Date: Tue, 20 Apr 2004 14:38:49 +0200 From: Christoph Rosport <crosport@rosleuchter.de> To: Marco van de Voort <marcov@stack.nl> Cc: freebsd-mobile@freebsd.org Subject: Re: unsupported io range problem Message-ID: <408519D9.3040009@rosleuchter.de> In-Reply-To: <20040420103932.9551E83@toad.stack.nl> References: <20040420103932.9551E83@toad.stack.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
Marco van de Voort wrote: > I've installed FreeBSD 5.2.1 on a Latitude Cpi. > > The Cpi has a C/dock dockingstation that works fine under 4.9. > Contents: a 3c905 integrated, a 3c900 in the free PCI slot, and some adaptec SCSI controller. > There is also a Latitude modular bay which is an IDE device. > > For all the docking station devices I get errors like: > pcib1: device xl0 requested unsupported I/O range 0xfcc0-0xfcff (decoding 0x0-0xfff) > > The normal laptop devices seem to go ok. (the realtek is a 32-bits cardbus card, so in the laptop, > not the docking) > > Some googling made me find the a hw.pci.unsupported...="1" key that I added to loader.conf, to no > avail. > > Anybody any hints > > Dmesg: > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 > root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC > Preloaded elf kernel "/boot/kernel/kernel" at 0xc09e3000. > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Pentium II/Pentium II Xeon/Celeron (233.86-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x652 Stepping = 2 > Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> > real memory = 134152192 (127 MB) > avail memory = 120692736 (115 MB) > Pentium Pro MTRR support enabled > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcibios: BIOS version 2.10 > Using $PIR table, 5 entries at 0xc00fb940 > pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on motherboard > pci0: <PCI bus> on pcib0 > pci_cfgintr: 0:2 INTA BIOS irq 11 > pci_cfgintr: 0:3 INTA BIOS irq 11 > pci_cfgintr: 0:3 INTB BIOS irq 11 > pci_cfgintr: 0:7 INTD BIOS irq 11 > pci0: <display, VGA> at device 2.0 (no driver attached) > cbb0: <TI1131 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > cbb0: [MPSAFE] > cbb1: <TI1131 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0 > cardbus1: <CardBus bus> on cbb1 > pccard1: <16-bit PCCard bus> on cbb1 > cbb1: [MPSAFE] > isab0: <PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX4 UDMA33 controller> port 0x860-0x86f at device 7.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata0: [MPSAFE] > ata1: at 0x170 irq 15 on atapci0 > ata1: [MPSAFE] > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xece0-0xecff irq 11 at device 7.2 on pci0 > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > piix0: <PIIX Timecounter> port 0x840-0x84f at device 7.3 on pci0 > Timecounter "PIIX" frequency 3579545 Hz quality 0 > pcib1: <PCI-PCI bridge> at device 17.0 on pci0 > pci1: <PCI bus> on pcib1 > pci_cfgintr: 0:17 INTB routed to irq 11 > pcib1: slot 1 INTA is routed to irq 11 > pci_cfgintr: 0:17 INTB routed to irq 11 > pcib1: slot 5 INTA is routed to irq 11 > pci_cfgintr: 0:17 INTD routed to irq 11 > pcib1: slot 7 INTA is routed to irq 11 > pci_cfgintr: 0:17 INTA routed to irq 11 > pcib1: slot 8 INTA is routed to irq 11 > xl0: <3Com 3c900-COMBO Etherlink XL> port 0xfcc0-0xfcff irq 11 at device 1.0 on pci1 > end (fcff) > sc->iolimit (fff) > pcib1: device xl0 requested unsupported I/O range 0xfcc0-0xfcff (decoding 0x0-0xfff) > xl0: couldn't map ports/memory > device_probe_and_attach: xl0 attach returned 6 > atapci1: <CMD 646 WDMA2 controller> port 0xfc80-0xfc8f,0xfc98-0xfc9b,0xfca0-0xfca7,0xfcb0-0xfcb3,0xfcb8-0xfcbf irq 11 at device 5.0 on pci1 > end (fc8f) > sc->iolimit (fff) > pcib1: device atapci1 requested unsupported I/O range 0xfc80-0xfc8f (decoding 0x0-0xfff) > atapci1: [MPSAFE] > atapci1: HW has secondary channel disabled > end (fcbf) > sc->iolimit (fff) > pcib1: device atapci1 requested unsupported I/O range 0xfcb8-0xfcbf (decoding 0x0-0xfff) > ahc0: <Adaptec aic7860 Ultra SCSI adapter> port 0xf800-0xf8ff mem 0xfdfff000-0xfdffffff irq 11 at device 7.0 on pci1 > end (f8ff) > sc->iolimit (fff) > pcib1: device ahc0 requested unsupported I/O range 0xf800-0xf8ff (decoding 0x0-0xfff) > ahc0: can't allocate register resources > device_probe_and_attach: ahc0 attach returned 12 > xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xfc40-0xfc7f irq 11 at device 8.0 on pci1 > end (fc7f) > sc->iolimit (fff) > pcib1: device xl0 requested unsupported I/O range 0xfc40-0xfc7f (decoding 0x0-0xfff) > xl0: couldn't map ports/memory > device_probe_and_attach: xl0 attach returned 6 > orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 > pmtimer0 on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model Generic PS/2 mouse, device ID 0 > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > unknown: <PNP0c01> can't assign resources (port) > unknown: <PNP0303> can't assign resources (port) > unknown: <PNP0f13> can't assign resources (irq) > unknown: <PNP0501> can't assign resources (port) > unknown: <SMCf010> can't assign resources (irq) > unknown: <PNP0401> can't assign resources (port) > unknown: <CSC0000> can't assign resources (irq) > unknown: <PNP0700> can't assign resources (port) > Timecounter "TSC" frequency 233864918 Hz quality 800 > Timecounters tick every 10.000 msec > rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem 0x88002000-0x880021ff irq 11 at device 0.0 on cardbus1 > rl0: Ethernet address: 00:40:f4:91:cc:75 > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > GEOM: create disk ad0 dp=0xc2048760 > ad0: 19077MB <IC25N020ATCS04-0> [38760/16/63] at ata0-master UDMA33 > acd0: CDROM <CD-ROM CDR_U200> at ata1-master PIO3 > Mounting root from ufs:/dev/ad0s2a > > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org" > Hi, my IBM R40 works fine with these settings: hw.pci.allhw.pci.allow_unsupported_io_range="1" hw.cbb.memory_range="0x20000000" You must check the second key for your special device. Regards, Christoph
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?408519D9.3040009>