Date: Mon, 23 Jun 2003 12:22:14 -0300 From: "Han Hwei Woo" <hhwoo@argosy.ca> To: <freebsd-questions@freebsd.org>, <pippo@bellnet.ca> Subject: Re: changing setup Message-ID: <001101c3399b$39870550$0200a8c0@a7n8x> References: <5.1.0.14.2.20030623102942.00bb4e28@mail.host45.com>
next in thread | previous in thread | raw e-mail | index | archive | help
man em for Intel Gigabit adapters: "The em driver provides support for PCI gigabit Ethernet adapters based on the Intel 82540, 82542, 82543, 82544 and 82546 Ethernet controller chips." I believe there is Serial ATA support for some chipsets in 5.1. No idea on the Fasttrack 378. Problems are likely to occur when your kernel doesn't match your userland. I'm guessing your initial install was 4.5, and you updated directly to 4.8? I would recommend that you try to boot with a 4.8 GENERIC kernel, off a 4.8 CD or floppy. Then try mounting your partitions manually from single user mode, and editing /etc/fstab to match your drive configuration. Han Hwei Woo http://www.argosy.ca/~hhw ----- Original Message ----- From: <pippo@bellnet.ca> To: <freebsd-questions@freebsd.org> Sent: Monday, June 23, 2003 11:39 AM Subject: changing setup > I have just changed my motherboard and consequently drive assignments and > peripherals as well. The old board or processor crashed. :(( > So the new board is an MSI 875-FISR - top of the line with a 3ghz pentium > IV and Intel Gigabit lan card and kGEforce FX5200 video card. > The previous system was a dual pentium II with 450mhz processors. > The problem is the following: how do I boot and reconfigure the system? > What is installed is FBSD 4.8 stable. > When I boot up using the kernel.GENERIC, I get version 4.5 with limited > functions... so, I don't really know what todo with it. > Whe I boot up with the 4.8 SMP kernel, kit freezes just after the network > card is not recognized. > I am hoping I don't have to reinstall everything as that tends to be a PITA. > Also, I don't know if FBSD supports the built-in Intel Gigabit network > adapter; the hardware.txt does not show it. > And what about serial ATA and Promise Fasttrack 378? > Any help would be appreciated... > Thanks in advance, > Pippo > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001101c3399b$39870550$0200a8c0>