Date: Fri, 14 Apr 2000 19:50:27 -0500 From: "Ben Vaughn" <bvaughn@pns.net> To: <freebsd-smp@freebsd.org> Subject: Issues with Spankin' new Poweredge 4400 w/ dual 866's and 133MHz FSB? Message-ID: <NDBBLJLIKLNKLNOLEJIKCEKMCDAA.bvaughn@pns.net>
next in thread | raw e-mail | index | archive | help
Hello,
Just got 4.0-STABLE onto this new server of ours, and i'm having serious
problems getting SMP to work. If I enable SMP, I have to use the following
kernel settings:
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options NCPU=2 # number of CPUs
#options NBUS=14 # number of busses
#options NAPIC=4 # number of IO APICs
#options NINTR=47 # number of INTs
Without the comments, of course. When I boot, I get past the initial screen,
but the boot process stops right after sio1 initializes. Enabling DDB, and
trying to CTRL-ALT-ESCAPE won't allow me to, so I suppose the whole thing
just dies hard-core when it gets there. Below is a copy of my mptable and
dmesg. If you need anything else, please tell me. I was hoping to bring this
server live by April 21, so I hope someone can help. :-)
Regards,
Ben Vaughn
Prophet Network Systems
============================================================================
===
MPTable, version 2.0.15
----------------------------------------------------------------------------
---
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000fe710
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x91
mode: Virtual Wire
----------------------------------------------------------------------------
---
MP Config Table Header:
physical address: 0x000f0000
signature: 'PCMP'
base table length: 604
version: 1.4
checksum: 0x57
OEM ID: 'DELL '
Product ID: 'POWEREDGE 9A'
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 67
local APIC address: 0xfee00000
extended table length: 208
extended table checksum: 195
----------------------------------------------------------------------------
---
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step
Flags
1 0x11 BSP, usable 6 8 3
0x383fbff
0 0x11 AP, usable 6 8 3
0x383fbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 PCI
3 PCI
4 PCI
5 PCI
6 PCI
7 PCI
8 PCI
9 PCI
10 PCI
11 PCI
12 PCI
13 ISA
--
I/O APICs: APIC ID Version State Address
2 0x11 usable 0xfec00000
3 0x11 usable 0xfec01000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 13 0 2 0
INT conforms conforms 13 1 2 1
INT conforms conforms 13 0 2 2
INT conforms conforms 13 3 2 3
INT conforms conforms 13 4 2 4
INT conforms conforms 13 6 2 6
INT conforms conforms 13 7 2 7
INT conforms conforms 13 8 2 8
INT conforms conforms 13 9 2 9
INT conforms conforms 13 11 2 11
INT conforms conforms 13 12 2 12
INT conforms conforms 13 15 2 15
INT conforms conforms 0 4:A 3 0
INT conforms conforms 7 6:A 3 9
INT conforms conforms 7 4:A 3 15
INT conforms conforms 7 4:B 3 8
INT conforms conforms 0 8:A 3 1
INT conforms conforms 0 8:C 3 1
INT conforms conforms 8 10:A 3 2
INT conforms conforms 8 10:C 3 2
INT conforms conforms 8 8:A 3 3
INT conforms conforms 8 8:C 3 3
INT conforms conforms 8 6:A 3 4
INT conforms conforms 8 6:C 3 4
INT conforms conforms 8 4:A 3 5
INT conforms conforms 8 4:C 3 5
INT conforms conforms 1 8:A 3 6
INT conforms conforms 1 8:C 3 6
INT conforms conforms 1 4:A 3 7
INT conforms conforms 1 4:C 3 7
INT conforms conforms 0 8:B 3 8
INT conforms conforms 0 8:D 3 8
INT conforms conforms 6 4:B 3 8
INT conforms conforms 8 10:B 3 9
INT conforms conforms 8 10:D 3 9
INT conforms conforms 6 4:C 3 9
INT conforms conforms 8 8:B 3 10
INT conforms conforms 8 8:D 3 10
INT conforms conforms 8 6:B 3 11
INT conforms conforms 8 6:D 3 11
INT conforms conforms 8 4:B 3 12
INT conforms conforms 8 4:D 3 12
INT conforms conforms 1 8:B 3 13
INT conforms conforms 1 8:D 3 13
INT conforms conforms 1 4:B 3 14
INT conforms conforms 1 4:D 3 14
INT conforms conforms 6 4:A 3 15
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 13 0 255 0
NMI active-hi edge 13 0 255 1
----------------------------------------------------------------------------
---
MP Config Extended Table Entries:
--
bus ID: 0 address type: I/O address
address base: 0xf000
address range: 0x1000
--
bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x20000
--
bus ID: 0 address type: memory address
address base: 0xfd000000
address range: 0x1b10000
--
bus ID: 1 address type: I/O address
address base: 0xd000
address range: 0x2000
--
bus ID: 1 address type: memory address
address base: 0xfbf00000
address range: 0x1100000
--
bus ID: 6 address type: I/O address
address base: 0xc000
address range: 0x1000
--
bus ID: 6 address type: memory address
address base: 0xfa000000
address range: 0x1f00000
--
bus ID: 8 address type: I/O address
address base: 0xa000
address range: 0x2000
--
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0xa000
--
bus ID: 8 address type: memory address
address base: 0xf8f00000
address range: 0x1100000
--
bus ID: 13 bus info: 0x01 parent bus ID: 0
----------------------------------------------------------------------------
---
# SMP kernel config file options:
# Required:
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
# Optional (built-in defaults will work in most cases):
#options NCPU=2 # number of CPUs
#options NBUS=14 # number of busses
#options NAPIC=2 # number of IO APICs
#options NINTR=47 # number of INTs
============================================================================
===
And, My DMESG:
root@blerf:/usr/src# dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-STABLE #0: Fri Apr 14 13:39:26 EST 2000
root@blerf.pns.net:/usr/obj/usr/src/sys/PNS-SMP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon (863.93-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 2147475456 (2097144K bytes)
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di le0
No such device: le0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 2086125568 (2037232K bytes)
Preloaded elf kernel "kernel" at 0xc0303000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc030309c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <RCC LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xfcc0-0xfcff mem
0xfe900000-0xfe9fffff,0xfeb02000-0xfeb02fff irq 14 at device 4.0 on pci0
fxp0: Ethernet address 00:b0:d0:20:a7:06
pci0: <ATI model 4759 graphics accelerator> at 6.0
isab0: <PCI to ISA bridge (vendor=1166 device=0200)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
pci0: <OHCI USB controller> at 15.2 irq 11
pcib1: <RCC LE host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
pcib6: <RCC LE host to PCI bridge> on motherboard
pci6: <PCI bus> on pcib6
pcib9: <PCI to PCI bridge (vendor=8086 device=0962)> at device 4.0 on pci6
pci7: <PCI bus> on pcib9
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xcc00-0xccff mem
0xfbdff000-0xfbdfffff irq 10 at device 4.0 on pci7
ahc0: aic7899 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xc800-0xc8ff mem
0xfbdfe000-0xfbdfefff irq 5 at device 4.1 on pci7
ahc1: aic7899 Wide Channel B, SCSI Id=7, 16/255 SCBs
ahc2: <Adaptec aic7880 Ultra SCSI adapter> port 0xc400-0xc4ff mem
0xfbdfd000-0xfbdfdfff irq 14 at device 6.0 on pci7
ahc2: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
pcib8: <RCC LE host to PCI bridge> on motherboard
pci8: <PCI bus> on pcib8
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
IP packet filtering initialized, divert disabled, rule-based forwarding
disabled, default to accept, logging limited to 100 packets/entry by default
DUMMYNET initialized (000106)
Waiting 15 seconds for SCSI devices to settle
pass2 at ahc0 bus 0 target 6 lun 0
pass2: <DELL 1x6 U2W SCSI BP 5.35> Fixed Processor SCSI-2 device
pass2: 3.300MB/s transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS 10K 9SCA UCHD> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da0: 8683MB (17783249 512 byte sectors: 255H 63S/T 1106C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM ATLAS 10K 9SCA UCHD> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da1: 8683MB (17783249 512 byte sectors: 255H 63S/T 1106C)
vinum: loaded
Mounting root from ufs:/dev/da0s1a
cd0 at ahc2 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:466 1.06> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?NDBBLJLIKLNKLNOLEJIKCEKMCDAA.bvaughn>