Date: Wed, 05 Aug 1998 13:15:29 -0700 From: Peter Haight <psh1@cornell.edu> To: freebsd-multimedia@FreeBSD.ORG Subject: Problems setting up SB AWE32. Message-ID: <199808052015.NAA00299@wartch.rih.org>
next in thread | raw e-mail | index | archive | help
I'm using Luigi's PNP sound stuff that comes with 2.2.6, and it seems to get
detected and everything, but I don't get any sound. The only sound device I
have is /dev/pcm1. How do I create /dev/audio1? I've tried both './MAKEDEV
snd1' and a symlink to pcm1. When I cat a .au file to /dev/pcm1, nothing
happens. What am I missing?
Here's some config info:
-----------------------
Here is a cat /dev/sndstat after I did the MAKDEV:
-----------------------
FreeBSD Audio Driver (980215) May 26 1998 18:38:01
Installed devices:
pcm1: <SoundBlaster 16 4.16> at 0x220 irq 5 dma 1:5
sequencer1: <???> at 0x388 (not functional)
-----------------------
Here is a dmesg:
-----------------------
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.6-RELEASE #0: Tue May 26 18:38:24 PDT 1998
peterh@wartch.rih.org.:/usr/src/sys/compile/WARTCH
CPU: Pentium Pro (300.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x633 Stepping=3
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 134217728 (131072K bytes)
avail memory = 129400832 (126368K bytes)
Probing for devices on PCI bus 0:
chip0 <generic PCI bridge (vendor=8086 device=7180 subclass=0)> rev 3 on pci0:0:0
chip1 <generic PCI bridge (vendor=8086 device=7181 subclass=4)> rev 3 on pci0:1:0
chip2 <Intel 82371AB PCI-ISA bridge> rev 1 on pci0:7:0
chip3 <Intel 82371AB IDE interface> rev 1 on pci0:7:1
chip4 <Intel 82371AB USB interface> rev 1 int d irq ?? on pci0:7:2
chip5 <Intel 82371AB Power management controller> rev 1 on pci0:7:3
ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 10 on pci0:14:0
ahc0: aic7880 Wide Channel, SCSI Id=7, 16/255 SCBs
ahc0: target 1 Tagged Queuing Device
(ahc0:1:0): "SEAGATE ST34501W 0017" type 0 fixed SCSI 2
sd0(ahc0:1:0): Direct-Access 4339MB (8887200 512 byte sectors)
sd0(ahc0:1:0): with 6576 cyls, 8 heads, and an average 168 sectors/track
de0 <Digital 21140A Fast Ethernet> rev 34 int a irq 11 on pci0:15:0
de0: SMC 9332BDT 21140A [10-100Mb/s] pass 2.2
de0: address 00:e0:29:0c:66:07
vga0 <VGA-compatible display device> rev 16 int a irq 9 on pci0:16:0
Probing for devices on PCI bus 1:
Probing for PnP devices:
CSN 1 Vendor ID: CTL00c3 [0xc3008c0e] Serial 0x1c4d4482
pcm1 (SB16pnp <SB16 PnP> sn 0x1c4d4482) at 0x220 irq 5 drq 1 flags 0x15 id 11
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 flags 0x1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x1>
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
pcm0 not found at 0xffffffff
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
changing root device to st0s2a
mountmsdosfs(): Warning: root directory is not a multiple of the clustersize in length
de0: enabling 10baseT port
-----------------------
Here is my kernel config
-----------------------
machine "i386"
ident WARTCH
maxusers 100
config kernel root on st0s2a
cpu "I686_CPU" # aka Pentium Pro(tm)
options "CPU_FASTER_5X86_FPU"
options "NO_F00F_HACK"
options "COMPAT_43"
options SYSVSHM
options SYSVSEM
options SYSVMSG
options "MD5"
options UCONSOLE
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options INET #Internet communications protocols
pseudo-device ether #Generic Ethernet
pseudo-device loop #Network loopback device
pseudo-device bpfilter 2 #Berkeley packet filter
options FFS #Fast filesystem
options NFS #Network File System
options "CD9660" #ISO 9660 filesystem
options FDESC #File descriptor filesystem
options KERNFS #Kernel filesystem
options MFS #Memory filesystem
options MSDOSFS #MS DOS filesystem
controller scbus0 #base SCSI code
device sd0 #SCSI disks
device cd0 #SCSI CD-ROMs
options SCSI_REPORT_GEOMETRY
pseudo-device pty 64 #Pseudo ttys - can go as high as 256
pseudo-device speaker #Play IBM BASIC-style noises out your speaker
pseudo-device log #Kernel syslog interface (/dev/klog)
pseudo-device gzip #Exec gzipped a.out's
pseudo-device su #scsi user
pseudo-device ssc #super scsi
controller isa0
controller pnp0
options XSERVER # support for running an X server.
device sc0 at isa? port "IO_KBD" tty flags 0x01 irq 1 vector scintr
options MAXCONS=16 # number of virtual consoles
options SC_HISTORY_SIZE=200 # number of history buffer lines
device npx0 at isa? port "IO_NPX" iosiz 0x0 flags 0x0 irq 13 vector npxintr
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
device lpt0 at isa? port? tty irq 7 vector lptintr
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x15 vector pcmintr
options AHC_TAGENABLE
options AHC_SCBPAGING_ENABLE
options AHC_ALLOW_MEMIO
controller pci0
controller ahc0
device de0
options COMPAT_LINUX
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199808052015.NAA00299>