Date: Fri, 7 Sep 2018 18:29:37 +0300 From: Daniel Braniss <danny@cs.huji.ac.il> To: Emmanuel Vadot <manu@bidouilliste.com> Cc: "freebsd-arm@freebsd.org" <arm@freebsd.org> Subject: Re: nanopi/allwinner h3/h5/a64 and if_awg blues Message-ID: <256B3CE1-92E5-4450-B5FE-B32D1FB20005@cs.huji.ac.il> In-Reply-To: <20180907141500.8a4573ccd055843b2879d437@bidouilliste.com> References: <B13CC396-A937-48EF-87F1-179E5200D98A@cs.huji.ac.il> <20180907141500.8a4573ccd055843b2879d437@bidouilliste.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> On 7 Sep 2018, at 15:15, Emmanuel Vadot <manu@bidouilliste.com> wrote: >=20 > On Thu, 6 Sep 2018 10:08:02 +0300 > Daniel Braniss <danny@cs.huji.ac.il> wrote: >=20 >> Hi, >> as far as I can tell, all these platforms share the same driver, but = not the same dts >> in any case this is the current status: >> on h3: only detected/works if cable is connected >> on h5: is detected even without cable and works after cable is = inserted. >> Note: to get it working had to add sun50i-h5-neo2.dts to = modules/dtb/allwinner/Makefile >>=20 >> on a64: nothing, nada. >=20 > Depend on the board. >=20 >> so, any idea as to how to get it working on an sun50i-a64 = (nanopi-a64)?=20 >=20 > The DTS for the NanoPi is missing the emac node. any hints? I tried several different overlays(borrowing stuff from pine) = but so far the best i got was: awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c3ffff irq 32 on = simplebus0 awg0: PHY type: rmii, conf mode: reg awg0: EMAC clock: 0x00002000 awg0: AHB frequency 150000000 Hz, MDC div: 0x2 awg0: cannot attach PHY device_attach: awg0 attach returned 6=09 >=20 >> BTW, I did get the wireless to work! >=20 > What wireless ? Ah, just realised, there is an onboard, but that is not supported. I succeeded with a dongle - can=E2=80=99t remember off hand which, but = the reason I mentioned it was that the dongle does not work on the other socs, so at least on the nano-a64 i = have some network connectivity. >=20 >>=20 >> cheers, >> danny >>=20 >> _______________________________________________ >> freebsd-arm@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >> To unsubscribe, send any mail to = "freebsd-arm-unsubscribe@freebsd.org" >=20 >=20 > --=20 > Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?256B3CE1-92E5-4450-B5FE-B32D1FB20005>