Date: Wed, 23 Mar 2005 15:25:04 +0000 From: haad <haaaad@gmail.com> To: freebsd-hackers@freebsd.org Subject: DMA TIMEOUT PROBLEM Message-ID: <42418A50.9030504@gmail.com>
next in thread | raw e-mail | index | archive | help
Hi,
This is pretty basic question which has been allready discused here but
i can't find answer .On my workstation i use linux and freebsd linux
works fine without any errors but freebsd shhows numerous errors and i
don't know what to do.
I test freebsd 5.2.1-released ,5.3 released then 5.4-beta1-released in
all releases i got these error messages which crashes my system down
with kernel panic
Mar 23 11:02:48 windoze kernel: ad4: TIMEOUT - WRITE_DMA retrying (2
retries left) LBA=139842480
Mar 23 11:02:48 windoze kernel: ata2: reiniting channel ..
Mar 23 11:02:49 windoze kernel: ata2: reset tp1 mask=01 ostat0=50 ostat1=00
Mar 23 11:02:49 windoze kernel: ad4: stat=0x50 err=0x01 lsb=0x00 msb=0x00
Mar 23 11:02:49 windoze kernel: ata2: reset tp2 stat0=50 stat1=00
devices=0x1<ATA_MASTER>
Mar 23 11:02:49 windoze kernel: ata2: resetting done ..
Mar 23 11:02:49 windoze kernel: ad4: pio=0x0c wdma=0x22 udma=0x46
cable=40pin
Mar 23 11:02:49 windoze kernel: ata2: device config done ..
Mar 23 11:02:49 windoze kernel: ad4: FAILURE - WRITE_DMA timed out
Mar 23 11:02:57 windoze kernel: ad4: TIMEOUT - WRITE_DMA retrying (2
retries left) LBA=144372332
Mar 23 11:02:57 windoze kernel: ata2: reiniting channel ..
Mar 23 11:02:58 windoze kernel: ata2: reset tp1 mask=01 ostat0=50 ostat1=00
Mar 23 11:02:58 windoze kernel: ad4: stat=0x50 err=0x01 lsb=0x00 msb=0x00
Mar 23 11:02:58 windoze kernel: ata2: reset tp2 stat0=50 stat1=00
devices=0x1<ATA_MASTER>
Mar 23 11:02:58 windoze kernel: ata2: resetting done ..
Mar 23 11:02:58 windoze kernel: ad4: pio=0x0c wdma=0x22 udma=0x46
cable=40pin
Mar 23 11:02:58 windoze kernel: ata2: device config done ..
Mar 23 11:02:58 windoze kernel: ad4: FAILURE - WRITE_DMA timed out
Mar 23 11:02:59 windoze kernel: initiate_write_filepage: already started
dmesg :
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-BETA1 #0: Fri Mar 18 09:28:57 UTC 2005
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a33000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a33200.
Calibrating clock(s) ... i8254 clock: 1193190 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 300684648 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (300.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 402587648 (383 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x00000000178fffff, 382578688 bytes (93403 pages)
avail memory = 384266240 (366 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fabc0
bios32: Entry = 0xfb030 (c00fb030) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb060
pnpbios: Found PnP BIOS data at 0xc00fbcf0
pnpbios: Entry = f0000:bd20 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <QDIGRP AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00fdbc0
PCI-Only Interrupts: 5 10 11
Location Bus Device Pin Link IRQs
slot 1 0 8 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 D 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 10 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 3 0 10 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 3 0 10 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 10 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 A 0x05 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 D 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 D 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15
embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
ACPI timer: 0/3 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 9
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x4010
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.8.0
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.8.1
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.8.2
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.8.3
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.9.0
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.9.1
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.9.2
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.9.3
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.10.0
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.10.1
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.10.2
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.10.3
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.11.0
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.11.1
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.11.2
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.11.3
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.13.0
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.13.1
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.13.2
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.13.3
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.7.0
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.7.1
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.7.2
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.7.3
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.1.1
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.1.2
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.1.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base d0000000, size 27, enabled
found-> vendor=0x1106, dev=0x0691, revid=0xc4
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x8598, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x0686, revid=0x41
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000c000, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000c400, size 5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.LNKD)
pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKA (references 7, priority 145351):
interrupts: 10 5 11 12 7 6 4 3
15 14 1
penalty: 280 330 560 5280 5280 5280 5280 5280 50280
50280100280
\\_SB_.PCI0.LNKB (references 7, priority 145351):
interrupts: 10 5 11 12 7 6 4 3
15 14 1
penalty: 280 330 560 5280 5280 5280 5280 5280 50280
50280100280
\\_SB_.PCI0.LNKC (references 7, priority 145351):
interrupts: 10 5 11 12 7 6 4 3
15 14 1
penalty: 280 330 560 5280 5280 5280 5280 5280 50280
50280100280
\\_SB_.PCI0.LNKD (references 7, priority 145351):
interrupts: 10 5 11 12 7 6 4 3
15 14 1
penalty: 280 330 560 5280 5280 5280 5280 5280 50280
50280100280
pcib0: slot 7 INTD routed to irq 10 via \\_SB_.PCI0.LNKD
found-> vendor=0x1106, dev=0x3038, revid=0x16
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000c800, size 5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.LNKD)
pcib0: slot 7 INTD is already routed to irq 10
found-> vendor=0x1106, dev=0x3038, revid=0x16
bus=0, slot=7, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3057, revid=0x40
bus=0, slot=7, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000cc00, size 3, enabled
map[14]: type 4, range 32, base 0000d000, size 2, enabled
map[18]: type 4, range 32, base 0000d400, size 3, enabled
map[1c]: type 4, range 32, base 0000d800, size 2, enabled
map[20]: type 4, range 32, base 0000dc00, size 4, enabled
map[24]: type 1, range 32, base dd000000, size 9, enabled
pcib0: matched entry for 0.9.INTA (src \\_SB_.PCI0.LNKB)
pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKA (references 7, priority 147534):
interrupts: 5 10 11 12 7 6 4 3
15 14 1
penalty: 610 630 1120 5560 5560 5560 5560 5560 50560
50560100560
\\_SB_.PCI0.LNKB (references 7, priority 147534):
interrupts: 5 10 11 12 7 6 4 3
15 14 1
penalty: 610 630 1120 5560 5560 5560 5560 5560 50560
50560100560
\\_SB_.PCI0.LNKC (references 7, priority 147534):
interrupts: 5 10 11 12 7 6 4 3
15 14 1
penalty: 610 630 1120 5560 5560 5560 5560 5560 50560
50560100560
pcib0: slot 9 INTA routed to irq 11 via \\_SB_.PCI0.LNKB
found-> vendor=0x1095, dev=0x3112, revid=0x02
bus=0, slot=9, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e000, size 5, enabled
pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.LNKD)
pcib0: slot 11 INTA is already routed to irq 10
found-> vendor=0x10ec, dev=0x8029, revid=0x00
bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[10]: type 4, range 32, base 0000e400, size 6, enabled
pcib0: matched entry for 0.13.INTA (src \\_SB_.PCI0.LNKB)
pcib0: slot 13 INTA is already routed to irq 11
found-> vendor=0x1274, dev=0x5880, revid=0x02
bus=0, slot=13, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
intpin=a, irq=11
powerspec 1 supports D0 D2 D3 current D0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem
0xd0000000-0xd7ffffff at device 0.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xd0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xda000000-0xdbffffff
pcib1: prefetched decode 0xd8000000-0xd9ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base da000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xda000000-0xdaffffff
map[14]: type 3, range 32, base d8000000, size 25, enabled
pcib1: device (null) requested decoded memory range 0xd8000000-0xd9ffffff
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LNKA)
pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKA (references 7, priority 149717):
interrupts: 5 10 11 12 7 6 4 3
15 14 1
penalty: 890 910 1750 5840 5840 5840 5840 5840 50840
50840100840
\\_SB_.PCI0.LNKC (references 7, priority 149717):
interrupts: 5 10 11 12 7 6 4 3
15 14 1
penalty: 890 910 1750 5840 5840 5840 5840 5840 50840
50840100840
pcib0: slot 1 INTA routed to irq 5 via \\_SB_.PCI0.LNKA
pcib1: slot 0 INTA is routed to irq 5
found-> vendor=0x10de, dev=0x002d, revid=0x15
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=5
powerspec 1 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port
0xc000-0xc00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x01 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=10 stat1=01 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 10 at device
7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc400
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: vendor 0x1005 USB Flash Drive, rev 2.00/1.00, addr 2
umass0:0:0:-1: Attached to scbus0
uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 10 at device
7.3 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc800
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
atapci1: <SiI 3112 SATA150 controller> port
0xdc00-0xdc0f,0xd800-0xd803,0xd400-0xd407,0xd000-0xd003,0xcc00-0xcc07
mem 0xdd000000-0xdd0001ff irq 11 at device 9.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xdc00
atapci1: [MPSAFE]
atapci1: Reserved 0x200 bytes for rid 0x24 type 3 at 0xdd000000
ata2: channel #0 on atapci1
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: channel #1 on atapci1
ata3: reset tp1 mask=01 ostat0=7f ostat1=00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=ff stat1=00 devices=0x0
ata3: [MPSAFE]
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xe000-0xe01f irq 10 at
device 11.0 on pci0
ed0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xe000
ed0: [GIANT-LOCKED]
ed0: bpf attached
ed0: Ethernet address: 52:54:ab:56:f2:0e
ed0: if_start running deferred for Giant
ed0: type NE2000 (16 bit)
pci0: <multimedia, audio> at device 13.0 (no driver attached)
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model NetMouse/NetScroll Optical, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ed: ed0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd47ff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 300684648 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on VIA 82C686B chip
ad0: <ST320410A/3.34> ATA-6 disk at ata0-master
ad0: 19092MB (39102336 sectors), 38792 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, PIO4
ar: FreeBSD check1 failed
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on VIA 82C686B chip
ata1-master: setting UDMA33 on VIA 82C686B chip
acd0: <ASUS CRW-5232AS/1.03> CDRW drive at ata1 as master
acd0: read 8958KB/s (8958KB/s) write 8958KB/s (8958KB/s), 2048KB buffer,
UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ad4: <ST3120827AS/3.42> ATA-6 disk at ata2-master
ad4: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, SATA150
ar: LSI check1 failed
GEOM: new disk ad0
GEOM: new disk ad4
[0] f:80 typ:12 s(CHS):0/1/1 e(CHS):385/254/63 s:63 l:39102147
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 20020299264 end 20020331519
[0] f:00 typ:11 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:58605057
[1] f:00 typ:166 s(CHS):1023/0/1 e(CHS):1023/254/63 s:58605120 l:78140160
[2] f:80 typ:165 s(CHS):1023/0/1 e(CHS):1023/254/63 s:136745280 l:29318625
[3] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:166063905 l:68372640
GEOM: Configure ad4s1, start 32256 length 30005789184 end 30005821439
GEOM: Configure ad4s2, start 30005821440 length 40007761920 end 70013583359
GEOM: Configure ad4s3, start 70013583360 length 15011136000 end 85024719359
GEOM: Configure ad4s4, start 85024719360 length 35006791680 end 120031511039
[0] f:6b typ:101 s(CHS):372/117/51 e(CHS):367/32/52 s:1869511200 l:168654198
[1] f:00 typ:121 s(CHS):357/32/43 e(CHS):0/13/10 s:1330184192 l:538976288
[2] f:20 typ:83 s(CHS):345/32/19 e(CHS):324/77/19 s:538989391 l:1398362912
[3] f:7e typ:73 s(CHS):87/1/0 e(CHS):335/78/2 s:1394627663 l:21337
GEOM: Configure ad0s1s2, start 681054306304 length 275955859456 end
957010165759
[0] f:20 typ:32 s(CHS):356/97/46 e(CHS):357/116/40 s:1919950958 l:544437093
[1] f:61 typ:107 s(CHS):288/110/57 e(CHS):269/101/57 s:1330184202
l:538976288
[2] f:20 typ:83 s(CHS):345/32/19 e(CHS):324/77/19 s:538989391 l:1398362912
[3] f:80 typ:73 s(CHS):87/1/0 e(CHS):335/78/2 s:1394627663 l:21337
GEOM: Configure ad4s1s4, start 714049363456 length 10924544 end 714060287999
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure ad4s3a, start 0 length 268435456 end 268435455
GEOM: Configure ad4s3b, start 268435456 length 778870784 end 1047306239
GEOM: Configure ad4s3c, start 0 length 15011136000 end 15011135999
GEOM: Configure ad4s3d, start 1047306240 length 268435456 end 1315741695
GEOM: Configure ad4s3e, start 1315741696 length 268435456 end 1584177151
GEOM: Configure ad4s3f, start 1584177152 length 13426958848 end 15011135999
[0] f:80 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:112392
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:112455 l:996030
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s4s1, start 32256 length 57544704 end 57576959
GEOM: Configure ad4s4s2, start 57576960 length 509967360 end 567544319
MBREXT Slice 5 on ad4s4:
[0] f:80 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:112392
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:112455 l:996030
GEOM: Configure ad4s5, start 32256 length 57544704 end 57576959
MBREXT Slice 6 on ad4s4:
[0] f:00 typ:130 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:995967
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:1108485 l:3919860
GEOM: Configure ad4s6, start 57609216 length 509935104 end 567544319
MBREXT Slice 7 on ad4s4:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:3919797
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:5028345 l:63344295
GEOM: Configure ad4s7, start 567576576 length 2006936064 end 2574512639
MBREXT Slice 8 on ad4s4:
[0] f:00 typ:142 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:63344232
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s8, start 2574544896 length 32432246784 end 35006791679
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:130 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:995967
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:1108485 l:3919860
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s4s2s1, start 32256 length 509935104 end 509967359
GEOM: Configure ad4s4s2s2, start 567544320 length 2006968320 end 2574512639
MBREXT Slice 5 on ad4s4s2:
[0] f:00 typ:130 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:995967
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:1108485 l:3919860
GEOM: Configure ad4s4s5, start 32256 length 509935104 end 509967359
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <USB Flash Drive 2.03> Removable Direct Access SCSI-0 device
pass0: Serial Number \^_
pass0: 1.000MB/s transfers
GEOM: new disk da0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB Flash Drive 2.03> Removable Direct Access SCSI-0 device
da0: Serial Number \^_
da0: 1.000MB/s transfers
da0: 123MB (253949 512 byte sectors: 64H 32S/T 123C)
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
Mounting root from ufs:/dev/ad4s3a
WARNING: / was not properly dismounted
start_init: trying /sbin/init
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
pflog0: bpf attached
Linux ELF exec handler installed
Mar 23 11:44:30 windoze kernel: ad4: TIMEOUT - WRITE_DMA retrying (2
retries left) LBA=140737520
Mar 23 11:44:31 windoze kernel: ad4: FAILURE - WRITE_DMA timed out
Mar 23 11:44:37 windoze kernel: ad4: TIMEOUT - WRITE_DMA retrying (2
retries left) LBA=146626096
Mar 23 11:44:38 windoze kernel: ad4: FAILURE - WRITE_DMA timed out
Mar 23 11:44:46 windoze kernel: ad4: TIMEOUT - WRITE_DMA retrying (2
retries left) LBA=150765968
Mar 23 11:44:47 windoze kernel: ad4: FAILURE - WRITE_DMA timed out
Mar 23 11:44:54 windoze kernel: ad4: TIMEOUT - WRITE_DMA retrying (2
retries left) LBA=144745840
Mar 23 11:44:55 windoze kernel: ad4: FAILURE - WRITE_DMA timed out
Mar 23 11:44:56 windoze fsck: /dev/ad4s3f: SIZE=127 MTIME=Jun 30 22:06
2004 (CLEARED)
Mar 23 11:44:56 windoze fsck: /dev/ad4s3f: UNREF FILE I=71464
OWNER=root MODE=100644
Mar 23 11:44:56 windoze fsck: /dev/ad4s3f: SIZE=69 MTIME=Jun 30 22:06
2004 (CLEARED)
Mar 23 11:44:56 windoze fsck: /dev/ad4s3f: UNREF FILE I=71472
OWNER=root MODE=100644
Mar 23 11:44:56 windoze fsck: /dev/ad4s3f: SIZE=1629 MTIME=Jun 30 22:06
2004 (CLEARED)
Mar 23 11:44:56 windoze fsck: /dev/ad4s3f: UNREF FILE I=71479
OWNER=root MODE=100644
Mar 23 11:44:56 windoze fsck: /dev/ad4s3f: SIZE=17388 MTIME=Jun 30 22:06
2004 (CLEARED)
Mar 23 11:44:56 windoze fsck: /dev/ad4s3f: UNREF FILE I=71684
OWNER=root MODE=100644
Mar 23 11:44:56 windoze fsck: /dev/ad4s3f: SIZE=47 MTIME=Feb 9 19:44
2005 (CLEARED)
Mar 23 11:44:56 windoze fsck: /dev/ad4s3f: UNREF FILE I=71790
OWNER=root MODE=100644
Mar 23 11:44:56 windoze fsck: /dev/ad4s3f: SIZE=75 MTIME=Feb 9 19:44
2005 (CLEARED)
Mar 23 11:44:56 windoze fsck: /dev/ad4s3f: UNREF FILE I=71794
OWNER=root MODE=100644
Mar 23 11:44:56 windoze fsck: /dev/ad4s3f: SIZE=12 MTIME=Feb 9 19:44
2005 (CLEARED)
Mar 23 11:44:56 windoze fsck: /dev/ad4s3f: LINK COUNT FILE I=259381
OWNER=root MODE=100644
Mar 23 11:44:56 windoze fsck: /dev/ad4s3f: SIZE=41589 MTIME=Feb 1 00:26
2005 COUNT 2 SHOULD BE 1 (ADJUSTED)
Mar 23 11:44:56 windoze fsck: /dev/ad4s3f: LINK COUNT FILE I=259386
OWNER=root MODE=100644
Mar 23 11:44:56 windoze fsck: /dev/ad4s3f: SIZE=9452 MTIME=Feb 1 00:26
2005 COUNT 2 SHOULD BE 1 (ADJUSTED)
Mar 23 11:52:38 windoze kernel: ad4: TIMEOUT - WRITE_DMA retrying (2
retries left) LBA=139184240
Mar 23 11:52:40 windoze kernel: ad4: FAILURE - WRITE_DMA timed out
******* Working on device /dev/ad4 *******
parameters extracted from in-core disklabel are:
cylinders=232581 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=232581 heads=16 sectors/track=63 (1008 blks/cyl)
fdisk ad4:
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 11 (0x0b),(DOS or Windows 95 with 32 bit FAT)
start 63, size 58605057 (28615 Meg), flag 0
beg: cyl 0/ head 1/ sector 1;
end: cyl 1023/ head 254/ sector 63
The data for partition 2 is:
sysid 166 (0xa6),(OpenBSD)
start 58605120, size 78140160 (38154 Meg), flag 0
beg: cyl 1023/ head 0/ sector 1;
end: cyl 1023/ head 254/ sector 63
The data for partition 3 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 136745280, size 29318625 (14315 Meg), flag 80 (active)
beg: cyl 1023/ head 0/ sector 1;
end: cyl 1023/ head 254/ sector 63
The data for partition 4 is:
sysid 5 (0x05),(Extended DOS)
start 166063905, size 68372640 (33385 Meg), flag 0
beg: cyl 1023/ head 0/ sector 1;
end: cyl 1023/ head 254/ sector 63
atacontrol info:
ATA channel 0:
Master: ad0 <ST320410A/3.34> ATA/ATAPI revision 6
Slave: no device present
ATA channel 1:
Master: acd0 <ASUS CRW-5232AS/1.03> ATA/ATAPI revision 0
Slave: no device present
ATA channel 2:
Master: ad4 <ST3120827AS/3.42> Serial ATA v1.0
Slave: no device present
ATA channel 3:
Master: no device present
Slave: no device present
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42418A50.9030504>