Date: Tue, 3 Sep 2002 11:07:43 +0100 From: Yann Golanski <yann@kierun.org> To: Larry Rosenman <ler@lerctr.org> Cc: freebsd-questions@FreeBSD.ORG, freebsd-mobile@FreeBSD.ORG Subject: Re: i810 and XFree86. Message-ID: <20020903100743.GA31096@kierun.org> In-Reply-To: <1031047330.424.9.camel@lerlaptop.lerctr.org> References: <20020903085525.GA7773@kierun.org> <1031046012.424.0.camel@lerlaptop.lerctr.org> <20020903095829.GA28457@kierun.org> <1031047330.424.9.camel@lerlaptop.lerctr.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Quoth Larry Rosenman on Tue, Sep 03, 2002 at 05:02:10 -0500 > How recent is your X? Can we see a full dmesg from the boot? > If your X isn't 4.2 from a recent CVSup, please upgrade. It is the latest one. XFree86 Version 4.2.0 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 18 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: FreeBSD 4.6 i386 [ELF] Module Loader present Dmesg output included here: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6-STABLE #0: Sun Sep 1 10:51:01 BST 2002 root@falcon.neverness.org:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1126.83-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 266862592 (260608K bytes) avail memory = 254373888 (248412K bytes) Preloaded elf kernel "kernel" at 0xc0518000. Preloaded elf module "agp.ko" at 0xc051809c. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00fdf30 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <Intel model 3577 VGA-compatible display device> at 2.0 irq 9 pci0: <unknown card> (vendor=0x8086, dev=0x3577) at 2.1 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f at device 29.2 on pci0 pci_cfgintr_search: linked (0) to configured irq 9 at 0:29:1 pci_cfgintr: 0:29 INTC routed to irq 9 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ugen0: Sony USB Memory Stick Slot, rev 1.10/1.09, addr 2 pcib1: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0 pci2: <PCI bus> on pcib1 pci2: <unknown card> (vendor=0x104c, dev=0x8023) at 2.0 pcic0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 3 at device 5.0 on pci2 pcic0: PCI Memory allocated: 0x88000000 pccard0: <PC Card bus (classic)> on pcic0 fxp0: <Intel Pro/100 Ethernet> port 0x3000-0x303f mem 0xe0204000-0xe0204fff irq 9 at device 8.0 on pci2 fxp0: Ethernet address 08:00:46:4f:62:ee inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 pci0: <unknown card> (vendor=0x8086, dev=0x2485) at 31.5 irq 9 pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 28615MB <IC25N030ATCS04-0> [58140/16/63] at ata0-master UDMA100 Mounting root from ufs:/dev/ad0s1a pid 137 (XFree86), uid 0: exited on signal 6 (core dumped) pid 151 (XFree86), uid 0: exited on signal 6 (core dumped) Many thanks indeed. -- yann@kierun.org -=*=- www.kierun.org PGP: www.kierun.org/pgp/key-kierun PGP: 009D 7287 C4A7 FD4F 1680 06E4 F751 7006 9DE2 6318 IRC: nick kierun, server spod.uk.amiganet.org, channel #sanctus To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020903100743.GA31096>