Date: Mon, 3 Jan 2000 20:30:12 -0500 (EST) From: Adam <bsdx@looksharp.net> To: Gerard Roudier <groudier@club-internet.fr> Cc: scsi@FreeBSD.ORG Subject: Re: sym troubles Message-ID: <Pine.BSF.4.21.0001032028430.2438-100000@turtle.looksharp.net> In-Reply-To: <Pine.LNX.3.95.1000103233452.1090A-100000@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
If you mean the wide and mhz settings in the card "bios" setup (F2 at boot), I have the cdrom set to wide and 20mhz. I just noticed too that it reports the proper speeds when the cdrom drive contains a cdrom during boot. On Mon, 3 Jan 2000, Gerard Roudier wrote: > >Hello, > >The sym driver gets USER settings of SCSI devices from controller NVRAM >and reports these values as USER settings to CAM. The XPT just suggests >SIM to apply USER settings at initialization. But you can manually change >to better settings using camcontrol, once the system is up. > >Could you check how the device is user-configured in the NVRAM ? >You may let me know if the sym driver is not behaving as it should >regarding sync/wide negotiation. Thanks. > >I will provide a man page for the sym driver, but I donnot have found time >for writing it for the moment. > >Regards, > Gérard. > >On Mon, 3 Jan 2000, Adam wrote: > >> I dont recall if this happened when I tried the driver last (two weeks >> ago) but a -current from today does this for me: >> >> Jan 3 16:00:13 sapphire /kernel: sym0: <875> irq 10 at device 15.0 on >> pci0 >> Jan 3 16:00:13 sapphire /kernel: sym0: Tekram NVRAM, ID 7, Fast-20, SE, >> parity >> checking >> Jan 3 16:00:40 sapphire /kernel: cd1 at sym0 bus 0 target 3 lun 0 >> Jan 3 16:00:40 sapphire /kernel: cd1: <PLEXTOR CD-ROM PX-40TW 1.01> >> Removable C >> D-ROM SCSI-2 device >> Jan 3 16:00:40 sapphire /kernel: cd1: 6.600MB/s transfers (16bit) >> Jan 3 16:00:40 sapphire /kernel: cd1: Attempt to query device size >> failed: NOT >> READY, Medium not present >> >> This is a UltraWide cdrom drive so it should show 40MB/sec right? >> >> >> Jan 3 16:36:07 sapphire /kernel: ncr0: <ncr 53c875 fast20 wide scsi> irq >> 11 at >> device 15.0 on pci0 >> Jan 3 16:36:48 sapphire /kernel: cd1 at ncr0 bus 0 target 3 lun 0 >> Jan 3 16:36:48 sapphire /kernel: cd1: <PLEXTOR CD-ROM PX-40TW 1.01> >> Removable C >> D-ROM SCSI-2 device >> Jan 3 16:36:48 sapphire /kernel: cd1: 40.000MB/s transfers (20.000MHz, >> offset 1 >> 5, 16bit) >> Jan 3 16:36:48 sapphire /kernel: cd1: Attempt to query device size >> failed: NOT >> READY, Medium not present > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0001032028430.2438-100000>