Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 2 Feb 1999 20:45:41 +0300
From:      Igor Vinokurov <igor@rtsnet.ru>
To:        freebsd-scsi@FreeBSD.ORG
Subject:   Bus Device Reset delivered
Message-ID:  <19990202204541.A1360@rtsnet.ru>

next in thread | raw e-mail | index | archive | help
Hello.

Anyone can explain following report?

escape /kernel: ahc0:A:1: no active SCB for reconnecting target - issuing BUS DEVICE RESET
escape /kernel: SAVED_TCL == 0x10 ARG_1 == 0x9 SEQADDR == 0x10a
escape /kernel: ahc0: Bus Device Reset delivered. 2 SCBs aborted
escape /kernel: ahc0: Bus Device Reset delivered. 2 SCBs aborted
escape /kernel: Sending SDTR!!
escape /kernel: sd1(ahc0:1:0): UNIT ATTENTION asc:29,0
escape /kernel: sd1(ahc0:1:0):  Power on, reset, or bus device reset occurred
escape /kernel: , retries:4

just after escape has rebooted without any sync, etc...

We use netserver rack storage/8 connected to ahc0.

dmesg:

ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 1 int a irq 9 on pci0:11:0
ahc0: aic7880 Wide Channel, SCSI Id=9, 16 SCBs
(ahc0:0:0): "IBM DDRS-34560W S92A" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 4357MB (8925000 512 byte sectors)
Sending SDTR!!
(ahc0:1:0): "HP 9.10GB A 80-5252 5252" type 0 fixed SCSI 2
sd1(ahc0:1:0): Direct-Access 8678MB (17773524 512 byte sectors)
Sending SDTR!!
(ahc0:2:0): "HP 9.10GB A 80-1226 " type 0 fixed SCSI 2
sd2(ahc0:2:0): Direct-Access 8678MB (17773524 512 byte sectors)
Sending SDTR!!
(ahc0:3:0): "HP 9.10GB A 80-5252 5252" type 0 fixed SCSI 2
sd3(ahc0:3:0): Direct-Access 8678MB (17773524 512 byte sectors)
Sending SDTR!!
(ahc0:8:0): "HP 9.10GB A 80-1226 " type 0 fixed SCSI 2
sd4(ahc0:8:0): Direct-Access 8678MB (17773524 512 byte sectors)
ahc0:A:14: refuses WIDE negotiation.  Using 8bit transfers
ahc0:A:14: refuses synchronous negotiation. Using asynchronous transfers
(ahc0:14:0): "HP D4902A 2" type 3 fixed SCSI 2
uk0(ahc0:14:0): Unknown 
ahc0:A:15: refuses WIDE negotiation.  Using 8bit transfers
ahc0:A:15: refuses synchronous negotiation. Using asynchronous transfers
(ahc0:15:0): "HP D4902A 2" type 3 fixed SCSI 2
uk1(ahc0:15:0): Unknown 

What is "Sending SDTR!!"?

-- 
Igor Vinokurov

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990202204541.A1360>