Date: Wed, 14 Nov 2001 13:38:07 -0500 From: Mike Tancsa <mike@sentex.net> To: "Ilya" <mail@krel.org>, <freebsd-stable@FreeBSD.ORG> Subject: Re: fxp full duplex problem after upgrade from 4.4 stable to release Message-ID: <5.1.0.14.0.20011114133727.02b4ba70@marble.sentex.ca> In-Reply-To: <01fd01c16d3a$3c59bf90$0100a8c0@ilya> References: <3BF2B4B1.2DA9A2F1@d2.com>
next in thread | previous in thread | raw e-mail | index | archive | help
If you type
ifconfig fxp0 media autoselect
and then
ifconfig fxp0
what does it show for the media type ?
---Mike
At 01:29 PM 11/14/01 -0500, Ilya wrote:
>my fxp interface can no longer negotiate Full-Duplex with the switch.
>Everything worked fine with Stable. I have these lines in rc.conf:
>
>ifconfig_fxp0="inet 192.168.0.3 netmask 255.255.255.0 media 100baseTX
>mediaopt full-duplex"
>
>so i set full-duplex manually not through auto.
>
>this is from first dmesg after first reboot after upgrade:
>Nov 14 01:57:25 alchemistry fxp0: <Intel Pro 10/100B/100+ Ethernet> port
>0xef00-0xef3f mem 0xfebc000
>0-0xfebdffff,0xfebfe000-0xfebfefff irq 15 at device 15.0 on pci0
>Nov 14 01:57:25 alchemistry fxp0: *** DISABLING DYNAMIC STANDBY MODE IN
>EEPROM ***
>Nov 14 01:57:25 alchemistry fxp0: New EEPROM ID: 0x50a0
>Nov 14 01:57:25 alchemistry fxp0: EEPROM checksum @ 0x3f: 0x9b8b -> 0x9b8d
>Nov 14 01:57:25 alchemistry fxp0: *** PLEASE REBOOT THE SYSTEM NOW FOR
>CORRECT OPERATION ***
>Nov 14 01:57:25 alchemistry fxp0: Ethernet address 00:02:b3:27:60:7a
>Nov 14 01:57:25 alchemistry inphy0: <i82555 10/100 media interface> on
>miibus0
>Nov 14 01:57:25 alchemistry inphy0: 10baseT, 10baseT-FDX, 100baseTX,
>100baseTX-FDX, auto
>
>once rebooted this came up in dmesg:
>Nov 14 02:02:38 alchemistry fxp0: <Intel Pro 10/100B/100+ Ethernet> port
>0xef00-0xef3f mem 0xfebc000
>0-0xfebdffff,0xfebfe000-0xfebfefff irq 15 at device 15.0 on pci0
>Nov 14 02:02:38 alchemistry fxp0: Ethernet address 00:02:b3:27:60:7a
>Nov 14 02:02:38 alchemistry inphy0: <i82555 10/100 media interface> on
>miibus0
>Nov 14 02:02:38 alchemistry inphy0: 10baseT, 10baseT-FDX, 100baseTX,
>100baseTX-FDX, auto
>
>any suggestions?
>FreeBSD alchemistry.net 4.4-STABLE FreeBSD 4.4-STABLE #0: Wed Nov 14
>01:32:12 EST 2001 root@alchemistry.net:/usr/obj/usr/src/sys/ALCHEMISTRY
>i386
>
>
>To Unsubscribe: send mail to majordomo@FreeBSD.org
>with "unsubscribe freebsd-stable" in the body of the message
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.0.14.0.20011114133727.02b4ba70>