Date: Sat, 21 Oct 2006 12:20:24 -0500 From: Dan Olson <danolson@visi.com> To: freebsd-smp@freebsd.org Subject: Turion X2 Laptop SMP Problem Message-ID: <453A56D8.8020402@visi.com>
next in thread | raw e-mail | index | archive | help
Hello All I just bought a HP dv6119us Turion X2 laptop and can't seem to get it to do SMP. To get it to boot I have to add to the boot prompt or loader.conf set hint.apic.0.disabled=1 set hint.sio.0.disabled=1 set hint.sio.1.disabled=1 When booting with apic enabled the system slows to a crawl and the keyboard input is slow. To slow to register key events or log in. Below is a verbose dmesg with apic disabled on 6.2 beta2. Does anyone have any suggestions on getting SMP to work or diagnosing the problem? I've seen another complaint from July 06 but no resolution. http://lists.freebsd.org/pipermail/freebsd-amd64/2006-July/008508.html I'm working on submitting a PR for this. Thanks Dan Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-BETA2 #0: Mon Oct 2 03:32:44 UTC 2006 root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b5e000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b5e1d0. Calibrating clock(s) ... i8254 clock: 1193271 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1607325394 Hz CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50 (1607.33-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x40f82 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8> HTT bit cleared - FreeBSD does not have licensing issues requiring it. Cores per package: 2 Data TLB: 32 entries, fully associative Instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 1039138816 (991 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c28000 - 0x000000003cd4bfff, 1007828992 bytes (246052 pages) avail memory = 1007636480 (960 MB) bios32: Found BIOS32 Service Directory header at 0xc00f8a10 bios32: Entry = 0xfdcf4 (c00fdcf4) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfdcf0+0x0 pnpbios: Found PnP BIOS data at 0xc00f8a60 pnpbios: Entry = e768:9621 Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Oct 2 2006 03:32:34) npx0: INT 16 interface acpi0: <HP RSDT> on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80007004 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=050000] [hdr=80] is there (id=02f010de) pcibios: BIOS_PRESENT call failed acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 10 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xd89c8000 pa 0x9b000 atpic: Programming IRQ9 as level/low acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 10 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 10 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 10 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 10 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 10 func 1 ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 14 15 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 14 15 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 14 15 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 14 15 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 14 15 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 14 15 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link8: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 5 7 9 10 11 14 15 pci_link8: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 5 7 9 10 11 14 15 pci_link8: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link9: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 5 7 9 10 11 14 15 pci_link9: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 5 7 9 10 11 14 15 pci_link9: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link10: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 14 15 pci_link10: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 14 15 pci_link10: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link11: Links after initial probe: Index IRQ Rtd Ref IRQs 0 7 N 0 5 7 9 10 11 14 15 pci_link11: Links after initial validation: Index IRQ Rtd Ref IRQs 0 7 N 0 5 7 9 10 11 14 15 pci_link11: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link12: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 5 7 9 10 11 14 15 pci_link12: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 5 7 9 10 11 14 15 pci_link12: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link13: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link13: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link13: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link14: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link14: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link14: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link15: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link15: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link15: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link16: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link16: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link16: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link17: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 5 7 9 10 11 14 15 pci_link17: Links after initial validation: Index IRQ Rtd Ref IRQs 0 5 N 0 5 7 9 10 11 14 15 pci_link17: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 pci_link18: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 5 7 9 10 11 14 15 pci_link18: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 5 7 9 10 11 14 15 pci_link18: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 14 15 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.10.INTA at func 1: 10 ACPI: Found matching pin for 0.10.INTB at func 3: 10 ACPI: Found matching pin for 0.11.INTA at func 0: 11 ACPI: Found matching pin for 0.11.INTB at func 1: 7 ACPI: Found matching pin for 0.20.INTA at func 0: 10 ACPI: Found matching pin for 0.16.INTB at func 1: 11 ACPI: Found matching pin for 0.14.INTA at func 0: 5 ACPI: Found matching pin for 0.5.INTA at func 0: 11 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x10de, dev=0x02f0, revid=0xa2 bus=0, slot=0, func=0 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02fa, revid=0xa2 bus=0, slot=0, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0100, statreg=0x4020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02fe, revid=0xa2 bus=0, slot=0, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02f8, revid=0xa2 bus=0, slot=0, func=3 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02f9, revid=0xa2 bus=0, slot=0, func=4 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02ff, revid=0xa2 bus=0, slot=0, func=5 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x027f, revid=0xa2 bus=0, slot=0, func=6 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0100, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x027e, revid=0xa2 bus=0, slot=0, func=7 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02fc, revid=0xa1 bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02fd, revid=0xa1 bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0244, revid=0xa2 bus=0, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base b2000000, size 24, enabled map[14]: type 3, range 64, base c0000000, size 28, enabled map[1c]: type 1, range 64, base b1000000, size 24, enabled pcib0: matched entry for 0.5.INTA (src \\_SB_.PCI0.LK3E:0) pcib0: slot 5 INTA routed to irq 11 via \\_SB_.PCI0.LK3E found-> vendor=0x10de, dev=0x0270, revid=0xa2 bus=0, slot=9, func=0 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0260, revid=0xa3 bus=0, slot=10, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 00001d00, size 7, enabled found-> vendor=0x10de, dev=0x0264, revid=0xa3 bus=0, slot=10, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00003040, size 6, enabled map[24]: type 4, range 32, base 00003000, size 6, enabled pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.LSMB:0) pcib0: slot 10 INTA routed to irq 10 via \\_SB_.PCI0.LSMB found-> vendor=0x10de, dev=0x0271, revid=0xa3 bus=0, slot=10, func=3 class=0b-40-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=10 map[10]: type 1, range 32, base b0040000, size 18, enabled pcib0: matched entry for 0.10.INTB (src \\_SB_.PCI0.LPMU:0) pcib0: slot 10 INTB routed to irq 10 via \\_SB_.PCI0.LPMU found-> vendor=0x10de, dev=0x026d, revid=0xa3 bus=0, slot=11, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b0004000, size 12, enabled pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.LUS0:0) pcib0: slot 11 INTA routed to irq 11 via \\_SB_.PCI0.LUS0 found-> vendor=0x10de, dev=0x026e, revid=0xa3 bus=0, slot=11, func=1 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=7 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b0005000, size 8, enabled pcib0: matched entry for 0.11.INTB (src \\_SB_.PCI0.LUS2:0) pcib0: slot 11 INTB routed to irq 7 via \\_SB_.PCI0.LUS2 found-> vendor=0x10de, dev=0x0265, revid=0xf1 bus=0, slot=13, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00003080, size 4, enabled found-> vendor=0x10de, dev=0x0266, revid=0xf1 bus=0, slot=14, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type 4, range 32, base 000030c0, size 3, enabled map[14]: type 4, range 32, base 000030b4, size 2, enabled map[18]: type 4, range 32, base 000030b8, size 3, enabled map[1c]: type 4, range 32, base 000030b0, size 2, enabled map[20]: type 4, range 32, base 00003090, size 4, enabled map[24]: type 1, range 32, base b0006000, size 12, memory disabled pcib0: matched entry for 0.14.INTA (src \\_SB_.PCI0.LTID:0) pcib0: slot 14 INTA routed to irq 5 via \\_SB_.PCI0.LTID found-> vendor=0x10de, dev=0x026f, revid=0xa2 bus=0, slot=16, func=0 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns) found-> vendor=0x10de, dev=0x026c, revid=0xa2 bus=0, slot=16, func=1 class=04-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit, vector masks map[10]: type 1, range 32, base b0000000, size 14, enabled pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.LAZA:0) pcib0: slot 16 INTB routed to irq 11 via \\_SB_.PCI0.LAZA found-> vendor=0x10de, dev=0x0269, revid=0xa3 bus=0, slot=20, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b0008000, size 12, enabled map[14]: type 4, range 32, base 000030e0, size 3, enabled pcib0: matched entry for 0.20.INTA (src \\_SB_.PCI0.LMAC:0) pcib0: slot 20 INTA routed to irq 10 via \\_SB_.PCI0.LMAC found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0: <memory, RAM> at device 0.0 (no driver attached) pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x4000-0x4fff pcib1: memory decode 0xb3000000-0xb31fffff pcib1: prefetched decode 0xd0000000-0xd01fffff pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pcib2: secondary bus 3 pcib2: subordinate bus 3 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xb3200000-0xb33fffff pcib2: prefetched decode 0xfff00000-0xfffff ACPI: Found matching pin for 3.0.INTA at func 0: 255 pci3: <ACPI PCI bus> on pcib2 pci3: physical bus=3 found-> vendor=0x14e4, dev=0x4311, revid=0x01 bus=3, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message map[10]: type 1, range 32, base b3200000, size 14, enabled pcib2: (null) requested memory range 0xb3200000-0xb3203fff: good pci3: <network> at device 0.0 (no driver attached) pci0: <display, VGA> at device 5.0 (no driver attached) pci0: <memory, RAM> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> port 0x1d00-0x1d7f at device 10.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 10.1 (no driver attached) pci0: <processor> at device 10.3 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xb0004000-0xb0004fff irq 11 at device 11.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0004000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 8 ports with 8 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xb0005000-0xb00050ff irq 7 at device 11.1 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xb0005000 ehci0: [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 8 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 8 ports with 8 removable, self powered atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3080-0x308f at device 13.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3080 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x30c0-0x30c7,0x30b4-0x30b7,0x30b8-0x30bf,0x30b0-0x30b3,0x3090-0x309f mem 0xb0006000-0xb0006fff irq 5 at device 14.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3090 atapci1: [MPSAFE] atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xb0006000 ata2: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x30c0 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x30b4 ata2: SATA connect ready time=0ms ata2: sata_connect devices=0x1<ATA_MASTER> ata2: [MPSAFE] ata3: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x30b8 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x30b0 ata3: SATA connect status=00000000 ata3: [MPSAFE] pcib3: <ACPI PCI-PCI bridge> at device 16.0 on pci0 pcib3: secondary bus 7 pcib3: subordinate bus 7 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xb3400000-0xb34fffff pcib3: prefetched decode 0xfff00000-0xfffff pcib3: Subtractively decoded bridge. ACPI: Found matching pin for 7.5.INTA at func 0: 11 ACPI: Found matching pin for 7.5.INTB at func 1: 11 pci7: <ACPI PCI bus> on pcib3 pci7: physical bus=7 found-> vendor=0x1180, dev=0x0832, revid=0x00 bus=7, slot=5, func=0 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b3400000, size 11, enabled pcib3: (null) requested memory range 0xb3400000-0xb34007ff: good pcib3: matched entry for 7.5.INTA (src \\_SB_.PCI0.LNK1:0) pcib3: slot 5 INTA routed to irq 11 via \\_SB_.PCI0.LNK1 found-> vendor=0x1180, dev=0x0822, revid=0x19 bus=7, slot=5, func=1 class=08-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b3400800, size 8, enabled pcib3: (null) requested memory range 0xb3400800-0xb34008ff: good pcib3: matched entry for 7.5.INTB (src \\_SB_.PCI0.LNK2:0) pcib3: slot 5 INTB routed to irq 11 via \\_SB_.PCI0.LNK2 found-> vendor=0x1180, dev=0x0843, revid=0x01 bus=7, slot=5, func=2 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b3400c00, size 8, enabled pcib3: (null) requested memory range 0xb3400c00-0xb3400cff: good pcib3: matched entry for 7.5.INTB (src \\_SB_.PCI0.LNK2:0) pcib3: slot 5 INTB routed to irq 11 via \\_SB_.PCI0.LNK2 found-> vendor=0x1180, dev=0x0592, revid=0x0a bus=7, slot=5, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0102, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b3401000, size 8, enabled pcib3: (null) requested memory range 0xb3401000-0xb34010ff: good pcib3: matched entry for 7.5.INTB (src \\_SB_.PCI0.LNK2:0) pcib3: slot 5 INTB routed to irq 11 via \\_SB_.PCI0.LNK2 found-> vendor=0x1180, dev=0x0852, revid=0x05 bus=7, slot=5, func=4 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0102, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b3401400, size 8, enabled pcib3: (null) requested memory range 0xb3401400-0xb34014ff: good pcib3: matched entry for 7.5.INTB (src \\_SB_.PCI0.LNK2:0) pcib3: slot 5 INTB routed to irq 11 via \\_SB_.PCI0.LNK2 fwohci0: vendor=1180, dev=832 fwohci0: vendor=1180, dev=832 fwohci0: <1394 Open Host Controller Interface> mem 0xb3400000-0xb34007ff irq 11 at device 5.0 on pci7 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xb3400000 fwohci0: [MPSAFE] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:9f:c0:00:94:9a:b8:00 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:9f:c0:9a:b8:00 fwe0: bpf attached fwe0: Ethernet address: 02:9f:c0:9a:b8:00 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci7: <base peripheral> at device 5.1 (no driver attached) pci7: <base peripheral> at device 5.2 (no driver attached) pci7: <base peripheral> at device 5.3 (no driver attached) pci7: <base peripheral> at device 5.4 (no driver attached) pci0: <multimedia> at device 16.1 (no driver attached) nve0: <NVIDIA nForce MCP13 Networking Adapter> port 0x30e0-0x30e7 mem 0xb0008000-0xb0008fff irq 10 at device 20.0 on pci0 nve0: nvenetlib.o version 1.0-13 nve0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0008000 nve0: Ethernet address 00:16:36:8c:50:85 miibus0: <MII bus> on nve0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nve0: bpf attached nve0: Ethernet address: 00:16:36:8c:50:85 nve0: [MPSAFE] acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xcf800-0xd0fff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: not probed (disabled) sio1: not probed (disabled) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1607325394 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: no controller detected. acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization start ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire acd0: setting PIO4 on nForce MCP51 chip acd0: <HL-DT-ST DVDRAM GSA-4084N/KQ09> DVDR drive at ata0 as master acd0: read 4134KB/s (4134KB/s) write 689KB/s (689KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-RW 120mm data disc ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ad4: 76319MB <FUJITSU MHV2080BH PL 892C> at ata2-master SATA150 ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue ad4: nVidia check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed battery0: battery initialization done, tried 1 times (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error ATA PseudoRAID loaded GEOM: new disk ad4 Trying to mount root from ufs:/dev/ad4s2a start_init: trying /sbin/init Linux ELF exec handler installed splash: image decoder found: blank_saver
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?453A56D8.8020402>