Date: Wed, 25 Apr 2001 10:51:25 +0100 From: Geoff Buckingham <geoffb@chuggalug.clues.com> To: Greg Rumple <grumple@zaphon.llamas.net> Cc: freebsd-scsi@FreeBSD.ORG Subject: Re: Dell Poweredge 2550 Message-ID: <20010425105125.A31388@chuggalug.clues.com> In-Reply-To: <20010424230757.C47984@zaphon.llamas.net>; from Greg Rumple on Tue, Apr 24, 2001 at 11:07:57PM -0700 References: <20010424230757.C47984@zaphon.llamas.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Apr 24, 2001 at 11:07:57PM -0700, Greg Rumple wrote: I have moved this to freebsd-scsi > I just purchased a Dell Poweredge 2550 with the on-board Raid Controller > option, and just burned a copy of the 4.3 release CD to install on it. > It comes up stating it has a Dell Perc 3/Di raid controller, and all > looks fine (I have a nice 100+ gig raid 5 array). > > I than boot the install, and it finds no drives. I'm assuming one of > the following messages is the source of my problems. > > pci3: <unknown card> (vendor=0x9005, dev=0x00c5) at 4.0 irq 10 > pci2: <unknown card> (vendor=0x1028, dev=0x0002) at 2.1 irq 10 > pci1: <unknown card> (vendor-0x14e4, dev=0x1644) at 8.0 irq 10 > > I was hoping this would just work out of the box. I'm hoping I can get > this working. Any help would be greatly appreciated. > > It does see the onboard Adaptec aic7899 controller, just not the raid > controller. > > Thanks. > > Greg > > -- > Greg Rumple > grumple@zaphon.llamas.net > I assume from the above, that the Intall saw the disk device and you were, able to install to it, problems only occur when booting from the installed fs ? If so try booting from the CDs kernel. -- GeoffB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010425105125.A31388>