Date: Mon, 2 Apr 2001 16:05:07 -0400 (EDT) From: Mobile Computer <mobile@vta.com> To: freebsd-mobile@freebsd.org Subject: GSM Data Modem Card 2.2.7->4.2R Broken Message-ID: <200104022005.QAA05397@mailhub.vta.com>
next in thread | raw e-mail | index | archive | help
Mon Apr 2 13:06:33 EDT 2001
Hello,
I have a Mitsubishi Electric "GSM DATA CARD" (modem), which I have
been using for quite some time under 2.2.7 PAO with no difficulty on
a Toshiba 2505CDS. I have recently discovered that it fails to work
under 4.2 Release on a Toshiba 1695CDT. It is one of those GSM cards
which connects to an attached phone via a short cable, and the cable
has an uncanny physical resemblance to the one used on the Ericsson
DC23 GSM Card.
The product number on the card is FZ-2110A
and identifies itself as
"Modem" "CARD DNE 1141"
On the 2.2.7 PAO machine, the card is recognized as a 16550A based card,
with function ID 2.
On the 4.2 Release machine, it is recognized as a 16450 based card.
with function ID 2,
Otherwise, the card appears to probe and attach normally on both machines
with respect to /var/log/messages output.
cu(1) and terminal mode ppp(8) communicate with the card as expected
on the 2.2.7 machine, but the card does not respond to keyboard input
on the 4.2 machine.
The card is the only card present in either machine when use is attempted.
Any assistance in how to approach making this card work on the 4.2 Release
machine would be greatly appreciated. pccardd dumpcis follows from both
machines.
G.Boyd
VTA INC.
mobile@vta.com
################################################################################
4.2 Release:
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x15 (Version 1 info), length = 22
000: 04 01 4d 6f 64 65 6d 00 43 41 52 44 20 44 4e 45
010: 20 31 31 34 31 00
Version = 4.1, Manuf = [Modem], card vers = [CARD DNE 1141]
Addit. info = [],[]
Tuple #3, code = 0x1a (Configuration map), length = 5
000: 01 24 00 01 03
Reg len = 2, config register addr = 0x100, last config = 0x24
Registers: XX------
Tuple #4, code = 0x1b (Configuration entry), length = 16
000: e0 01 99 50 f5 50 05 aa 60 f8 03 07 70 bc 9e 60
Config index = 0x20(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Max current average over 1 second: 8 x 10mA, ext = 0x50
Power down supply current: 1 x 10mA
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3f8 block length = 0x8
IRQ modes: Level, Pulse
IRQs: 2 3 4 5 7 9 10 11 12 15
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #5, code = 0x1b (Configuration entry), length = 7
000: 21 08 aa 60 f8 02 07
Config index = 0x21
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2f8 block length = 0x8
Tuple #6, code = 0x1b (Configuration entry), length = 7
000: 22 08 aa 60 e8 03 07
Config index = 0x22
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3e8 block length = 0x8
Tuple #7, code = 0x1b (Configuration entry), length = 7
000: 23 08 aa 60 e8 02 07
Config index = 0x23
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2e8 block length = 0x8
Tuple #8, code = 0x1b (Configuration entry), length = 5
000: 24 08 a0 40 07
Config index = 0x24
Card provides address decode, 8 Bit I/O only
I/O address # 1: block length = 0x8
Tuple #9, code = 0x21 (Functional ID), length = 2
000: 02 01
Serial port/modem - POST initialize
Tuple #10, code = 0x14 (No link), length = 0
Tuple #11, code = 0xff (Terminator), length = 0
2 slots found
################################################################################
FreeBSD 2.2.7 :
Code 77 not found
Code 77 not found
code Unknown ignored
Code 190 not found
Code 190 not found
code Unknown ignored
Code 77 not found
Code 77 not found
code Unknown ignored
Code 190 not found
Code 190 not found
code Unknown ignored
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #3, code = 0x0 (Null tuple), length = 111
000: 64 65 4d 6f 64 65 52 44 20 44 52 44 20 44 31 34
010: 31 00 31 34 31 00 00 01 03 1b 00 01 03 1b 50 f5
020: 50 05 50 f5 50 05 07 70 bc 9e 07 70 bc 9e 08 aa
030: 60 f8 08 aa 60 f8 22 08 aa 60 22 08 aa 60 07 23
040: 08 aa 07 23 08 aa 1b 05 24 08 1b 05 24 08 02 02
050: 01 14 02 02 01 14 00 00 00 00 00 00 00 00 00 00
060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe
Tuple #4, code = 0x0 (Null tuple), length = 250
000: ba fe be fa ba 63 20 0f 00 63 20 0f 00 00 00 00
010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0f0: 00 00 00 00 00 00 00 00 00 00
Tuple #5, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #6, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #7, code = 0x0 (Null tuple), length = 111
000: 64 65 4d 6f 64 65 52 44 20 44 52 44 20 44 31 34
010: 31 00 31 34 31 00 00 01 03 1b 00 01 03 1b 50 f5
020: 50 05 50 f5 50 05 07 70 bc 9e 07 70 bc 9e 08 aa
030: 60 f8 08 aa 60 f8 22 08 aa 60 22 08 aa 60 07 23
040: 08 aa 07 23 08 aa 1b 05 24 08 1b 05 24 08 02 02
050: 01 14 02 02 01 14 00 00 00 00 00 00 00 00 00 00
060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe
Tuple #8, code = 0x0 (Null tuple), length = 250
000: ba fe be fa ba 63 20 0f 00 63 20 0f 00 00 00 00
010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0f0: 00 00 00 00 00 00 00 00 00 00
2 slots found
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200104022005.QAA05397>