From owner-freebsd-current Thu Nov 28 12:34:33 1996 Return-Path: owner-current Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id MAA11963 for current-outgoing; Thu, 28 Nov 1996 12:34:33 -0800 (PST) Received: from po7.andrew.cmu.edu (PO7.ANDREW.CMU.EDU [128.2.10.107]) by freefall.freebsd.org (8.7.5/8.7.3) with ESMTP id MAA11958 for ; Thu, 28 Nov 1996 12:34:31 -0800 (PST) Received: (from postman@localhost) by po7.andrew.cmu.edu (8.8.2/8.8.2) id PAA05614 for current@freebsd.org; Thu, 28 Nov 1996 15:34:28 -0500 Received: via switchmail; Thu, 28 Nov 1996 15:34:27 -0500 (EST) Received: from unix23.andrew.cmu.edu via qmail ID ; Thu, 28 Nov 1996 15:32:37 -0500 (EST) Received: from unix23.andrew.cmu.edu via qmail ID ; Thu, 28 Nov 1996 15:32:37 -0500 (EST) Received: from mms.4.60.Jun.27.1996.03.02.53.sun4.51.EzMail.2.0.CUILIB.3.45.SNAP.NOT.LINKED.unix23.andrew.cmu.edu.sun4m.54 via MS.5.6.unix23.andrew.cmu.edu.sun4_51; Thu, 28 Nov 1996 15:32:36 -0500 (EST) Message-ID: Date: Thu, 28 Nov 1996 15:32:36 -0500 (EST) From: Yun-Ching Lee To: current@freebsd.org Subject: 2.2-ALPHA kills AHA 2940AU BIOS Sender: owner-current@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I just got 2.2-ALPHA installed on my system, a IBM 6x86 133/P166+. The 2.2-ALPHA generic kernel starts fine, but when I want to reboot, the Adaptec BIOS hangs when scanning the SCSI bus. However, the SCSIselect utility sees both of my devices fine. I'm going to fetch the latest 3.0-CURRENT kernel and try that. Here's my kernel -v message: Copyright (c) 1992-1996 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2-ALPHA #0: Wed Nov 13 15:29:19 1996 jkh@time.cdrom.com:/usr/src/sys/compile/GENERIC Calibrating clock(s) relative to mc146818A clock ... i8254 clock: 1193187 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency CPU: i486DX (486-class CPU) real memory = 67108864 (65536K bytes) avail memory = 62664704 (61196K bytes) BIOS Geometries: 0:0107fe3f 0..263=264 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x8000005c pcibus_setup(1a): mode1res=0x80000000 (0x80000000) pcibus_check: device 0 is there (id=70308086) Probing for devices on PCI bus 0: configuration mode 1 allows 32 devices. chip0 rev 2 on pci0:0 chip1 rev 1 on pci0:7:0 chip2 rev 0 on pci0:7:1 mapreg[20] type=1 addr=0000e800 size=0010. vga0 rev 3 on pci0:11 mapreg[10] type=0 addr=fa000000 size=1000000. ahc0 rev 1 int a irq 9 on pci0:12 mapreg[10] type=1 addr=0000e000 size=0100. mapreg[14] type=0 addr=f9fff000 size=1000. reg16: ioaddr=0xe000 size=0x100 ahc0: Reading SEEPROM...done. ahc0: aic7860 Single Channel, SCSI Id=7, 3 SCBs ahc0: Downloading Sequencer Program...Done ahc0: Probing channel A ahc0 waiting for scsi devices to settle ahc0: target 0 synchronous at 10.0MHz, offset = 0xf (ahc0:0:0): "FUJITSU M2915S-512 0127" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 2075MB (4250695 512 byte sectors) sd0(ahc0:0:0): with 3011 cyls, 15 heads, and an average 94 sectors/track ahc0:A:4: refuses syncronous negotiation. Using asyncronous transfers (ahc0:4:0): "NEC CD-ROM DRIVE:210 1.0" type 5 removable SCSI 1 cd0(ahc0:4:0): CD-ROM cd present [192775 x 2048 byte records] pci0: uses 16781312 bytes of memory from f9fff000 upto faffffff. pci0: uses 272 bytes of I/O space from e000 upto e80f. Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 ed1 not found at 0x300 fe0 not found at 0x300 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2: disabled, not probed. sio3: disabled, not probed. lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface lpt1 at 0x378-0x37f on isa lpt1 not probed due to I/O address conflict with lpt0 at 0x378 mse0: wrong signature ff mse0 not found at 0x23c psm0 at 0x60-0x63 irq 12 on motherboard fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in fd1: 1.2MB 5.25in wdc0 not found at 0x1f0 wdc1 not found at 0x170 bt0 not found at 0x330 uha0 not found at 0x330 aha0 not found at 0x330 aic0 not found at 0x340 nca0 not found at 0x1f88 nca1 not found at 0x350 sea0 not found wt0 not found at 0x300 mcd0: timeout getting status mcd0 not found at 0x300 matcdc0 not found at 0x230 scd0 not found at 0x230 ie0 not found at 0x360 1 3C5x9 board(s) on ISA found at 0x300 ep0 at 0x300-0x30f irq 10 on isa ep0: aui/utp/bnc[*UTP*] address 00:a0:24:89:71:42 ix0 not probed due to I/O address conflict with ep0 at 0x300 le0 not probed due to I/O address conflict with ep0 at 0x300 lnc0 not found at 0x280 ze0 not probed due to I/O address conflict with ep0 at 0x300 zp0 not probed due to I/O address conflict with ep0 at 0x300 npx0 on motherboard npx0: INT 16 interface apm0: disabled, not probed. imasks: bio c0000240, tty c003149a, net c003149a Device configuration finished. Considering FFS root f/s. changing root device to sd0a configure() finished. sd0s1: type 0xa5, start 63, end = 2184839, size 2184777 : OK sd0s2: type 0x6, start 2184840, end = 4241159, size 2056320 : OK -- Yun-Ching (Allen) Lee # "There is no such thing as a good influence... ycl+@cmu.edu # All influence is immoral." yunching+@andrew.cmu.edu # -- Lord Henry Wotton