From owner-freebsd-stable Wed May 16 8:19:44 2001 Delivered-To: freebsd-stable@freebsd.org Received: from gndrsh.dnsmgr.net (GndRsh.dnsmgr.net [198.145.92.4]) by hub.freebsd.org (Postfix) with ESMTP id 0557737B422 for ; Wed, 16 May 2001 08:19:38 -0700 (PDT) (envelope-from freebsd@gndrsh.dnsmgr.net) Received: (from freebsd@localhost) by gndrsh.dnsmgr.net (8.9.3/8.9.3) id IAA09749; Wed, 16 May 2001 08:19:27 -0700 (PDT) (envelope-from freebsd) From: "Rodney W. Grimes" Message-Id: <200105161519.IAA09749@gndrsh.dnsmgr.net> Subject: Re: ppp problems on 4.3-RELEASE and PPPoE In-Reply-To: <3B028CDB.837B64D4@thehousleys.net> from James Housley at "May 16, 2001 10:21:15 am" To: jim@thehousleys.net (James Housley) Date: Wed, 16 May 2001 08:19:27 -0700 (PDT) Cc: freebsd-stable@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Someplace along the network path between the client and server someone is probably blocking icmp packets, and thus causing path MTU discovery to fail. You have a non standard MTU of 1492 on your PPP link, and without the ICMP type 3, code 4 packets getting through the windblows box is going to use an MTU of 1500. Good luck in finding the person dropping ICMP type 3 packets in your path, unless it happens to be you.... > I have been having problems with the the newer Windows machines, 2000 & > Me, not being able to access some websites. I have had to manually edit > the registry to change the MTU. This should not be needed, because I am > running 4.3-RELEASE which has had the tcpmssfixup feature for a while. > It is enabled. Unfortunately this maching is in an office in Canada, > and I am not in Canada. I am using natd and ipfw for NAT and the > firewall. The link has a static IP if it matters. Below I am attaching > ppp.conf. I have watched some of the data with tcpdump on both tun0 and > ed0, but I am not sure what to look for. > > Suggestion on how to proceed. > > Jim > > ---- ppp.conf ---- > default: > ident user-ppp VERSION (built COMPILATIONDATE) > > # Ensure that "device" references the correct serial port > # for your modem. (cuaa0 = COM1, cuaa1 = COM2) > # > set device /dev/cuaa1 > > set log Phase Chat LCP IPCP CCP tun command > set speed 115200 > set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \ > \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT" > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 > set timeout 180 # 3 minute idle timer (the > default) > add default HISADDR # Add a (sticky) default route > enable dns # request DNS info (for > resolv.conf) > > magma: > ident > set device PPPoE:ed0 > set MRU 1492 > set MTU 1492 > set authname ************** > set authkey ******* > set log Phase Chat Connect > set dial > set login > set ifaddr 10.0.0.1/0 10.0.0.2/0 0.0.0.0/0 0.0.0.0/0 > set timeout 0 > set server +3000 ******* > enable tcpmssfixup > disable dns > set cd 5 > set crtscts off > enable pap > disable pred1 > > ------------------ > -- > /"\ ASCII Ribbon Campaign . > \ / - NO HTML/RTF in e-mail . > X - NO Word docs in e-mail . > / \ ----------------------------------------------------------------- > jeh@FreeBSD.org http://www.FreeBSD.org The Power to Serve > jim@TheHousleys.Net http://www.TheHousleys.net > --------------------------------------------------------------------- > The wise man built his network upon Un*x. > The foolish man built his network upon Windows. > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > -- Rod Grimes - KD7CAX @ CN85sl - (RWG25) rgrimes@gndrsh.dnsmgr.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message