From owner-freebsd-stable Wed Aug 23 9:45:15 2000 Delivered-To: freebsd-stable@freebsd.org Received: from front5m.grolier.fr (front5m.grolier.fr [195.36.216.55]) by hub.freebsd.org (Postfix) with ESMTP id 45B4B37B422 for ; Wed, 23 Aug 2000 09:45:01 -0700 (PDT) Received: from club-internet.fr (nas14-35.vlt.club-internet.fr [195.36.162.35]) by front5m.grolier.fr (8.9.3/No_Relay+No_Spam_MGC990224) with ESMTP id SAA11036 for ; Wed, 23 Aug 2000 18:44:57 +0200 (MET DST) Message-ID: <39A40077.49F228E0@club-internet.fr> Date: Wed, 23 Aug 2000 18:48:55 +0200 From: David Scialom X-Mailer: Mozilla 4.72 [en] (X11; I; FreeBSD 4.0-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-stable@freebsd.org Subject: UDMA66 not recognized Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have also the problem that my FreeBSD does not recognize my Matrox hard disk drive which is UDMA 66 and is connected to the first controller with a 80 pin cable. FreeBSD use only the drive with the UDMA 33 mode ( see my dmesg output below). It possible that the reason is that there is a second drive on the OTHER controller which does not support UDMA 66 ? Can someone help me? David ------------------------------------------------------------------------ Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-RELEASE #0: Tue Aug 15 13:00:07 CEST 2000 root@lupo:/usr/src/sys/compile/MYKERNEL Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon (535.28-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x383f9ff real memory = 67092480 (65520K bytes) config> di sn0 config> di lnc0 config> di le0 config> di ie0 config> di fe0 config> di ed0 config> di cs0 config> q avail memory = 60948480 (59520K bytes) Preloaded elf kernel "kernel" at 0xc03f0000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03f009c. Pentium Pro MTRR support enabled md0: Malloc disk npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib2: at device 1.0 on pci0 pci1: on pcib2 isab0: at device 4.0 on pci0 isa0: on isab0 atapci0: port 0xd800-0xd80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at 4.2 irq 5 pcm0: port 0xd000-0xd03f irq 10 at device 11.0 on pci0 pci0: at 12.0 irq 11 pcib1: on motherboard pci2: on pcib1 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60-0x6f on isa0 atkbd0: irq 1 on atkbdc0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: IEEE1284 device found /NIBBLE/ECP Probing for PnP devices on ppbus0: ppbus0: PJL,MLC,PCLXL,PCL,POSTSCRIPT ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port plip0: on ppbus0 ad0: 9770MB [19852/16/63] at ata0-master using UDMA33 ad3: 3077MB [6253/16/63] at ata1-slave using UDMA33 acd0: CDROM at ata1-master using PIO4 Mounting root from ufs:/dev/ad0s2a ---------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message