From owner-freebsd-scsi Thu Sep 28 21:33:29 2000 Delivered-To: freebsd-scsi@freebsd.org Received: from dreaming.darkspire.org (dreaming.darkspire.org [12.2.86.250]) by hub.freebsd.org (Postfix) with ESMTP id 1EFC937B422 for ; Thu, 28 Sep 2000 21:33:24 -0700 (PDT) Received: from localhost (oneiros@localhost) by dreaming.darkspire.org (8.9.3/8.9.3) with ESMTP id EAA53430 for ; Thu, 29 Sep 1994 04:40:15 GMT (envelope-from oneiros@dreaming.darkspire.org) Date: Thu, 29 Sep 1994 04:40:15 +0000 (GMT) From: oneiros To: freebsd-scsi@freebsd.org Subject: 4.1.1 and adaptec 29160N Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Greetings, I've run in to a bit of a problem, and i thought this might be the place to get some guidence. My scsi disk, which ran well in 4.1-STABLE, will not boot after i cvsup'ed to 4.1.1-STABLE, error: Root mount failed: 22 (then asks for the ufs mount, which i supply and given the same reply) when trying to boot from the 4.1.1-RELEASE CD, it gives the following panic while initializing da0: panic: going nowehre with my init. as i said, neither the config not the hardware has changed since the last kernel. any suggestions? kernel config has ahc, da and scbus uncommented. any suggestions? thanks muchly, -justin da0: Fixed Direct Access SCSI-3 device da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) ahc0: port 0xb400-0xb4ff mem 0xe0000000-0xe0000fff irq 11 at device 10.0 on pci0 ahc0: aic7892 Wide Channel A, SCSI Id=7, 16/255 SCBs To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message