From owner-freebsd-isp Mon Sep 2 07:51:22 1996 Return-Path: owner-isp Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id HAA16700 for isp-outgoing; Mon, 2 Sep 1996 07:51:22 -0700 (PDT) Received: from zit1.zit.th-darmstadt.de (root@zit1.zit.th-darmstadt.de [130.83.63.20]) by freefall.freebsd.org (8.7.5/8.7.3) with ESMTP id HAA16669; Mon, 2 Sep 1996 07:51:11 -0700 (PDT) Received: from localhost (petzi@localhost) by zit1.zit.th-darmstadt.de (8.7.5/8.6.9) with SMTP id QAA15155; Mon, 2 Sep 1996 16:50:51 +0200 (MET DST) Date: Mon, 2 Sep 1996 16:50:50 +0200 (MET DST) From: Michael Beckmann To: isp@freebsd.org, hardware@freebsd.org Subject: Cyclades 8 Port ISA problems Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-isp@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hello, I have installed a Cyclades multiport card and compiled a new Kernel with the cy driver. Then I followed the instructions in the FreeBSD Handbook on the web pages, and made the device special files. Then I entered these devices in /etc/ttys . But after the reboot, I'm always getting messages about ttyc4 to 7 not being configured. Any ideas what went wrong ? The boot messages say that the card is being recognized. Unfortunately I don't have the card documentation handy. Sep 2 18:33:55 dalx7 getty: /dev/ttyc4: Device not configured Sep 2 18:33:55 dalx7 getty: /dev/ttyc5: Device not configured Sep 2 18:33:55 dalx7 getty: /dev/ttyc7: Device not configured Sep 2 18:33:55 dalx7 getty: /dev/ttyc6: Device not configured Michael