Date: Fri, 25 Nov 2005 15:25:58 +0100 From: Bruno Ducrot <ducrot@poupinou.org> To: Timm Florian Gloger <timm.gloger@gmail.com> Cc: freebsd-acpi@freebsd.org Subject: Re: System freezes when using ACPI Message-ID: <20051125142558.GB8628@poupinou.org> In-Reply-To: <19269e540511250555p18355d49u@mail.gmail.com> References: <19269e540511250555p18355d49u@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Nov 25, 2005 at 02:55:13PM +0100, Timm Florian Gloger wrote: > hey list, > > i installed a fresh 6.0 stable system on my machine. > > when using acpi the system freezes after less than 10 minutes. > with disabled acpi there is no such problem and the system runs fine. > > i am new to freebsd so i dont know all the things which may influence > the acpi driver to misbehave. > > i attached the outputs which are mentioned in the handbook. > > the system is: > > asus a7n8x deluxe rev 2.0 bios 1008 > amd athlon xp 3000+ fsb 400 > 1 gb ddr400 ram > nforce 2 chipset (firewire disabled) > sapphire radeon 9800 pro > > if there are any further information required to get the system work > properly ... Looks like when you enable ACPI then APIC will be used for interrupts whereas ATPIC will be used whithout ACPI. I guess the problem come from APIC, not ACPI (unless of course the configuration things coming from ACPI is wrong). -- Bruno Ducrot -- Which is worse: ignorance or apathy? -- Don't know. Don't care.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051125142558.GB8628>