]: type 1, range 64, base f7ff0000, size 16, enabled map[1c]: type 1, range 64, base f7fe0000, size 16, enabled pcib4: matched entry for 8.7.INTA (source ) pcib4: device is hardwired to IRQ 27 found-> vendor=0x1000, dev=0x0030, revid=0x07 bus=8, slot=7, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x48 (2160 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns) intpin=a, irq=27 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 4, range 32, base 00002900, size 8, enabled map[14]: type 1, range 64, base f7fd0000, size 16, enabled map[1c]: type 1, range 64, base f7fc0000, size 16, enabled pcib4: matched entry for 8.7.INTB (source ) pcib4: device is hardwired to IRQ 28 found-> vendor=0x1000, dev=0x0030, revid=0x07 bus=8, slot=7, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x48 (2160 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns) intpin=b, irq=28 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit mpt0: port 0x2800-0x28ff mem 0xf7fe0000-0xf7feffff,0xf7ff0000-0xf7ffffff irq 27 at device 7.0 on pci8 mpt0: soft reset mpt1: port 0x2900-0x29ff mem 0xf7fc0000-0xf7fcffff,0xf7fd0000-0xf7fdffff irq 28 at device 7.1 on pci8 mpt1: linking with peer (mpt0) mpt1: soft reset atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: unable to set the command byte. device_probe_and_attach: atkbd0 attach returned 6 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0065 psm: failed to restore the keyboard controller command byte. psm0: unable to set the command byte. fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x6001 0x6011 0x6001 0x6001 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console unknown: not probed (disabled) unknown: not probed (disabled) unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: