Date: Wed, 14 Nov 2001 13:29:02 -0500 From: "Ilya" <mail@krel.org> To: <freebsd-stable@FreeBSD.ORG> Subject: fxp full duplex problem after upgrade from 4.4 stable to release Message-ID: <01fd01c16d3a$3c59bf90$0100a8c0@ilya> References: <3BF2B4B1.2DA9A2F1@d2.com>
next in thread | previous in thread | raw e-mail | index | archive | help
my fxp interface can no longer negotiate Full-Duplex with the switch. Everything worked fine with Stable. I have these lines in rc.conf: ifconfig_fxp0="inet 192.168.0.3 netmask 255.255.255.0 media 100baseTX mediaopt full-duplex" so i set full-duplex manually not through auto. this is from first dmesg after first reboot after upgrade: Nov 14 01:57:25 alchemistry fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xef00-0xef3f mem 0xfebc000 0-0xfebdffff,0xfebfe000-0xfebfefff irq 15 at device 15.0 on pci0 Nov 14 01:57:25 alchemistry fxp0: *** DISABLING DYNAMIC STANDBY MODE IN EEPROM *** Nov 14 01:57:25 alchemistry fxp0: New EEPROM ID: 0x50a0 Nov 14 01:57:25 alchemistry fxp0: EEPROM checksum @ 0x3f: 0x9b8b -> 0x9b8d Nov 14 01:57:25 alchemistry fxp0: *** PLEASE REBOOT THE SYSTEM NOW FOR CORRECT OPERATION *** Nov 14 01:57:25 alchemistry fxp0: Ethernet address 00:02:b3:27:60:7a Nov 14 01:57:25 alchemistry inphy0: <i82555 10/100 media interface> on miibus0 Nov 14 01:57:25 alchemistry inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto once rebooted this came up in dmesg: Nov 14 02:02:38 alchemistry fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xef00-0xef3f mem 0xfebc000 0-0xfebdffff,0xfebfe000-0xfebfefff irq 15 at device 15.0 on pci0 Nov 14 02:02:38 alchemistry fxp0: Ethernet address 00:02:b3:27:60:7a Nov 14 02:02:38 alchemistry inphy0: <i82555 10/100 media interface> on miibus0 Nov 14 02:02:38 alchemistry inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto any suggestions? FreeBSD alchemistry.net 4.4-STABLE FreeBSD 4.4-STABLE #0: Wed Nov 14 01:32:12 EST 2001 root@alchemistry.net:/usr/obj/usr/src/sys/ALCHEMISTRY i386 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01fd01c16d3a$3c59bf90$0100a8c0>