Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 09 Apr 2009 19:22:27 +0200 (CEST)
From:      Alexander Best <alexbestms@math.uni-muenster.de>
To:        <freebsd-x11@freebsd.org>
Cc:        Robert Noland <rnoland@FreeBSD.org>
Subject:   Re: Using joypad under X
Message-ID:  <permail-20090409172227f0889e8400004852-a_best01@message-id.uni-muenster.de>
In-Reply-To: <1239294242.1922.14.camel@balrog.2hip.net>

next in thread | previous in thread | raw e-mail | index | archive | help
i recompiled my kernel with the usb1 stack, but it still doesn't work. i tried
recompiling x11-drivers/xf86-input-joystick, but got the following compile
errors:

backend_bsd.c: In function 'jstkOpenDevice_bsd':
backend_bsd.c:104: error: 'USB_GET_REPORT_ID' undeclared (first use in this
function)
backend_bsd.c:104: error: (Each undeclared identifier is reported only once
backend_bsd.c:104: error: for each function it appears in.)

since the X joystick driver is installed on my system i tried to start X to
see if it works with the usb1 stack, but without any success. this is the
debug output from Xorg0.log:

(**) Option "Device" "/dev/uhid0"
(**) Option "SendCoreEvents"
(**) Logitech Cordless RumblePad 2: always reports core events
(**) Option "DebugLevel" "99"
(**) Logitech Cordless RumblePad 2: debug level set to 99
(**) Button 1 mapped to 5
(**) Option "MapButton2" "button=1"
(**) Button 2 mapped to 5
(**) Option "MapButton3" "button=2"
(**) Button 3 mapped to 5
(**) Button 4 mapped to 0
(**) Button 5 mapped to 0
(**) Button 6 mapped to 0
(**) Button 7 mapped to 0
(**) Button 8 mapped to 0
(**) Button 9 mapped to 0
(**) Button 10 mapped to 0
(**) Button 11 mapped to 0
(**) Button 12 mapped to 0
(**) Button 13 mapped to 0
(**) Button 14 mapped to 0
(**) Button 15 mapped to 0
(**) Button 16 mapped to 0
(**) Button 17 mapped to 0
(**) Button 18 mapped to 0
(**) Button 19 mapped to 0
(**) Button 20 mapped to 0
(**) Button 21 mapped to 0
(**) Button 22 mapped to 0
(**) Button 23 mapped to 0
(**) Button 24 mapped to 0
(**) Button 25 mapped to 0
(**) Button 26 mapped to 0
(**) Button 27 mapped to 0
(**) Button 28 mapped to 0
(**) Button 29 mapped to 0
(**) Button 30 mapped to 0
(**) Button 31 mapped to 0
(**) Button 32 mapped to 0
(**) Option "MapAxis1" "mode=relative axis=+3x deadzone=30"
(**) Axis 1 type is 1, mapped to 1, amplify=3.000
(**) Option "MapAxis2" "mode=relative axis=+3y deadzone=30"
(**) Axis 2 type is 1, mapped to 2, amplify=3.000
(**) Axis 3 type is 1, mapped to 3, amplify=1.000
(**) Axis 4 type is 1, mapped to 4, amplify=1.000
(**) Axis 5 type is 2, mapped to 1, amplify=1.000
(**) Axis 6 type is 2, mapped to 2, amplify=1.000
(**) Axis 7 type is 0, mapped to 0, amplify=1.000
(**) Axis 8 type is 0, mapped to 0, amplify=1.000
(**) Axis 9 type is 0, mapped to 0, amplify=1.000
(**) Axis 10 type is 0, mapped to 0, amplify=1.000
(**) Axis 11 type is 0, mapped to 0, amplify=1.000
(**) Axis 12 type is 0, mapped to 0, amplify=1.000
(**) Axis 13 type is 0, mapped to 0, amplify=1.000
(**) Axis 14 type is 0, mapped to 0, amplify=1.000
(**) Axis 15 type is 0, mapped to 0, amplify=1.000
(**) Axis 16 type is 0, mapped to 0, amplify=1.000
(**) Axis 17 type is 0, mapped to 0, amplify=1.000
(**) Axis 18 type is 0, mapped to 0, amplify=1.000
(**) Axis 19 type is 0, mapped to 0, amplify=1.000
(**) Axis 20 type is 0, mapped to 0, amplify=1.000
(**) Axis 21 type is 0, mapped to 0, amplify=1.000
(**) Axis 22 type is 0, mapped to 0, amplify=1.000
(**) Axis 23 type is 0, mapped to 0, amplify=1.000
(**) Axis 24 type is 0, mapped to 0, amplify=1.000
(**) Axis 25 type is 0, mapped to 0, amplify=1.000
(**) Axis 26 type is 0, mapped to 0, amplify=1.000
(**) Axis 27 type is 0, mapped to 0, amplify=1.000
(**) Axis 28 type is 0, mapped to 0, amplify=1.000
(**) Axis 29 type is 0, mapped to 0, amplify=1.000
(**) Axis 30 type is 0, mapped to 0, amplify=1.000
(**) Axis 31 type is 0, mapped to 0, amplify=1.000
(**) Axis 32 type is 0, mapped to 0, amplify=1.000
(**) Option "SendCoreEvents"
(**) Logitech Cordless RumblePad 2 (keys): always reports core events
(II) evaluating device (Razer Diamondback 1600)
(II) XINPUT: Adding extended input device "Razer Diamondback 1600" (type:
MOUSE)
(II) evaluating device (Dell USB Keyboard)
(II) XINPUT: Adding extended input device "Dell USB Keyboard" (type: KEYBOARD)
(II) evaluating device (Logitech Cordless RumblePad 2)
(II) XINPUT: Adding extended input device "Logitech Cordless RumblePad 2"
(type: JOYSTICK)
(II) evaluating device (Logitech Cordless RumblePad 2 (keys))
(II) XINPUT: Adding extended input device "Logitech Cordless RumblePad 2
(keys)" (type: JOYSTICK)
jstkDeviceControlProc what=INIT
(EE) Joystick: hid_get_report_desc failed: Invalid argument
jstkKeyboardDeviceControlProc what=DEVICE_INIT
(**) Initializing Keyboard with 1 keys
(**) Keymap [8]: 0x00000000
(II) Razer Diamondback 1600: SetupAuto: hw.iftype is 4, hw.model is 0
(II) Razer Diamondback 1600: SetupAuto: protocol is SysMouse
jstkKeyboardDeviceControlProc what=DEVICE_ON
jstkKeyboardDeviceControlProc what=DEVICE_OFF
(II) NVIDIA(0): Setting mode "1152x864"
(**) Option "BaudRate" "1200"
(**) Option "StopBits" "2"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "0"
(**) Option "FlowControl" "None"
couldn't enable device 4
jstkKeyboardDeviceControlProc what=DEVICE_ON

i'm now recompiling my kernel with the usb2 stack and try to somehow make the
xf86-input-joystick port compile without any errors.

i also posted a thread describing my problem on the freebsd-questions
mailinglist. maybe somebody over there knows what to do. here's the thread:

http://lists.freebsd.org/pipermail/freebsd-questions/2009-April/196128.html

thanks for your help. :)

Alex

Robert Noland schrieb am 2009-04-09:
> On Thu, 2009-04-09 at 14:33 +0200, Alexander Best wrote:
> > oh. :-(

> > so basically there's no way to use my gamepad with the usb2 stack?
> > will the X
> > joystick driver work if i switch back to usb1?

> Well, I don't have any way to test it, but when I just updated X
> server,
> the joystick driver was one of two "maintained" drivers that failed.
> The error appeared to be related to usb2 as I do all of my builds on
> -CURRENT.  It probably isn't all that difficult to fix, but I don't
> know
> the usb stuff.

> robert.

> > Robert Noland schrieb am 2009-04-08:
> > > On Wed, 2009-04-08 at 21:13 +0200, Alexander Best wrote:
> > > > hi there,

> > > > i'm running FreeBSD moshnroll 8.0-CURRENT FreeBSD 8.0-CURRENT
> > > > #28
> > > > r190845: Wed
> > > > Apr  8 16:27:42 CEST 2009.

> > > > i'd like to use my joypad under X in order to play games, but
> > > > i'm
> > > > unable to
> > > > find any information on how to do this.

> > > I don't think that the joystick driver and usb2 get along...

> > > robert.

> > > > the device get's recognized as HID device. here's the line from
> > > > dmesg:

> > > > uhid0: <Logitech Logitech Cordless RumblePad 2, class 0/0, rev
> > > > 1.10/2.00, addr
> > > > 2> on usbus0

> > > > i added the following lines to my xorg.conf:

> > > > Section "InputDevice"
> > > >     Identifier     "Logitech Cordless RumblePad 2"
> > > >     Option         "Vendor" "Logitech"
> > > >     Driver         "joystick"
> > > >     Option         "Path" "/dev/uhid0"
> > > >     Option         "Device" "/dev/uhid0"
> > > >     Option         "DebugLevel" "99"
> > > > EndSection

> > > > and added

> > > > InputDevice "Logitech Cordless RumblePad 2" "SendCoreEvents" to

> > > > Section "ServerLayout"

> > > > after starting X however i'm not able to use the joypad. i
> > > > checked
> > > > /var/log/Xorg.0.log and found these entries which seem to be
> > > > related to the
> > > > problem:

> > > > (**) Option "Device" "/dev/uhid0"
> > > > (**) Option "SendCoreEvents"
> > > > (**) Logitech Cordless RumblePad 2: always reports core events
> > > > (**) Option "DebugLevel" "99"
> > > > (**) Logitech Cordless RumblePad 2: debug level set to 99
> > > > (**) Button 1 mapped to 5
> > > > (**) Button 2 mapped to 5
> > > > (**) Button 3 mapped to 5
> > > > (**) Button 4 mapped to 0
> > > > (**) Button 5 mapped to 0
> > > > (**) Button 6 mapped to 0
> > > > (**) Button 7 mapped to 0
> > > > (**) Button 8 mapped to 0
> > > > (**) Button 9 mapped to 0
> > > > (**) Button 10 mapped to 0
> > > > (**) Button 11 mapped to 0
> > > > (**) Button 12 mapped to 0
> > > > (**) Button 13 mapped to 0
> > > > (**) Button 14 mapped to 0
> > > > (**) Button 15 mapped to 0
> > > > (**) Button 16 mapped to 0
> > > > (**) Button 17 mapped to 0
> > > > (**) Button 18 mapped to 0
> > > > (**) Button 19 mapped to 0
> > > > (**) Button 20 mapped to 0
> > > > (**) Button 21 mapped to 0
> > > > (**) Button 22 mapped to 0
> > > > (**) Button 23 mapped to 0
> > > > (**) Button 24 mapped to 0
> > > > (**) Button 25 mapped to 0
> > > > (**) Button 26 mapped to 0
> > > > (**) Button 27 mapped to 0
> > > > (**) Button 28 mapped to 0
> > > > (**) Button 29 mapped to 0
> > > > (**) Button 30 mapped to 0
> > > > (**) Button 31 mapped to 0
> > > > (**) Button 32 mapped to 0
> > > > (**) Axis 1 type is 1, mapped to 1, amplify=1.000
> > > > (**) Axis 2 type is 1, mapped to 2, amplify=1.000
> > > > (**) Axis 3 type is 1, mapped to 3, amplify=1.000
> > > > (**) Axis 4 type is 1, mapped to 4, amplify=1.000
> > > > (**) Axis 5 type is 2, mapped to 1, amplify=1.000
> > > > (**) Axis 6 type is 2, mapped to 2, amplify=1.000
> > > > (**) Axis 7 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 8 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 9 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 10 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 11 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 12 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 13 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 14 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 15 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 16 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 17 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 18 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 19 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 20 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 21 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 22 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 23 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 24 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 25 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 26 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 27 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 28 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 29 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 30 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 31 type is 0, mapped to 0, amplify=1.000
> > > > (**) Axis 32 type is 0, mapped to 0, amplify=1.000
> > > > (**) Option "SendCoreEvents"
> > > > (**) Logitech Cordless RumblePad 2 (keys): always reports core
> > > > events
> > > > (II) evaluating device (Razer Diamondback 1600)
> > > > (II) XINPUT: Adding extended input device "Razer Diamondback
> > > > 1600"
> > > > (type:
> > > > MOUSE)
> > > > (II) evaluating device (Dell USB Keyboard)
> > > > (II) XINPUT: Adding extended input device "Dell USB Keyboard"
> > > > (type: KEYBOARD)
> > > > (II) evaluating device (Logitech Cordless RumblePad 2)
> > > > (II) XINPUT: Adding extended input device "Logitech Cordless
> > > > RumblePad 2"
> > > > (type: JOYSTICK)
> > > > (II) evaluating device (Logitech Cordless RumblePad 2 (keys))
> > > > (II) XINPUT: Adding extended input device "Logitech Cordless
> > > > RumblePad 2
> > > > (keys)" (type: JOYSTICK)
> > > > jstkDeviceControlProc what=INIT
> > > > (EE) Joystick: Didn't find any usable axes.
> > > > jstkKeyboardDeviceControlProc what=DEVICE_INIT
> > > > (**) Initializing Keyboard with 1 keys
> > > > (**) Keymap [8]: 0x00000000
> > > > (II) Razer Diamondback 1600: SetupAuto: hw.iftype is 4,
> > > > hw.model is
> > > > 0
> > > > (II) Razer Diamondback 1600: SetupAuto: protocol is SysMouse
> > > > jstkKeyboardDeviceControlProc what=DEVICE_ON
> > > > jstkKeyboardDeviceControlProc what=DEVICE_OFF
> > > > (II) NVIDIA(0): Setting mode "1152x864"
> > > > (**) Option "BaudRate" "1200"
> > > > (**) Option "StopBits" "2"
> > > > (**) Option "DataBits" "8"
> > > > (**) Option "Parity" "None"
> > > > (**) Option "Vmin" "1"
> > > > (**) Option "Vtime" "0"
> > > > (**) Option "FlowControl" "None"
> > > > couldn't enable device 4
> > > > jstkKeyboardDeviceControlProc what=DEVICE_ON
> > > > jstkKeyboardDeviceControlProc what=DEVICE_OFF
> > > > (II) NVIDIA(0): Setting mode "1152x864"
> > > > couldn't enable device 4
> > > > jstkKeyboardDeviceControlProc what=DEVICE_ON
> > > > (II) 3rd Button detected: disabling emulate3Button
> > > > jstkKeyboardDeviceControlProc what=DEVICE_OFF
> > > > (II) NVIDIA(0): Setting mode "1152x864"
> > > > couldn't enable device 4
> > > > jstkKeyboardDeviceControlProc what=DEVICE_ON
> > > > (II) 3rd Button detected: disabling emulate3Button

> > > > i tried running usbhidctl -f /dev/uhid0 -a, but got no output.
> > > > running
> > > > usbhidctl -f /dev/uhid0 -r gives me the following output:

> > > > Report descriptor:
> > > > Collection page=Generic_Desktop usage=Game_Pad
> > > > Total   input size 0 bytes
> > > > Total  output size 0 bytes
> > > > Total feature size 0 bytes

> > > > i did the following to see if the device actually works: hd
> > > > /dev/uhid0 and
> > > > this is the result after pressing buttons 1-10:

> > > > 00000000  01 80 80 7f 80 18 00 08  01 80 80 7f 80 08 00 08
> > > > |................|
> > > > 00000010  01 80 80 7f 80 28 00 08  01 80 80 7f 80 08 00 08
> > > > |.....(..........|
> > > > 00000020  01 80 80 7f 80 48 00 08  01 80 80 7f 80 08 00 08
> > > > |.....H..........|
> > > > 00000030  01 80 80 7f 80 88 00 08  01 80 80 7f 80 08 00 08
> > > > |................|
> > > > 00000040  01 80 80 7f 80 08 01 08  01 80 80 7f 80 08 00 08
> > > > |................|
> > > > 00000050  01 80 80 7f 80 08 02 08  01 80 80 7f 80 08 00 08
> > > > |................|
> > > > 00000060  01 80 80 7f 80 08 04 08  01 80 80 7f 80 08 00 08
> > > > |................|
> > > > 00000070  01 80 80 7f 80 08 08 08  01 80 80 7f 80 08 00 08
> > > > |................|
> > > > 00000080  01 80 80 7f 80 08 10 08  01 80 80 7f 80 08 00 08
> > > > |................|
> > > > 00000090  01 80 80 7f 80 08 20 08  01 80 80 7f 80 08 00 08
> > > > |......
> > > > .........|

> > > > cheers.
> > > > Alex
> > > > _______________________________________________
> > > > freebsd-x11@freebsd.org mailing list
> > > > http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> > > > To unsubscribe, send any mail to
> > > > "freebsd-x11-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?permail-20090409172227f0889e8400004852-a_best01>