Date: Tue, 20 Mar 2007 21:38:38 +1100 From: Nick Withers <nick@nickwithers.com> To: Jean-Yves Lefort <jylefort@FreeBSD.org> Cc: freebsd-gnome@freebsd.org, manphiz@gmail.com Subject: Re: Possible missing file in hal installation Message-ID: <20070320213838.dbef0f41.nick@nickwithers.com> In-Reply-To: <20070320063524.421ad658.jylefort@FreeBSD.org> References: <20070319205346.e5e46409.nick@nickwithers.com> <20070320063524.421ad658.jylefort@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 20 Mar 2007 06:35:24 +0100 Jean-Yves Lefort <jylefort@FreeBSD.org> wrote: > On Mon, 19 Mar 2007 20:53:46 +1100 > Nick Withers <nick@nickwithers.com> wrote: > > > Firstly, I've just pasted the existing thread in from > > "http://lists.freebsd.org/pipermail/freebsd-gnome/2007-January/016501.html", > > sorry if I stuffed it up at all and my apologies to those with > > threaded mail clients... > > > > > On Wed, 2007-01-03 at 21:13 +0800, manphiz at gmail.com wrote: > > > > Joe Marcus Clarke wrote: > > > > > No, there is nothing useful here. The ktrace looks good. > > > > > The last thing hald does is read the PCI config registers > > > > > (part of the initial PCI bus probe). You need to get a > > > > > full backtrace from hald once it appears to lock up. To do > > > > > that, you should run hald manually, then use gdb to bind to > > > > > it once it's locked up. Then get a full backtrace. > > > > > > > > > > Joe > > > > > > > > > > > > > > Thanks a lot for the instruction! I attached to the > > > > deadlocked process, and get this backtrace: > > > > > > > > (gdb) bt > > > > #0 hf_pci_probe () at hf-pci.c:150 > > > > #1 0x0805ced7 in osspec_probe () at osspec.c:96 > > > > #2 0x080551dd in main (argc=3, argv=0xbfbfeb5c) at hald.c:578 > > > > > > This backtrace doesn't make sense. Line 150 of hf-pci.c is not > > > in hf_pci_probe(). The real line 150 represents a loop that > > > iterates through the devices list. This list must be finite. > > > I don't see how this problem could occur based on this > > > information. > > > > I appear to be in a similar scenario on my HP Compaq Presario > > B3820 (believe I'm using the latest firmware versions). > > (snip) > > If anyone's got an idea or two up their sleeves about how I might > > go about fixing this, I'd be very grateful to hear about it! > > Please install sysutils/pciutils and send me the output of "lspci > -v". With pleasure! ____ presario# lspci -v pcilib: Bus 02 seen twice (firmware bug). Ignored. 00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 21) Subsystem: Hewlett-Packard Company Unknown device 3089 Flags: bus master, fast devsel, latency 0 Memory at e0000000 (32-bit, prefetchable) Capabilities: [e4] Vendor Specific Information Capabilities: [a0] AGP version 2.0 00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 21) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, fast devsel, latency 96 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: d0100000-d01fffff Prefetchable memory behind bridge: d8000000-dfffffff 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 3089 Flags: bus master, medium devsel, latency 0, IRQ 9 I/O ports at 1800 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 3089 Flags: bus master, medium devsel, latency 0, IRQ 9 I/O ports at 1820 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device 3089 Flags: bus master, medium devsel, latency 0, IRQ 9 I/O ports at 1840 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Unknown device 3089 Flags: bus master, medium devsel, latency 0, IRQ 7 Memory at d0000000 (32-bit, non-prefetchable) Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 00004000-00004fff Memory behind bridge: d0200000-d02fffff 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03) Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Unknown device 3089 Flags: bus master, medium devsel, latency 0, IRQ 255 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at 1860 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03) Subsystem: Hewlett-Packard Company Unknown device 3089 Flags: medium devsel, IRQ 9 I/O ports at 1880 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03) Subsystem: Hewlett-Packard Company Unknown device 3089 Flags: bus master, medium devsel, latency 0, IRQ 9 I/O ports at 1c00 I/O ports at 18c0 Memory at d0000c00 (32-bit, non-prefetchable) Memory at d0000800 (32-bit, non-prefetchable) Capabilities: [50] Power Management version 2 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic]) Subsystem: Hewlett-Packard Company Unknown device 3089 Flags: bus master, medium devsel, latency 0, IRQ 9 I/O ports at 2400 I/O ports at 2000 Capabilities: [50] Power Management version 2 01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] (prog-if 00 [VGA]) Subsystem: Hewlett-Packard Company Unknown device 3089 Flags: bus master, fast Back2Back, 66MHz, medium devsel, latency 66, IRQ 9 Memory at d8000000 (32-bit, prefetchable) I/O ports at 3000 Memory at d0100000 (32-bit, non-prefetchable) Capabilities: [58] AGP version 2.0 Capabilities: [50] Power Management version 2 02:07.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9) Subsystem: Hewlett-Packard Company Unknown device 3089 Flags: bus master, medium devsel, latency 32, IRQ 9 Memory at d0202000 (32-bit, non-prefetchable) Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 16-bit legacy interface ports at 0001 02:07.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9) Subsystem: Hewlett-Packard Company Unknown device 3089 Flags: bus master, medium devsel, latency 32, IRQ 9 Memory at d0203000 (32-bit, non-prefetchable) Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 16-bit legacy interface ports at 0001 02:07.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 01) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Unknown device 3089 Flags: bus master, medium devsel, latency 64, IRQ 9 Memory at d0201000 (32-bit, non-prefetchable) Capabilities: [dc] Power Management version 2 02:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Hewlett-Packard Company Unknown device 3089 Flags: bus master, medium devsel, latency 64, IRQ 9 I/O ports at 4000 Memory at d0201800 (32-bit, non-prefetchable) Capabilities: [50] Power Management version 2 02:09.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05) Subsystem: Hewlett-Packard Company Unknown device 12f6 Flags: bus master, medium devsel, latency 64, IRQ 9 Memory at d0200000 (32-bit, non-prefetchable) Capabilities: [dc] Power Management version 2 ____ Also, since I forgot last time and in case it's useful, here's a dmesg: ____ Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE-p3 #0: Sun Mar 18 00:29:02 EST 2007 nick@presario.shmon.net:/usr/obj/usr/src/sys/PRESARIO Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.70GHz (1694.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6 Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> real memory = 536281088 (511 MB) avail memory = 514777088 (490 MB) kbd1 at kbdmux0 acpi0: <PTLTD CooperSp> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci_link0: BIOS IRQ 10 for 0.29.INTA is invalid pci_link3: BIOS IRQ 3 for 0.29.INTB is invalid pci_link2: BIOS IRQ 11 for 0.29.INTC is invalid pci_link1: BIOS IRQ 5 for 0.31.INTB is invalid pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82855 host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci_link0: BIOS IRQ 10 for 1.0.INTA is invalid pci1: <ACPI PCI bus> on pcib1 drm0: <ATI Radeon RV350 Mobility 9600 M10 NP> port 0x3000-0x30ff mem 0xd8000000-0xdfffffff,0xd0100000-0xd010ffff irq 9 at device 0.0 on pci1 info: [drm] AGP at 0xe0000000 256MB info: [drm] Initialized radeon 1.24.0 20060225 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 9 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xd0000000-0xd00003ff irq 7 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci_link2: BIOS IRQ 11 for 2.7.INTC is invalid pci_link1: BIOS IRQ 5 for 2.8.INTA is invalid pci_link2: BIOS IRQ 11 for 2.9.INTA is invalid pci2: <ACPI PCI bus> on pcib2 cbb0: <RF5C476 PCI-CardBus Bridge> at device 7.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <RF5C476 PCI-CardBus Bridge> at device 7.1 on pci2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 fwohci0: <Ricoh R5C552> mem 0xd0201000-0xd02017ff irq 9 at device 7.2 on pci2 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 10:cf:fd:00:00:13:93:66 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) rl0: <RealTek 8139 10/100BaseTX> port 0x4000-0x40ff mem 0xd0201800-0xd02018ff irq 9 at device 8.0 on pci2 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:13:21:10:b0:77 iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xd0200000-0xd0200fff irq 9 at device 9.0 on pci2 iwi0: Ethernet address: 00:0e:35:d6:8b:3f isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xd0000c00-0xd0000dff,0xd0000800-0xd00008ff irq 9 at device 31.5 on pci0 pcm0: <Analog Devices AD1981B AC97 Codec> pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xdf000-0xdffff,0xe0000-0xe3fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 2, iclass 3/1 kbd2 at ukbd0 uhid0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 2, iclass 3/1 ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/21.00, addr 2, iclass 3/1 ums0: 8 buttons and Z dir. Timecounter "TSC" frequency 1694511574 Hz quality 800 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging limited to 1000 packets/entry by default ad0: 57231MB <HTS548060M9AT00 MGBOA53A> at ata0-master UDMA100 cpu0: Cx states changed acd0: FAILURE - MODE_SENSE_BIG timed out acd0: DVDR <HL-DT-ST DVD-RW GWA-4080N/0G03> at ata1-master UDMA33 cd0 at ata1 bus 0 target 0 lun 0 cd0: <HL-DT-ST DVD-RW GWA-4080N 0G03> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: cd present [3474532 x 2048 byte records] Trying to mount root from ufs:/dev/ad0s1a ____ > -- > Jean-Yves Lefort > > jylefort@FreeBSD.org > http://lefort.be.eu.org/ Thanks for your time! -- Nick Withers email: nick@nickwithers.com Web: http://www.nickwithers.com Mobile: +61 414 397 446
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070320213838.dbef0f41.nick>