Date: Wed, 23 Sep 1998 10:36:13 -0700 (PDT) From: Brian Jenkins <b_jenkins@yahoo.com> To: freebsd-hackers@FreeBSD.ORG Subject: PCMCIA Controller Not Found Message-ID: <19980923173613.16462.rocketmail@send103.yahoomail.com>
next in thread | raw e-mail | index | archive | help
I have installed FreeBSD 2.2.6 and PAO-980430 on a single board
computer with a PCMCIA add-on board. The PCMCIA controller chip is a
Cirrus Logic CL-PD6730, but the PCI code is not finding it. I have
included the dmesg output below. How can I change the PCI code or my
configuration to get it working?
Brian Jenkins
b_jenkins@yahoo.com
-----------------------------------------------------
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 2.2.6-RELEASE #7: Mon Sep 21 14:07:29 CDT 1998
root@x.y.z:/usr/src/sys/compile/MNA
Calibrating clock(s) ... i8254 clock: 1193827 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CPU: AMD Am5x86 Write-Back (486-class CPU)
Origin = "AuthenticAMD" Id = 0x4f4 Stepping=4
Features=0x1<FPU>
real memory = 33554432 (32768K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00263000 - 0x01ffdfff, 31043584 bytes (7579 pages)
avail memory = 30437376 (29724K bytes)
Initializing PC-card drivers: aic ep wlp sio spc wdc ncv stg
pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x8000000c
pcibus_setup(1a): mode1res=0x00000001 (0x80000000)
pcibus_check: device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31 -- nothing found
pcibus_setup(1b): mode1res=0x80000000 (0xff000001)
pcibus_check: device 0 is there (id=148910b9)
Probing for devices on PCI bus 0:
configuration mode 1 allows 32 devices.
chip0 <generic PCI bridge (vendor=10b9 device=1489 subclass=0)> rev 0
class 60000 on pci0:0:0
vga0 <VGA-compatible display device> rev 198 class 30000 on pci0:8:0
mapreg[10] type=0 addr=fb000000 size=1000000.
pci0: uses 16777216 bytes of memory from fb000000 upto fbffffff.
Probing for devices on the ISA bus:
sc0: the current keyboard controller command byte 0065
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
kbdio: RESET_KBD return code:00fa
kbdio: RESET_KBD status:00aa
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: BIOS video mode:3
sc0: VGA registers upon power-up
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: video mode:24
sc0: VGA registers in BIOS for mode:24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: VGA registers to be used for mode:24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: rows_offset:1
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 not found at 0x3e8
sio3: disabled, not probed.
sio4: disabled, not probed.
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
bpf: lp0 attached
lpt1 at 0x3bc-0x3c3 on isa
psm0: current command byte:0065
kbdio: TEST_AUX_PORT status:ffffffff
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
psm0: the aux port is not functioning (-1).
psm0 not found at 0x60
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <SunDisk SDIB-80>
wd0: 80MB (163840 sectors), 640 cyls, 8 heads, 32 S/T, 512 B/S
wdc0: unit 1 (wd1): <HAGIWARA SYS-COM HPC-CFT32>
wd1: 31MB (64000 sectors), 500 cyls, 8 heads, 16 S/T, 512 B/S
wdc1 not found at 0x170
aic0 not found at 0x340
spc0 not found at 0x320
ncv0 not found at 0x320
stg0 not found at 0x320
cnw0 not found at 0x300
ep0 not found at 0x300
wlp0 not found at 0x300
Checking slot 0.
PCIC ID = 0xff
Checking slot 1.
PCIC ID = 0xff
Checking slot 2.
PCIC ID = 0xff
Checking slot 3.
PCIC ID = 0xff
pcic0 not found at 0x3e0
Checking slot 4.
PCIC ID = 0xff
Checking slot 5.
PCIC ID = 0xff
Checking slot 6.
PCIC ID = 0xff
Checking slot 7.
PCIC ID = 0xff
pcic1 not found at 0x3e2
Checking slot 4.
PCIC ID = 0xff
Checking slot 5.
PCIC ID = 0xff
Checking slot 6.
PCIC ID = 0xff
Checking slot 7.
PCIC ID = 0xff
pcic1 not found at 0x3e4
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
apm0 not found
imasks: bio c0004040, tty c003009a, net c003009a
BIOS Geometries:
0:027e0720 0..638=639 cylinders, 0..7=8 heads, 1..32=32 sectors
1:01f20710 0..498=499 cylinders, 0..7=8 heads, 1..16=16 sectors
0 accounted for
Device configuration finished.
Considering FFS root f/s.
changing root device to wd0s1a
configure() finished.
bpf: tun0 attached
bpf: sl0 attached
bpf: lo0 attached
wd0s1: type 0xa5, start 32, end = 163839, size 163808 : OK
wd1s1: type 0xa5, start 16, end = 63999, size 63984 : OK
_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980923173613.16462.rocketmail>