Date: Tue, 5 Nov 2019 21:44:36 +0100 From: Miroslav Lachman <000.fbsd@quip.cz> To: Chris Ross <cross+freebsd@distal.com> Cc: freebsd-stable@freebsd.org Subject: Re: Cisco 12G SAS RAID support (FreeBSD 12.1-RELEASE) ? Message-ID: <65cd40b7-e982-496b-4876-21d352a03634@quip.cz> In-Reply-To: <20191105201942.GF1177@westeros.distal.com> References: <20191105183448.GE1177@westeros.distal.com> <65e90493-a038-5668-45e9-5101c52c23eb@quip.cz> <20191105201942.GF1177@westeros.distal.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Chris Ross wrote on 11/05/2019 21:19: > On Tue, Nov 05, 2019 at 08:20:15PM +0100, Miroslav Lachman wrote: >> Chris Ross wrote on 11/05/2019 19:34: >>> Hello. I have a Cisco UCS C220-M5 with a RAID controller. It calls itself >>> "Cisco 12G Modular Raid Controller with 2GB cache", PPID UCSC-RAID-M5. >>> Looking at the CIMC, it shows the PCI vendor/device ids 1000:0014, which >>> looks to be an LSI MegaRAID Tri-Mode SAS3516. It looks like this should >>> be supported by the mpr(4) driver, but it doesn't seem to recognize it >>> at boot time. >> >> Do you have mpr_load="YES" in loader.conf? >> Or for ISO booting you can manually load kernel modules at boot prompt. > > I dropped to boot prompt in ISO boot, and entered 'mpr_load="YES"'. > > I tried "load", but wasn't able to devine how to load the mpr module with > that. Is that needed, or should 'mpr_load="YES"' have accomplished the > desired result? mpr_load="YES" goes to /etc/loader.conf If you need to load mpr manually in boot prompt I am not sure if it should be: load mpr or load mpr.ko of full path load /boot/kernel/mpr.ko Kind Regards Miroslav Lachman
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?65cd40b7-e982-496b-4876-21d352a03634>