Date: Fri, 1 May 2015 00:15:59 -0300 From: Luiz Otavio O Souza <lists.br@gmail.com> To: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org>, Andreas Schwarz <Andreas.Schwarz@schwarzes.net> Subject: Re: FreeBSD 10.1 / 11 on a Raspberry Pi B+ / 2 ? Message-ID: <CAB=2f8yBiX73xt5cnAsVuNDTgQtWa5o2JoX8382CLgTxU0Y=1A@mail.gmail.com> In-Reply-To: <46369db827.17451cd@mail.schwarzes.net> References: <b512debfc49e6e68ac725d0b03570f84.squirrel@ikornapostur.1984.is> <CAFDgZgVcCrTk_Di%2BOeC=28CYh8YCmDmzmXchHDWfJRYOT=Kh2A@mail.gmail.com> <6ff566ec17fc2b0d61635d8886261d5a.squirrel@ikornapostur.1984.is> <CA%2BD9QhtjmLTrgb_YXQ5EwjYJPY82Tf58f5uajR3VE8GPAEOboA@mail.gmail.com> <028290c7462d8fcf63b07bfdbbd08897.squirrel@ikornapostur.1984.is> <CA%2BD9QhtiiVUQuvFJxLZmg3=94HkruwYJ6LkGP5cOn%2BOZgHMoLg@mail.gmail.com> <CA%2BD9QhvZJBoStvX6Sx-=XjfcqAKuJ0Y6_ixwBaQvfbrvtbi_EQ@mail.gmail.com> <04594F43-C6FD-4798-ACFF-8BB7179A905F@bsdimp.com> <BAY182-W54AD6CD23741D63E45FBEA2040@phx.gbl> <CA%2BD9QhtEhKBJyuUVg7arG7tqSAbJ1g--4Rj2Trpp43-1mvUBLA@mail.gmail.com> <BAY182-W762BE2999779F14F7FD736A2040@phx.gbl> <CA%2BD9QhuLXOBJn8ZiN%2B894rgQLVXvNWVZ2Xqq75Yjtz8s-KwvGg@mail.gmail.com> <5FD36BF9-2FAD-40ED-AE67-D8B1E3274CB1@gromit.dlib.vt.edu> <552FCD90.20401@foxvalley.net> <462bae1cb99.7f9417c1@mail.schwarzes.net> <CAB=2f8yW-SM48DGpDn9uuwBawUzCqtUCVT8oeZ%2Bh_6-pVrjdTw@mail.gmail.com> <46369db827.17451cd@mail.schwarzes.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 30 April 2015 at 20:54, Andreas Schwarz wrote: > On 22.04.15, Luiz Otavio O Souza wrote: > > Hi all, > >> Yes, that is right, we need a different u-boot for it. >> >> I'm working on the new u-boot, it's working already, its a matter of >> tidy up the port and get everything in its place. > > New u-boot is there, but unfortunately I'm not successful yet. First, I've tried > to upgrade my installation, building u-boot-rpi2 and the Kernel with RPI2 kernelconf > (added the ARM_NEW_PMAP option). The new u-boot-rpi2 and ubldr seem to work and the > kernel is loaded, but when the kernel should start/boot, the RPI2 shuts down suddenly, > all LED are off, nothing. > > To keep sure that I don't make a mistake, I've build (independently from my installation) > a completly new image, described in the Wiki (link below). But I run in the exacly same > problem. > > https://wiki.freebsd.org/FreeBSD/arm/Raspberry%20Pi%202%20image > > > Here is my rpi2 image, build by following the wiki instructions (it's not working for > me). For security reasons I've removed my ssh pubkey from /root/.ssh/. > > http://dl.strcmp.org/rpi2-b-r282267.img.xz > > Maybe someone can check and confirm or deny the behavior. > > -Andreas Hi Andreas, If you are using the HDMI output this is expected, the framebuffer is broken on RPi 2. It is because of the newer firmware version. I'm working on a fix, but vt seems.. different.. I hope to sort this out and commit the fix ASAP. You can also use Crochet to build RPi 2 images (probably simpler). I'll send an heads up when it is ready for test. Regads, Luiz
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAB=2f8yBiX73xt5cnAsVuNDTgQtWa5o2JoX8382CLgTxU0Y=1A>