From owner-freebsd-hardware Wed Nov 11 15:18:47 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id PAA16712 for freebsd-hardware-outgoing; Wed, 11 Nov 1998 15:18:47 -0800 (PST) (envelope-from owner-freebsd-hardware@FreeBSD.ORG) Received: from marcos.networkcs.com (marcos.networkcs.com [137.66.16.1]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id PAA16707 for ; Wed, 11 Nov 1998 15:18:46 -0800 (PST) (envelope-from jeff@us.networkcs.com) Received: from us.networkcs.com (us.networkcs.com [137.66.11.15]) by marcos.networkcs.com (8.9.0.Beta5/8.9.0.Beta5) with ESMTP id RAA28007 for ; Wed, 11 Nov 1998 17:18:28 -0600 (CST) Received: (from jeff@localhost) by us.networkcs.com (8.8.7/8.8.7) id RAA25718 for freebsd-hardware@FreeBSD.ORG; Wed, 11 Nov 1998 17:18:26 -0600 (CST) Date: Wed, 11 Nov 1998 17:18:26 -0600 (CST) From: Jeff Turner Message-Id: <199811112318.RAA25718@us.networkcs.com> To: freebsd-hardware@FreeBSD.ORG Subject: Netfinity 7000-M10, not seeing PCI busses Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Howdy, I've got an IBM Netfinity 7000-M10 (PII-Xeon/400)which has three hot-plug PCI busses. I'm trying to run 2.2.7 on it, and it fails to detect cards on two of the three busses (it sees two busses, one of which I'm guessing is for the embedded devices). I tried booting a 3.0 kernel and it also didn't see cards that were plugged into two of the three busses. Anyone have any ideas? -Jeff Here is the verbose kernel output from a boot (with PCI_BRIDGE_DEBUG): ------- Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2.7-RELEASE #0: Wed Nov 11 07:36:02 CST 1998 jeff@t2.networkcs.com:/usr/src/sys/compile/XEON Calibrating clock(s) ... i586 clock: 400010724 Hz, i8254 clock: 1193203 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency CLK_USE_I586_CALIBRATION not specified - using old calibration method CPU: Pentium II (quarter-micron) (400.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x653 Stepping=3 Features=0x183fbff,,MMX,> real memory = 134217728 (131072K bytes) Physical memory chunk(s): 0x00001000 - 0x0009dfff, 643072 bytes (157 pages) 0x00260000 - 0x07ff5fff, 131686400 bytes (32150 pages) avail memory = 129232896 (126204K bytes) DPT: RAID Manager driver, Version 1.0.5 pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x80011018 pcibus_setup(1a): mode1res=0x80000000 (0x80000000) pcibus_check: device 0 is there (id=71108086) Probing for devices on PCI bus 0: configuration mode 1 allows 32 devices. config header: 0x71108086 0x0280010f 0x06010002 0x00800000 chip0 rev 2 on pci0:0:0 config header: 0x71118086 0x02800005 0x01018001 0x00006000 chip1 rev 1 on pci0:0:1 register_io: bus=0 base=450 limit=45f mapreg[20] type=1 addr=00000450 size=0010. config header: 0x71128086 0x02800005 0x0c030001 0x00006000 chip2 rev 1 int d irq ?? on pci0:0:2 register_io: bus=0 base=460 limit=47f mapreg[20] type=1 addr=00000460 size=0020. config header: 0x71138086 0x02800003 0x06800002 0x00000000 chip3 rev 2 on pci0:0:3 config header: 0x00221014 0x02800147 0x06040007 0x00016008 chip4 rev 7 on pci0:1:0 bridge from pci0 to pci1 through 1. mapping regs: io:22803131 mem:36003500 pmem:ffe0fff0 register_io: bus=0 base=3000 limit=3fff register_mem: bus=0 base=35000000 limit=360fffff register_mem: bus=0 base=fff00000 limit=ffefffff config header: 0x89015333 0x02000003 0x03000016 0x00000000 vga0 rev 22 int a irq ?? on pci0:10:0 register_mem: bus=0 base=30000000 limit=33ffffff mapreg[10] type=0 addr=30000000 size=4000000. config header: 0x81789004 0x02800157 0x01000000 0x00006408 ahc0 rev 0 int a irq 5 on pci0:11:0 register_io: bus=0 base=2000 limit=20ff mapreg[10] type=1 addr=00002000 size=0100. register_mem: bus=0 base=362ff000 limit=362fffff mapreg[14] type=0 addr=362ff000 size=1000. reg16: ioaddr=0x2000 size=0x100 ahc0: Reading SEEPROM...done. internal50 cable not present internal68 cable not present brdctl == 0xec external cable is present eprom is present brdctl == 0xac low byte termination enabled, high byte termination enabled ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs ahc0: Resetting Channel A ahc0: Downloading Sequencer Program...ahc0: 374 instructions downloaded Done ahc0: Probing channel A ahc0: target 0 using 16Bit transfers ahc0: target 0 synchronous at 20.0MHz, offset = 0x8 (ahc0:0:0): "SEAGATE ST19171W 0024" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 8683MB (17783112 512 byte sectors) sd0(ahc0:0:0): with 5268 cyls, 20 heads, and an average 168 sectors/track config header: 0x905010b7 0x02000147 0x02000000 0x00006000 vx0 <3COM 3C905 Fast Etherlink XL PCI> rev 0 int a irq 9 on pci0:12:0 register_io: bus=0 base=2180 limit=21bf mapreg[10] type=1 addr=00002180 size=0040. mii[*mii*]: disable 'auto select' with DOS util! address 00:60:08:c1:76:5a config header: 0x84ca8086 0x00000000 0x06000003 0x00000000 chip5 rev 3 on pci0:16:0 config header: 0x84cb8086 0x22800156 0x06000002 0x00006008 chip6 rev 2 on pci0:18:0 config header: 0x84cb8086 0x22800156 0x06000002 0x00006008 chip7 rev 2 on pci0:19:0 config header: 0x84cb8086 0x22800156 0x06000002 0x00006008 chip8 rev 2 on pci0:20:0 pci0: uses 67112960 bytes of memory from 30000000 upto ffefffff. pci0: uses 368 bytes of I/O space from 450 upto 3fff. pci0: subordinate busses from 1 upto 1. Probing for devices on PCI bus 1: config header: 0x00dc1014 0x02800157 0x06800002 0x00006408 chip9 rev 2 int a irq 3 on pci1:2:0 register_mem: bus=1 base=36012000 limit=360120ff [pci1 uses memory from 35000000 to 360fffff] mapreg[10] type=0 addr=36012000 size=0100. register_io: bus=1 base=3000 limit=30ff mapreg[14] type=1 addr=00003000 size=0100. register_mem: bus=1 base=36000000 limit=3600ffff [pci1 uses memory from 35000000 to 360fffff] mapreg[18] type=0 addr=36000000 size=10000. register_io: bus=1 base=3300 limit=330f mapreg[1c] type=1 addr=00003300 size=0010. DPT: PCI SCSI HBA Driver, version 1.4.3 config header: 0x78959004 0x02900157 0x01000004 0x00806408 pci1:4:0: Adaptec, device=0x7895, class=storage (scsi) int a irq 10 [no driver assigned] map(10): io(3100) map(14): mem32(36010000) config header: 0x78959004 0x02900157 0x01000004 0x00806408 pci1:4:1: Adaptec, device=0x7895, class=storage (scsi) int b irq 11 [no driver assigned] map(10): io(3200) map(14): mem32(36011000) pci1: uses 65792 bytes of memory from 36000000 upto 360120ff. pci1: uses 272 bytes of I/O space from 3000 upto 330f. Probing for devices on the ISA bus: sc0: the current keyboard controller command byte 0045 kbdio: DIAGNOSE status:0055 kbdio: TEST_KBD_PORT status:0000 kbdio: RESET_KBD return code:00fa kbdio: RESET_KBD status:00aa sc0 at 0x60-0x6f irq 1 on motherboard sc0: BIOS video mode:3 sc0: VGA registers upon power-up 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: video mode:24 sc0: VGA registers in BIOS for mode:24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: VGA registers to be used for mode:24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: rows_offset:1 sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 fe0 not found at 0x300 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: irq maps: 0x1 0x1 0x1 0x1 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 not found at 0x2f8 sio2: disabled, not probed. sio3: disabled, not probed. lpt0 not found at 0xffffffff lpt1 not found at 0xffffffff mse0: wrong signature ff mse0 not found at 0x23c psm0: current command byte:0045 kbdio: TEST_AUX_PORT status:0000 kbdio: RESET_AUX return code:00fa kbdio: RESET_AUX status:00aa kbdio: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: status 10 00 64 psm: data 08 00 00 psm: data 08 00 00 psm: status 00 02 64 psm0 at 0x60-0x64 irq 12 on motherboard psm0: model Generic PS/2 mouse, device ID 0, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (atapi): , removable, intr, dma, iordis wcd0: 2412/5512Kb/sec, 128Kb cache, audio play, 255 volume levels, ejectable tray wcd0: 120mm data disc loaded, unlocked wdc1 not found at 0x170 bt0 not found at 0x330 uha0 not found at 0x330 aha0 not found at 0x330 aic0 not found at 0x340 nca0 not found at 0x1f88 nca1 not found at 0x350 sea0 not found wt0 not found at 0x300 mcd0: timeout getting status mcd0 not found at 0x300 matcdc0 not found at 0x230 scd0 not found at 0x230 ie0: unknown board_id: f000 ie0 not found at 0x300 ep0 not found at 0x300 ex0 not found at 0xffffffff le0 not found at 0x300 lnc0 not found at 0x280 ze0 not found at 0x300 zp0 not found at 0x300 cs0: disabled, not probed. npx0 flags 0x1 on motherboard npx0: INT 16 interface apm0: disabled, not probed. imasks: bio c0084060, tty c0031012, net c0060200 BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. Considering FFS root f/s. sd0s1: type 0x7, start 63, end = 3068414, size 3068352 : OK sd0s2: type 0x6, start 3068415, end = 3261194, size 192780 : OK sd0s3: type 0xa5, start 3261195, end = 17767889, size 14506695 : OK To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message