Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 10 Apr 2006 07:52:36 -0700
From:      Maxim Sobolev <sobomax@FreeBSD.org>
To:        Kurt Jaeger <pi@c0mplx.org>
Cc:        freebsd-current@FreeBSD.org, Rainer Duffner <rainer@ultra-secure.de>
Subject:   Re: [DOCUMENT] Re: Intel Macs that boot FreeBSD?
Message-ID:  <443A7134.2060800@FreeBSD.org>
In-Reply-To: <20060410100121.GA76356@home.c0mplx.org>
References:  <2C74BB8F-271B-4505-9D94-B270B3A4ACBA@nordahl.net> <44348603.9070503@FreeBSD.org> <20060406190944.G56354@lexi.siliconlandmark.com> <4435B303.5040205@FreeBSD.org> <196C209A-A585-4AD5-B7C9-A27DD57ECD8C@snsonline.net> <20060408103224.GR80492@spc.org> <20060408034357.A44217@xorpc.icir.org> <20060408105014.GV80492@spc.org> <44398452.6030007@FreeBSD.org> <443A240E.8080404@ultra-secure.de> <20060410100121.GA76356@home.c0mplx.org>

next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------050209040900010500090104
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit

Oh, cool disabling psm and atkbd/atkbdc helps! The kernel starts 
booting, but something goes wrong and it dies with:

avail memory = 1025830912 (978 MB)
AP #1 (PHY# 1) failed!
panic y/n? [y]

Disabling apic helps to boot the system, following is first dmesg of 
FreeBSD running on Macintel:

-Maxim

Kurt Jaeger wrote:
> Hi!
> 
>>> Some progress: further investigation revealed that cdboot has been 
>>> hanging when trying to enable A20 line, apparently Mac simply don't 
>>> have relevant legacy hardware. 
>> The Intel-Mac-Hardware is touted to be the first legacy-free(TM) ("this 
>> time really") Intel-Hardware that is generally available.
>> A testimonial to where the computing industry could be now, had MSDOS 
>> been abandoned 20 years ago.
> 
> See
> 
> http://ezine.daemonnews.org/200604/netvista_s40.html
> 
> Someone describes the install process for some IBM legacy-free HW.
> 
> Maybe this helps.
> 


--------------050209040900010500090104
Content-Type: text/plain;
 name="macbook.dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="macbook.dmesg"

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #2: Mon Apr 10 13:40:44 UTC 2006
    root@:/usr/src/sys/i386/compile/MACBOOK
Using 64 colors for the VM-PQ tuning (2048, 8)
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b08000.
Preloaded elf module "/boot/kernel/geom_label.ko" at 0xc0b082c4.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b08374.
Calibrating clock(s) ... i8254 clock: 781653 Hz
781653 Hz differs from default of 1193182 Hz by more than 1%
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3027797532 Hz
CPU: Genuine Intel(R) CPU           T2500  @ 2.00GHz (3027.80-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6e8  Stepping = 8
  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,<b14>,<b15>>
  AMD Features=0x100000<NX>
  Cores per package: 2

Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
Data TLB: 4 KB Pages, 4-way set associative, 128 entries
Instruction TLB: 4 MB pages, fully associative, 2 entries
2nd-level cache: 2-MB, 8-way set associative, 64-byte line size
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
Data TLB: 4 MB Pages, 4-way set associative, 8 entries
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line
real memory  = 1057738752 (1008 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000003dec8fff, 1026166784 bytes (250529 pages)
avail memory = 1025761280 (978 MB)
pnpbios: Found PnP BIOS data at 0xc00fe0e0
pnpbios: Entry = f0000:bc6f  Rev = 1.0
pnpbios: OEM ID 8224744e
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd0 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: INT 16 interface
acpi0: <APPLE Apple00> on motherboard
acpi0: [MPSAFE]
acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000fb04
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=27a08086)
pcibios: No call entry point
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
atpic: Programming IRQ9 as level/low
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 0 func 0
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  1 3 4 5 6 7 10 12 14 15
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  1 3 4 5 6 7 11 12 14 15
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  1 3 4 5 6 7 11 12 14 15
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  1 3 4 5 6 7 10 12 14 15
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  1 3 4 5 6 7 11 12 14 15
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  1 3 4 5 6 7 11 12 14 15
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link4: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link4: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link4: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link5: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link5: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link5: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 11 12 14 15
pci_link6: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  1 3 4 5 6 7 10 12 14 15
pci_link6: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link6: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  1 3 4 5 6 7 10 12 14 15
pci_link7: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 5 6 7 11 12 14 15
pci_link7: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 5 6 7 11 12 14 15
pci_link7: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 11 12 14 15
acpi_hpet0: Vendor: 0x8086
acpi_hpet0: Leg_Route_Cap: 1
acpi_hpet0: Count_Size_Cap: 1
acpi_hpet0: Num_Tim_Cap: 1
acpi_hpet0: Rev_id: 0x1
acpi_hpet0: Period: 69841279 fs (14318180 Hz)
acpi_hpet0: HPET attach
Timecounter "HPET" frequency 14318180 Hz quality -200
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x410
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.1.INTA at func 0: 10
ACPI: Found matching pin for 0.7.INTA at func 0: 10
ACPI: Found matching pin for 0.27.INTA at func 0: 11
pci_link6: BIOS IRQ 11 for 0.27.INTA is invalid
ACPI: Found matching pin for 0.28.INTA at func 0: 11
ACPI: Found matching pin for 0.28.INTB at func 1: 10
ACPI: Found matching pin for 0.28.INTC at func 2: 11
pci_link2: BIOS IRQ 11 for 0.28.INTC is invalid
ACPI: Found matching pin for 0.29.INTA at func 0: 11
ACPI: Found matching pin for 0.29.INTB at func 1: 11
ACPI: Found matching pin for 0.29.INTC at func 2: 11
pci_link2: BIOS IRQ 11 for 0.29.INTC is invalid
ACPI: Found matching pin for 0.29.INTD at func 3: 10
ACPI: Found matching pin for 0.31.INTA at func 1: 11
pci_link2: BIOS IRQ 11 for 0.31.INTA is invalid
ACPI: Found matching pin for 0.31.INTB at func 2: 11
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x8086, dev=0x27a0, revid=0x03
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x27a1, revid=0x03
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib0: slot 1 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKA
found->	vendor=0x8086, dev=0x27a3, revid=0x03
	bus=0, slot=7, func=0
	class=11-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0002, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base 98404000, size 12, enabled
pcib0: matched entry for 0.7.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib0: slot 7 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKA
found->	vendor=0x8086, dev=0x27d8, revid=0x02
	bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type 1, range 64, base 98400000, size 14, enabled
pcib0: matched entry for 0.27.INTA (src \\_SB_.PCI0.LPCB.LNKG:0)
pci_link6: Picked IRQ 9 with weight 0
pcib0: slot 27 INTA routed to irq 9 via \\_SB_.PCI0.LPCB.LNKG
found->	vendor=0x8086, dev=0x27d0, revid=0x02
	bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
pcib0: matched entry for 0.28.INTA (src \\_SB_.PCI0.LPCB.LNKB:0)
pcib0: slot 28 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKB
found->	vendor=0x8086, dev=0x27d2, revid=0x02
	bus=0, slot=28, func=1
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
pcib0: matched entry for 0.28.INTB (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib0: slot 28 INTB routed to irq 10 via \\_SB_.PCI0.LPCB.LNKA
found->	vendor=0x8086, dev=0x27d4, revid=0x02
	bus=0, slot=28, func=2
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
pcib0: matched entry for 0.28.INTC (src \\_SB_.PCI0.LPCB.LNKC:0)
pci_link2: Picked IRQ 9 with weight 2
pcib0: slot 28 INTC routed to irq 9 via \\_SB_.PCI0.LPCB.LNKC
found->	vendor=0x8086, dev=0x27c8, revid=0x02
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type 4, range 32, base 000040a0, size  5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LPCB.LNKH:0)
pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKH
found->	vendor=0x8086, dev=0x27c9, revid=0x02
	bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type 4, range 32, base 00004080, size  5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LPCB.LNKD:0)
pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LPCB.LNKD
found->	vendor=0x8086, dev=0x27ca, revid=0x02
	bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	map[20]: type 4, range 32, base 00004060, size  5, enabled
pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LPCB.LNKC:0)
pcib0: slot 29 INTC routed to irq 9 via \\_SB_.PCI0.LPCB.LNKC
found->	vendor=0x8086, dev=0x27cb, revid=0x02
	bus=0, slot=29, func=3
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=10
	map[20]: type 4, range 32, base 00004040, size  5, enabled
pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib0: slot 29 INTD routed to irq 10 via \\_SB_.PCI0.LPCB.LNKA
found->	vendor=0x8086, dev=0x27cc, revid=0x02
	bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base 98405400, size 10, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LPCB.LNKH:0)
pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKH
found->	vendor=0x8086, dev=0x2448, revid=0xe2
	bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x27b9, revid=0x02
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x27df, revid=0x02
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type 4, range 32, base 000040c0, size  4, enabled
pcib0: matched entry for 0.31.INTA (src \\_SB_.PCI0.LPCB.LNKC:0)
pcib0: slot 31 INTA routed to irq 9 via \\_SB_.PCI0.LPCB.LNKC
found->	vendor=0x8086, dev=0x27c4, revid=0x02
	bus=0, slot=31, func=2
	class=01-01-8f, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 000040d8, size  3, enabled
	map[14]: type 4, range 32, base 000040f4, size  2, enabled
	map[18]: type 4, range 32, base 000040d0, size  3, enabled
	map[1c]: type 4, range 32, base 000040f0, size  2, enabled
	map[20]: type 4, range 32, base 00004020, size  4, enabled
	map[24]: type 1, range 32, base 98405000, size 10, memory disabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPCB.LNKD:0)
pcib0: slot 31 INTB routed to irq 11 via \\_SB_.PCI0.LPCB.LNKD
found->	vendor=0x8086, dev=0x27da, revid=0x02
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type 4, range 32, base 0000efa0, size  5, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPCB.LNKD:0)
pcib0: slot 31 INTB routed to irq 11 via \\_SB_.PCI0.LPCB.LNKD
pcib1: <ACPI PCI-PCI bridge> irq 10 at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x3000-0x3fff
pcib1:   memory decode     0x98300000-0x983fffff
pcib1:   prefetched decode 0x80000000-0x8fffffff
ACPI: Found matching pin for 1.0.INTA at func 0: 10
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found->	vendor=0x1002, dev=0x71c5, revid=0x00
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type 3, range 32, base 80000000, size 28, enabled
pcib1: (null) requested memory range 0x80000000-0x8fffffff: good
	map[14]: type 4, range 32, base 00003000, size  8, enabled
pcib1: (null) requested I/O range 0x3000-0x30ff: in range
	map[18]: type 1, range 32, base 98300000, size 16, enabled
pcib1: (null) requested memory range 0x98300000-0x9830ffff: good
pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib1: slot 0 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKA
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0x80000000-0x8fffffff,0x98300000-0x9830ffff irq 10 at device 0.0 on pci1
pci0: <dasp> at device 7.0 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x2000-0x2fff
pcib2:   memory decode     0x98200000-0x982fffff
pcib2:   prefetched decode 0xfff00000-0xfffff
ACPI: Found matching pin for 2.0.INTA at func 0: 11
pci_link0: BIOS IRQ 11 for 2.0.INTA is invalid
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found->	vendor=0x11ab, dev=0x4362, revid=0x22
	bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 2 messages, 64 bit
	map[10]: type 1, range 64, base 98200000, size 14, enabled
pcib2: (null) requested memory range 0x98200000-0x98203fff: good
	map[18]: type 4, range 32, base 00002000, size  8, enabled
pcib2: (null) requested I/O range 0x2000-0x20ff: in range
pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib2: slot 0 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKA
skc0: <Apple MacBook Pro Gigabit Ethernet> port 0x2000-0x20ff mem 0x98200000-0x98203fff irq 10 at device 0.0 on pci2
skc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0x98200000
skc0: interrupt moderation is 100 us
skc0: bad VPD resource id: expected 82 got 0
skc0: unknown media type: 0x31
device_attach: skc0 attach returned 6
pcib3: <ACPI PCI-PCI bridge> irq 10 at device 28.1 on pci0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0xf000-0xfff
pcib3:   memory decode     0x98100000-0x981fffff
pcib3:   prefetched decode 0xfff00000-0xfffff
ACPI: Found matching pin for 3.0.INTA at func 0: 11
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
found->	vendor=0x168c, dev=0x001c, revid=0x01
	bus=3, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type 1, range 64, base 98100000, size 16, enabled
pcib3: (null) requested memory range 0x98100000-0x9810ffff: good
pcib3: matched entry for 3.0.INTA (src \\_SB_.PCI0.LPCB.LNKB:0)
pcib3: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKB
pci3: <network, ethernet> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 9 at device 28.2 on pci0
pcib4:   secondary bus     4
pcib4:   subordinate bus   11
pcib4:   I/O decode        0x1000-0x1fff
pcib4:   memory decode     0x94100000-0x980fffff
pcib4:   prefetched decode 0x90000000-0x93ffffff
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
uhci0: <UHCI (generic) USB controller> port 0x40a0-0x40bf irq 11 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x40a0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x4080-0x409f irq 11 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4080
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x4060-0x407f irq 9 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4060
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x4040-0x405f irq 10 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4040
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0x98405400-0x984057ff irq 11 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0x98405400
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
ugen0: <vendor 0x05ac product 0x8300, class 255/255, rev 2.00/0.0a, addr 2> on uhub4
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib5:   secondary bus     12
pcib5:   subordinate bus   12
pcib5:   I/O decode        0xf000-0xfff
pcib5:   memory decode     0x94000000-0x940fffff
pcib5:   prefetched decode 0xfff00000-0xfffff
pcib5:   Subtractively decoded bridge.
ACPI: Found matching pin for 12.3.INTA at func 0: 11
pci12: <ACPI PCI bus> on pcib5
pci12: physical bus=12
found->	vendor=0x11c1, dev=0x5811, revid=0x61
	bus=12, slot=3, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0216, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base 94000000, size 12, enabled
pcib5: (null) requested memory range 0x94000000-0x94000fff: good
pcib5: matched entry for 12.3.INTA (src \\_SB_.PCI0.LPCB.LNKD:0)
pcib5: slot 3 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKD
fwohci0: <Lucent FW322/323> mem 0x94000000-0x94000fff irq 11 at device 3.0 on pci12
fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x94000000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:16:cb:ff:fe:58:d8:96
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:16:cb:58:d8:96
fwe0: bpf attached
fwe0: Ethernet address: 02:16:cb:58:d8:96
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=2, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 9 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x40c0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=7f ostat1=7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: reset tp2 stat0=ff stat1=ff devices=0x0
ata1: [MPSAFE]
atapci1: <GENERIC ATA controller> port 0x40d8-0x40df,0x40f4-0x40f7,0x40d0-0x40d7,0x40f0-0x40f3,0x4020-0x402f mem 0x98405000-0x984053ff irq 11 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x4020
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x40d8
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x40f4
ata2: reset tp1 mask=03 ostat0=7f ostat1=50
ata2: stat0=0x7f err=0x00 lsb=0xff msb=0xff
ata2: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=7f stat1=50 devices=0x2<ATA_SLAVE>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x40d0
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x40f0
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0x00 lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=7f stat1=ff devices=0x0
ata3: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
battery0: <ACPI Control Method Battery> on acpi0
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: not probed (disabled)
sio1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/11.10, addr 2> on uhub0
ums0: 3 buttons and Z dir.
ukbd0: <Apple Computer Apple Internal Keyboard / Trackpad, class 0/0, rev 2.00/0.60, addr 3> on uhub0
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums1: <Apple Computer Apple Internal Keyboard / Trackpad, class 0/0, rev 2.00/0.60, addr 3> on uhub0
ums1: 3 buttons.
uhid0: <Apple Computer Apple Internal Keyboard / Trackpad, class 0/0, rev 2.00/0.60, addr 3> on uhub0
uhid1: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/1.09, addr 2> on uhub2
ukbd1: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on uhub3
kbd2 at ukbd1
kbd2: ukbd1, generic (0), config:0x0, flags:0x3d0000
ums2: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on uhub3
ums2: 5 buttons.
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 3027797532 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
acd0: setting PIO4 on ICH7 chip
acd0: setting UDMA66 on ICH7 chip
battery0: battery initialization done, tried 1 times
acd0: <MATSHITADVD-R UJ-857/HAE4> DVDR drive at ata0 as master
acd0: read 4134KB/s (4134KB/s) write 689KB/s (689KB/s), 2048KB buffer, UDMA66
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-RW 120mm data disc
Interrupt storm detected on "irq11:"; throttling interrupt source
ata2-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad5: 95396MB <Seagate ST910021AS 3.07> at ata2-slave UDMA33
ad5: 195371568 sectors [193821C/16H/63S] 16 sectors/interrupt 1 depth queue
ad5: Intel check1 failed
ad5: Adaptec check1 failed
ad5: LSI (v3) check1 failed
ad5: LSI (v2) check1 failed
ad5: FreeBSD check1 failed
GEOM_LABEL: Label for provider acd0 is iso9660/NEW.
GEOM: new disk ad5
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ATA PseudoRAID loaded
GEOM: ad5: GPT detected, but no protective MBR.

Manual root filesystem specification:
  <fstype>:<device>  Mount <device> using filesystem <fstype>
                       eg. ufs:da0s1a
  ?                  List valid disk boot devices
  <empty line>       Abort manual input

mountroot> ufs:da0s5
Trying to mount root from ufs:da0s5
umass0: <Myson Century, Inc. USB Mass Storage Device, class 0/0, rev 2.00/b0.07, addr 3> on uhub4
umass0:1:0:-1: Attached to scbus1
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <IC25N040 ATMR04-0 MO2O> Fixed Direct Access SCSI-0 device 
pass0: Serial Number \^_
pass0: 40.000MB/s transfers
GEOM: new disk da0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <IC25N040 ATMR04-0 MO2O> Fixed Direct Access SCSI-0 device 
da0: Serial Number \^_
da0: 40.000MB/s transfers
da0: 38154MB (78140160 512 byte sectors: 255H 63S/T 4864C)
GEOM_LABEL: Label for provider da0s2 is ufs/scratch.
Mount point / had 1 dangling refs

Manual root filesystem specification:
  <fstype>:<device>  Mount <device> using filesystem <fstype>
                       eg. ufs:da0s1a
  ?                  List valid disk boot devices
  <empty line>       Abort manual input

mountroot> ufs:us\^H \^Hfs/scratch
Trying to mount root from ufs:ufs/scratch
start_init: trying /sbin/init

--------------050209040900010500090104--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?443A7134.2060800>