Date: Sun, 30 Jul 2000 19:48:31 +0200 From: DEAMmac <mac@deam.org> To: isdn <freebsd-isdn@freebsd.org> Subject: more "howto fritz and ppp" Message-ID: <B5AA370E.3786%mac@deam.org>
next in thread | raw e-mail | index | archive | help
hi there again, first: thank you miklos for the mails. i think the "normal" ppp could go faster to a success. in general: i am really new to ppp, because i got my router an a adsl without any big configuration problems ;-) so far: i attached my isdn-card, witch _is_ a isa one, to the system with this message at boot-time: isic0 at port 0x1b00-0x1b1f,0x16e0-0x16ff,0x6e0-0x6ff,0xee0-0xeff,0x1300-0x131f,0x300-0x31 f,0xb00-0xb1f irq 11 flags 0x4 on isa0 isic0: AVM A1 or Fritz!Card Classic 2. i changed the isdnd.rc from the /usr/share/examples/ppp and put it in /etc/isdn 3. i changed the ppp.conf from the /usr/share/examples/ppp and put it in /etc/ppp now i got the problem with this ppp-stuff: at boottime i got many warnings like "Waring: set phone: No context (use the 'link' command). in my /var/log/ppp.log there is always this, if i try to dial: Jul 30 21:33:50 lolita ppp[96]: Phase: 1: hangup -> opening Jul 30 21:33:50 lolita ppp[96]: Phase: 1: Enter pause (3) for redialing. Jul 30 21:33:53 lolita ppp[96]: Phase: 1: Connected! Jul 30 21:33:53 lolita ppp[96]: Phase: 1: opening -> dial Jul 30 21:33:53 lolita ppp[96]: Phase: 1: dial -> carrier Jul 30 21:33:59 lolita ppp[96]: Phase: 1: /dev/i4brbch0: No carrier (increase ``set cd'' from 6 ?) Jul 30 21:33:59 lolita ppp[96]: Phase: 1: Disconnected! Jul 30 21:33:59 lolita ppp[96]: Phase: 1: carrier -> hangup Jul 30 21:33:59 lolita ppp[96]: Phase: 1: Connect time: 6 secs: 0 octets in, 0 octets out Jul 30 21:33:59 lolita ppp[96]: Phase: total 0 bytes/sec, peak 0 bytes/sec on Sun Jul 30 21:33:59 2000 the isdntrace0 puts out some cryptic-stuff i don't understand.... in the kernel-config i activated pseudo-device ppp pseudo-device "i4bq921" pseudo-device "i4bq931" pseudo-device "i4b" pseudo-device "i4btrc" 4 pseudo-device "i4bctl" pseudo-device "i4brbch" 4 and the card itself :) it maybe help if i put the configs in here: ---------------------------- start ppp.conf default: # Replace this with your ISPs phone number set phone 123456789 # Replace these with your login name & password. This profile assumes # you're using PAP or CHAP. set authname somename@okay.net set authkey password # Assuming you have a LAN: set enddisc mac enable lqr set reconnect 3 5 set redial 3 10 set lqrperiod 45 disable pred1 deflate deny pred1 deflate # Our minimum charge period is 5 minutes, so don't hangup before then set timeout 60 300 # We have no chat scripts in the ISDN world (yet) set dial set login set hangup # Use the raw B-channel devices # set device /dev/i4brbch0 /dev/i4brbch1 set device /dev/i4brbch0 set speed sync set bandwidth 65536 # How long does it take to connect with ISDN ? link * set cd 6 # Ask the peer what to put in resolv.conf enable dns # Take a wild guess and let the other side decide set ifaddr 172.16.0.1/0 212.0.0.0/0 add! default hisaddr # Multilink mode please set mrru 1500 # Two new links clone 1,2 # And get rid of the old one with the crusty name link deflink rm # Automatically manage the second link link * set mode auto set autoload 10 100 30 # Otherwise, do things via the diagnostic port set server /tmp/pavilion "" 0177 ---------------------------- end ppp.conf ---------------------------- start isdnd.rc #=========================================================================== === # SYSTEM section: isdnd global configuration parameters #=========================================================================== === system # accounting # ---------- acctall = on # generate info for everything acctfile = /etc/isdn/isdnd.acct # name & location of accounting file useacctfile = yes # generate accouting info to file isdntime = on monitor-allowed = no # global switch: monitor on/off #================================================================= # User-ppp example #================================================================= entry name = userppp0 usrdevicename = rbch usrdeviceunit = 0 isdncontroller = 0 isdnchannel = -1 local-phone-incoming = * remote-phone-incoming = * local-phone-dialout = 123456789 remote-phone-dialout = 1234567 # ppp(8) will override this remdial-handling = first dialin-reaction = ignore dialout-type = normal b1protocol = hdlc idletime-incoming = 900 # Should be larger than ppps timeout idletime-outgoing = 900 # Should be larger than ppps timeout ratetype = 0 unitlength = 90 unitlengthsrc = rate dialretries = 3 dialrandincr = on recoverytime = 1 # Should be smaller than ppps redial usedown = off downtries = 2 downtime = 30 ---------------------------- end isdnd.rc ---------------------------- start rc.conf ifconfig_ed0="inet 10.10.10.100 netmask 255.255.255.0" hostname="lolita.deam.org" saver="star" font8x8="iso-8x8" font8x14="iso-8x14" font8x16="iso-8x16" scrnmap="iso-8859-1_to_cp437" keyrate="fast" keymap="german.iso" pccard_ifconfig="NO" pccard_mem="DEFAULT" sshd_enable="YES" isdn_enable="YES" isdn_trace="YES" ppp_enable="YES" ppp_profile="default" ---------------------------- end rc.conf sorry, but i am really new to ppp and i don't know where to start. thanks in advance klaus - DaMac@irc: #team23.org PGP-ID#: 0x6F28F58E PGP-Type: DH/DSS | 2048/1024 -------------------------------------> http://mac.deam.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B5AA370E.3786%mac>