Date: Sun, 19 Dec 1999 19:00:26 +0100 From: Thierry Herbelot <herbelot@cybercable.fr> To: djb@relativity.student.utwente.nl Cc: freebsd-current@freebsd.org Subject: Re: Success with ATA drivers and UDMA66 Message-ID: <385D1D3A.1CD83156@cybercable.fr> References: <19991218021726.A931@relativity.student.utwente.nl> <385B2944.6ABE249E@cybercable.fr> <19991218125101.A367@relativity.student.utwente.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
"Dave J. Boers" wrote: > > On Sat, Dec 18, 1999 at 07:27:16AM +0100, Thierry Herbelot wrote: > > Do you boot from the UDMA66 drive ? > > Yes. Bios boot sequence is EXT,C,A; where EXT is set to UDMA66, not SCSI. > The SCSI disk is a 4.3 Gb WD Enterprise on an Adaptec 2940AU board. > > > What is your BIOS revision ? > > Award Bios v. 4.51PG > Revision line (bottom of screen) sais: > 06/08/1999-i440BX-W83977-2A69KA1SC-LP > Highpoint Bios: HPT 366 v. 1.07 well, here is just gone to the NJ rev, hopefully for the better .. > > > How many SDRAM DIMMs do you use ? > > Currently there is one 128 Mb DIMM in the first slot. In a few weeks I will > add a 256 Mb DIMM in the second slot, if I can get my hands on one (memory > prices are going down again). > > > What is the rating of your Power supply ? > > Not quite high enough :-( > It's a 300 Watt power supply. > > > Do you use an AGP graphics board ? > > Yes. It's a diamond Viper 550 with 8 Mb RAM. > > > (I also have a BP6 and I'm mildly satisfied by its stability up to now, > > I'm looking for ways to upgrade it and hints to increase the > > reliability) > > I haven't got any complaints about the BP6, actually. It runs quite nicely > here. Exactly what are your complaints about it (i.e. why do you say > "mildly" instead of "wildly")? > Well, combination of bad luck and bad memory DIMM : but I'm in the process of a full in-RAM buildworld, and it seems to be ok. TfH > Regards, > > Dave Boers. > > -- > God, root, what's the difference? > djb@relativity.student.utwente.nl To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?385D1D3A.1CD83156>