Date: Fri, 26 May 2000 19:25:56 +0400 (MSD) From: "Aleksandr A.Babaylov" <babolo@links.ru> To: john@essenz.com (Essenz Consulting) Cc: freebsd-hackers@FreeBSD.ORG Subject: Re: Unexpected reboot. Message-ID: <200005261525.TAA25943@aaz.links.ru> In-Reply-To: <Pine.BSF.4.10.10005261056250.79153-100000@athena.lightningone.net> from "Essenz Consulting" at "May 26, 0 11:04:01 am"
next in thread | previous in thread | raw e-mail | index | archive | help
Essenz Consulting writes: > I posted this awhile back I didnt get much response. > > Basically, I have a machine with FreeBSD 4.0-RELEASE. > > Every couple of days it reboots for now reason. When I looked at the logs, > it shows regular log data, then the next line reads "/kernel: Copyright > (c) 1992-2000 The FreeBSD Project. > > Then the standard kernel stuff gets listed. At the end of the kernel data > is says WARNING: / was not properly dismounted. There is nothing before > the kernel data about shutting down or rebooting. > > I have an Intel PRO/100+ network card, U2W scsi. Has anybody encountered > something like this? This same hardware configuration has no problems with > other versions of FreeBSD, could it be a 4.0 problem. > > Any help would be great. Thanks. I see it on 3.3-R and 3.4-R, it is rare on 4.0-R and almoust absent on FreeBSD badaxe.duty.ru 4.0-STABLE FreeBSD 4.0-STABLE #0: Sun May 7 21:12:08 MSD 2000 babolo@cicuta.babolo.ru:/usr/src/sys/compile/badaxe i386 but still occur sometimes : ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x6c00-0x6cff mem 0xe0420000-0xe0420fff irq 11 at device 8.0 on pci0 : ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs and : xl0: <3Com 3c905-TX Fast Etherlink XL> port 0x7400-0x743f irq 9 at device 10.0 on pci0 : xl0: Ethernet address: 00:60:97:5d:a2:7d : miibus0: <MII bus> on xl0 : nsphy0: <DP83840 10/100 media interface> on miibus0 : nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto : xl0: supplying EUI64: 00:60:97:ff:fe:5d:a2:7d with : CPU: AMD-K6(tm) 3D+ Processor (400.91-MHz 586-class CPU) : Origin = "AuthenticAMD" Id = 0x591 Stepping = 1 : Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> : AMD Features=0x80000800<SYSCALL,3DNow!> AMD-K6-III processor and : pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 : isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0 : atapci0: <VIA 82C586 ATA33 controller> port 0x6400-0x640f at device 7.1 on pci0 : chip1: <VIA 82C586B ACPI interface> at device 7.3 on pci0 VIA MVP3 chipset on PA-2013 mainboard but I now noticed that PA-2013 have special revision to work with AMD-K6-400 I have not. there is sometimes Apr 8 17:53:29 cicuta /kernel: (da0:ahc0:0:0:0): data overrun detected in Data-in phase. Tag == 0xb. Apr 8 17:53:29 cicuta /kernel: (da0:ahc0:0:0:0): Have seen Data Phase. Length = 8192. NumSGs = 1. Apr 8 17:53:29 cicuta /kernel: sg[0] - Addr 0x58ed000 : Length 8192 messages in addition to locks. I have no troubles at all with this hardware and 2.2.7-RELEASE -- @BABOLO http://links.ru/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200005261525.TAA25943>