Date: Sun, 19 Sep 2010 10:26:18 +0200 From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-usb@freebsd.org Subject: Re: FreeBSD 8.1, if_cdce and an OpenMoko phone Message-ID: <201009191026.18878.hselasky@c2i.net> In-Reply-To: <20100919011027.9e457282.torfinn.ingolfsen@broadpark.no> References: <20100919011027.9e457282.torfinn.ingolfsen@broadpark.no>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sunday 19 September 2010 01:10:27 Torfinn Ingolfsen wrote: > Hi, > > Under FreeBSD 7.3-stable, I could connect my Neo FreeRunner (Openmoko > phone) via usb cable to my workstation, kldload if_cdce and get an > ethernet interface up. > Now running FreeBSD 8.1-release on said workstation: > root@kg-work2# uname -a > FreeBSD kg-work2.kg4.no 8.1-RELEASE FreeBSD 8.1-RELEASE #0: Mon Jul 19 > 02:55:53 UTC 2010 > root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 > > and the FreeRunner is detected like this: > root@kg-work2# usbconfig > ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) > pwr=ON ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL > (12Mbps) pwr=ON ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST > spd=FULL (12Mbps) pwr=ON ugen3.1: <EHCI root HUB Intel> at usbus3, cfg=0 > md=HOST spd=HIGH (480Mbps) pwr=ON ugen2.2: <RNDIS/Ethernet Gadget Linux > 2.6.29-rc3-v21 with s3c2410_udc> at usbus2, cfg=0 md=HOST spd=FULL > (12Mbps) pwr=ON > > and cdce(4) is already in the GENERIC kernel. From /var/log/messages: > Sep 19 00:06:49 kg-work2 root: Unknown USB device: vendor 0x1457 product > 0x5122 bus uhub2 Sep 19 00:06:49 kg-work2 kernel: ugen2.2: <Linux > 2.6.29-rc3-v21 with s3c2410_udc> at usbus2 Sep 19 00:12:47 kg-work2 > kernel: interface cdce.1 already present in the KLD 'kernel'! > > The problem is of course that therer isn't an ethernet interface for this > usb device: root@kg-work2# ifconfig > em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC> > ether 00:08:74:b3:5e:c8 > inet 10.1.150.16 netmask 0xffff0000 broadcast 10.1.255.255 > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> metric 0 mtu 1500 > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > options=3<RXCSUM,TXCSUM> > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > inet6 ::1 prefixlen 128 > inet 127.0.0.1 netmask 0xff000000 > nd6 options=3<PERFORMNUD,ACCEPT_RTADV> > > So, what magic tricks do I need to perform to get this working under 8.1? > > References: > 1) http://wiki.openmoko.org/wiki/Neo_FreeRunner Hi, You need to: usbconfig -d X.Y set_config 1 To get it working. --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201009191026.18878.hselasky>