Date: Mon, 07 Dec 2009 09:52:54 +0000 From: Michael Fuckner <michael@fuckner.net> To: freebsd-amd64@FreeBSD.org, freebsd-amd64@mlists.thewrittenword.com Subject: Re: Success with Supermicro H8DIi+-F motherboard? Message-ID: <4B1CD076.9020801@fuckner.net> In-Reply-To: <4B1A24E6.8040608@fuckner.net> References: <20091204183122.GA20479@honinbu.il.thewrittenword.com> <4B1A24E6.8040608@fuckner.net>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------060400030503060803010704 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Michael Fuckner wrote: > Albert Chin wrote: >> Anyone running 7.2/8.0 (7.2 preferable) on this motherboard with any >> success? It's using the AMD SR5690 + SP5100 Chipset. > The SATA-Controller is 1002:4391 (set to AHCI-Mode). This ID was > introduced in 1.1.2.10 of ahci.c > (http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/ahci/ahci.c) > > I am not exactly sure if this Version is on the 8.0-RELEASE-CD, but I'll > boot this CD on Monday. I had an 8.0-RC1 here and it boots- see dmesg. I'll try 7.2 in the afternoon. Regards, Michael! --------------060400030503060803010704 Content-Type: text/plain; name="dmesg-h8dii-8.0-rc1.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg-h8dii-8.0-rc1.txt" Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-RC1 #0: Thu Sep 17 18:50:57 UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Quad-Core AMD Opteron(tm) Processor 2378 (2400.02-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x100f42 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802009<SSE3,MON,CX16,POPCNT> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> TSC: P-state invariant real memory = 17179869184 (16384 MB) avail memory = 16562884608 (15795 MB) ACPI APIC Table: <112609 APIC0945> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 2 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <SMCI > on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of fee00000, 1000 (3) failed acpi0: reservation of ffb80000, 80000 (3) failed acpi0: reservation of fec10000, 20 (3) failed acpi0: reservation of 100000, dff00000 (3) failed acpi0: reservation of 0, a0000 (3) failed ACPI HPET table warning: Sequence is non-zero (2) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.1 on pci1 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0 pci4: <ACPI PCI bus> on pcib4 em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xd800-0xd81f mem 0xfdee0000-0xfdefffff,0xfdedc000-0xfdedffff irq 17 at device 0.0 on pci4 em0: Using MSIX interrupts em0: [ITHREAD] em0: [ITHREAD] em0: [ITHREAD] em0: Ethernet address: 00:30:48:bc:83:46 pcib5: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0 pci5: <ACPI PCI bus> on pcib5 em1: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xe800-0xe81f mem 0xfdfe0000-0xfdffffff,0xfdfdc000-0xfdfdffff irq 18 at device 0.0 on pci5 em1: Using MSIX interrupts em1: [ITHREAD] em1: [ITHREAD] em1: [ITHREAD] em1: Ethernet address: 00:30:48:bc:83:47 ahci0: <AHCI controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfddff800-0xfddffbff irq 22 at device 17.0 on pci0 ahci0: [ITHREAD] ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich0: [ITHREAD] ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich1: [ITHREAD] ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich2: [ITHREAD] ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich3: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xfddfe000-0xfddfefff irq 16 at device 18.0 on pci0 ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 ohci1: <OHCI (generic) USB controller> mem 0xfddfd000-0xfddfdfff irq 16 at device 18.1 on pci0 ohci1: [ITHREAD] usbus1: <OHCI (generic) USB controller> on ohci1 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfddff000-0xfddff0ff irq 17 at device 18.2 on pci0 ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: <EHCI (generic) USB 2.0 controller> on ehci0 ohci2: <OHCI (generic) USB controller> mem 0xfddfc000-0xfddfcfff irq 18 at device 19.0 on pci0 ohci2: [ITHREAD] usbus3: <OHCI (generic) USB controller> on ohci2 ohci3: <OHCI (generic) USB controller> mem 0xfddf7000-0xfddf7fff irq 18 at device 19.1 on pci0 ohci3: [ITHREAD] usbus4: <OHCI (generic) USB controller> on ohci3 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfddf6800-0xfddf68ff irq 19 at device 19.2 on pci0 ehci1: [ITHREAD] usbus5: EHCI version 1.0 usbus5: <EHCI (generic) USB 2.0 controller> on ehci1 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci6: <ACPI PCI bus> on pcib6 vgapci0: <VGA-compatible display> mem 0xfc000000-0xfcffffff,0xfebfc000-0xfebfffff,0xfe000000-0xfe7fffff irq 20 at device 4.0 on pci6 ohci4: <OHCI (generic) USB controller> mem 0xfddf5000-0xfddf5fff irq 18 at device 20.5 on pci0 ohci4: [ITHREAD] usbus6: <OHCI (generic) USB controller> on ohci4 acpi_button0: <Power Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: [FILTER] ACPI Warning: \\_SB_.PCI0.SBRG.FDC_._FDE: Return type mismatch - found Package, expected Buffer 20090521 nspredef-1051 fdc1: <floppy drive controller (FDE)> port 0-0x5,0x7 drq 2 on acpi0 fdc1: cannot reserve interrupt line device_attach: fdc1 attach returned 6 uart2: <16550 or compatible> port 0x3e8-0x3ef irq 5 on acpi0 uart2: [FILTER] cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 fdc1: <floppy drive controller (FDE)> port 0-0x5,0x7 drq 2 on acpi0 fdc1: cannot reserve interrupt line device_attach: fdc1 attach returned 6 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 usbus6: 12Mbps Full Speed USB v1.0 acd0: DMA limited to UDMA33, device found non-ATA66 cable ugen0.1: <ATI> at usbus0 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <ATI> at usbus1 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <ATI> at usbus2 uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <ATI> at usbus3 uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <ATI> at usbus4 uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <ATI> at usbus5 uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ugen6.1: <ATI> at usbus6 uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 acd0: DVDR <HL-DT-ST DVDRAM GH22NS50/TN01> at ata0-slave UDMA33 uhub6: 2 ports with 2 removable, self powered uhub0: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered uhub3: 3 ports with 3 removable, self powered uhub4: 3 ports with 3 removable, self powered uhub2: 6 ports with 6 removable, self powered uhub5: 6 ports with 6 removable, self powered (aprobe0:ahcich0:0:15:0): SIGNATURE: 0000 (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000 (aprobe1:ahcich1:0:15:0): SIGNATURE: 0000 (aprobe0:ahcich1:0:0:0): SIGNATURE: 0000 ada0 at ahcich0 bus 0 target 0 lun 0 ada0: <ST3500320NS SN06> ATA/ATAPI-8 SATA 1.x device ada0: 150.000MB/s transfers ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada0: Native Command Queueing enabled ada1 at ahcich1 bus 0 target 0 lun 0 ada1: <ST3500320NS SN06> ATA/ATAPI-8 SATA 1.x device ada1: 150.000MB/s transfers ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada1: Native Command Queueing enabled SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #7 Launched! GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s). Trying to mount root from ufs:/dev/ada0s1a em0: link state changed to UP --------------060400030503060803010704--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4B1CD076.9020801>