Date: Thu, 16 Nov 1995 10:16:01 +0900 From: HyunSeog Ryu <moonhunt@easy.RE.KR> To: freebsd-hackers@freebsd.org Subject: Installation problem Message-ID: <199511160116.KAA00685@ns.easy.re.kr>
next in thread | raw e-mail | index | archive | help
Hi, everyone, When I was installed FreeBSD 2.1.0-951104-SNAP to my system, I got error message with boot.flp. My machine information : CPU : 486-DX4/100 RAM : 64M HDD : SEAGATE ST32430N (SCSI ID 0) SEAGATE ST15230N (SCSI ID 1) AHA1542CF LAN : 3COM 3C509 Combo I know, SEAGATE HDD's geometry infomation is below. Cyl Head Sector RPM Capacity ST32430N 2605 19 82 5411 2.14GB ST15230N 3974 19 111 5411 4.294GB But boot.flp's Partition menu reports different geometry information. So I put correct geometry information by "g" command. And I do installation procedure by commit. It has reported warning message as below. Warning! Unable to swap to /dev/sd0s1b: Device not cpnfigured This may cause the installation to fail at some point if you don't have a lot of memory. And procedure go on, it report error message as below. Unable to make new root filesystem on /dev/rsd0a! Command returned status 1 Boot.flp detect sd0 and sd1 correctly when it is begin(Alt-F2 debugging screen). I was labeled all partition as below. / : 128M swap : 128M /var : 64M /usr : 512M /news : 1 GB /home : 128M /home/ftp : 4 GB Why this situation occurs??? When I just follow as boot.flp's reported geometry, it's result is same... I got boot.flp from ftp://ftp.waseda.ac.jp/pub/FreeBSD/2.1.0-951104-SNAP/floppies/boot.flp. Is this hardware problem or boot.flp's problem??? ;< Please help me this situation... ;< Thank you for your reading... -- Name : Hyunseog Ryu(moonhunt@easy.re.kr) http://www.easy.re.kr/~moonhunt Tel : +82-2-884-0174 Fax : +82-2-884-0175 EASY Research Institute, 304-25,Shinrim 10-dong Kwanak-gu,Seoul,151-020,Korea For the better tommorow, for the better world!!! Cheers~~~~ ;>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199511160116.KAA00685>