Date: Thu, 1 Jun 2006 21:20:20 GMT From: Thierry Herbelot <thierry@herbelot.com> To: freebsd-usb@FreeBSD.org Subject: Re: usb/72380: [usb] USB does not work [dual Celeron Abit] Message-ID: <200606012120.k51LKKQ4074634@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR usb/72380; it has been noted by GNATS. From: Thierry Herbelot <thierry@herbelot.com> To: bug-followup@freebsd.org, nrgaravelli@yahoo.com Cc: Subject: Re: usb/72380: [usb] USB does not work [dual Celeron Abit] Date: Thu, 1 Jun 2006 23:18:12 +0200 the problem is absent in -current as of now : the same make of computer (ABIT BP6) runs happily with USB devices off the on-board 440BX chipset : umass0: <USB Flash Disk, class 0/0, rev 2.00/2.00, addr 2> on uhub0 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <031203 U-Storage 2.00> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: 125MB (256000 512 byte sectors: 64H 32S/T 125C) umass0: at uhub0 port 1 (addr 2) disconnected (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry umass0: detached TfH startup messages on this machine : FreeBSD 7.0-CURRENT #1: Thu Jun 1 17:18:31 CEST 2006 TTTT@ZZZZ:/files1/obj/files1/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (334.09-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x665 Stepping = 5 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 100663296 (96 MB) avail memory = 88788992 (84 MB) MPTable: <OEM00000 PROD00000000> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Assuming intbase of 0 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 sequencer 0 created scp 0xc1453c00 ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cpu0 on motherboard cpu1 on motherboard pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xc000-0xc01f irq 19 at device 7.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered piix0: <PIIX Timecounter> port 0x5000-0x500f at device 7.3 on pci0 Timecounter "PIIX" frequency 3579545 Hz quality 0 .... more startup messages
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200606012120.k51LKKQ4074634>