Date: Mon, 10 Nov 2003 11:33:53 +0300 From: Sergey Kulikov <flux@hotbox.ru> To: fbsd_user <fbsd_user@a1poweruser.com>, freebsd-questions@freebsd.org Subject: Re[2]: Can't make the system see my modem! Please help!!! Message-ID: <1433549664.20031110113353@hotbox.ru> In-Reply-To: <MIEPLLIBMLEEABPDBIEGCEBLEMAA.fbsd_user@a1poweruser.com> References: <1872516063.20031107201004@hotbox.ru> <MIEPLLIBMLEEABPDBIEGCEBLEMAA.fbsd_user@a1poweruser.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Thank you. f> Thanks so much for the help in getting my V.Everything Internal f> Modem working! f> I wanted to document the steps that I took so that in the future if f> Anyone else has this problem, hopefully this can point them in the f> right f> direction. f> To start with, I used the 'pnpinfo' command, and f> this got my hopes up that it was possible to get this modem working f> eventually. The output of pnpinfo was as follows: f> Checking for Plug-n-Play devices... f> Card assigned CSN #1 f> Vendor ID USR0101 (0x01017256), Serial Number 0xacb0bb15 f> PnP Version 1.0, Vendor Version 0 f> Device Description: USRobotics Courier V.Everything f> Logical Device ID: USR0009 0x09007256 #0 f> TAG Start DF f> Good Configuration f> FIXED I/O base address 0x2f8 length 0x8 f> IRQ: 3 4 5 7 9 - only one type (true/edge) f> TAG Start DF f> Acceptable Configuration f> FIXED I/O base address 0x3f8 length 0x8 f> IRQ: 3 4 5 7 9 - only one type (true/edge) f> TAG Start DF f> Acceptable Configuration f> FIXED I/O base address 0x3e8 length 0x8 f> IRQ: 3 4 5 7 9 - only one type (true/edge) f> TAG Start DF f> Acceptable Configuration f> FIXED I/O base address 0x2e8 length 0x8 f> IRQ: 3 4 5 7 9 - only one type (true/edge) f> TAG End DF f> End Tag f> Successfully got 16 resources, 1 logical fdevs f> -- card select # 0x0001 f> CSN USR0101 (0x01017256), Serial Number 0xacb0bb15 f> Logical device #0 f> IO: 0x03e8 0x03e8 0x03e8 0x03e8 0x03e8 0x03e8 0x03e8 0x03e8 f> IRQ 5 0 f> DMA 4 4 f> IO range check 0x00 activate 0x01 f> The part that is interesting to us is this: f> Card assigned CSN #1 f> Vendor ID USR0101 (0x01017256), Serial Number 0xacb0bb15 f> PnP Version 1.0, Vendor Version 0 f> Device Description: USRobotics Courier V.Everything f> Logical Device ID: USR0009 0x09007256 #0 f> According to the documentation in the file: f> /usr/share/doc/en/books/faq/book.txt f> we need to add the part after the USR0101, (which is 0x01017256), to f> the f> file /usr/src/sys/isa/sio.c, recompile our kernel, and voila, it f> should be f> found. f> However, this didn't work for me right away. I played around with f> it, and f> found that it was the number on the line labeled 'Logical Device ID' f> that I f> needed to add to the sio.c file. f> After trying that, I recompiled the kernel and it worked like a f> charm. f> -----Original Message----- f> From: owner-freebsd-questions@freebsd.org f> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Сергей f> Куликов f> Sent: Friday, November 07, 2003 12:10 PM f> To: freebsd-questions@freebsd.org f> Subject: Can't make the system see my modem! Please help!!! f> I have ELINE 576-PS (PCTel PCT789T-A Chipset) internal modem device f> and need to f> set it up under FreeBSD 4.7 box. GENERIC kernel says when booting: f> pci0: <unknown card> (vendor=0x134d, dev=0x7897) at 11.0 irq 9 f> As you see my modem is unknown for GENERIC kernel. I saw f> /boot/defaults/loader.conf and found no line corresponding to that f> particular modem at all. What should I do to make the system see the f> device and interact with one. f> Any help would be apreciated. f> -- f> Best regards, f> Сергей mailto:flux@hotbox.ru f> _______________________________________________ f> freebsd-questions@freebsd.org mailing list f> http://lists.freebsd.org/mailman/listinfo/freebsd-questions f> To unsubscribe, send any mail to f> "freebsd-questions-unsubscribe@freebsd.org" -- Best regards, Sergey mailto:flux@hotbox.ru
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1433549664.20031110113353>