From owner-freebsd-current Fri Nov 12 17:14:28 1999 Delivered-To: freebsd-current@freebsd.org Received: from sstar.com (sstar.com [209.102.160.1]) by hub.freebsd.org (Postfix) with ESMTP id 7E0A91514D for ; Fri, 12 Nov 1999 17:14:13 -0800 (PST) (envelope-from king@sstar.com) Received: from MAROON ([134.132.228.8]) by sstar.com with ESMTP (IPAD 2.5s/64) id 4983500; Fri, 12 Nov 1999 19:14:06 -0600 Message-Id: <4.2.0.58.19991112191106.0161a680@mail.sstar.com> X-Sender: king@mail.sstar.com X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.0.58 Date: Fri, 12 Nov 1999 19:13:56 -0600 To: Alex Zepeda From: Jim King Subject: Re: pnp and AWE64 Cc: freebsd-current@FreeBSD.ORG In-Reply-To: References: <4.2.0.58.19991111224704.015fe070@mail.sstar.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="=====================_766315773==_" Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG --=====================_766315773==_ Content-Type: text/plain; charset="us-ascii"; format=flowed At 04:32 PM 11/12/1999 -0800, Alex Zepeda wrote: >On Thu, 11 Nov 1999, Jim King wrote: > > > I just picked up an AWE64 to use until the Vortex2 driver is working. The > > card is detected in Win98, but unfortunately the new PnP code in -current > > (cvsup'ed this evening) doesn't seem to find this card at all. Nothing > > shows up about it in dmesg; pnpinfo shows my ISA PnP modem, but nothing at > > all about the AWE64. > >FWIW it detects my AWE64 just fine (and yes you must set the PnP OS bit to >no). This is with or without the PNPBIOS option int he kernel. It >doesn't seem to detect the integrated Yamaha sound bits though (with the >PNPBIOS bit). > >pcm1: at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq >5 drq 1,5 on isa0 > >How about posting your kernel config file? Attached, in all it's glory. The relevant lines seem to be: controller pnp0 device pcm0 options PNPBIOS The PNPBIOS line doesn't make a difference for the AWE64 (although it does make some difference - all the motherboard resources show up as unknowns with it enabled). --=====================_766315773==_ Content-Type: text/plain; charset="us-ascii" Content-Disposition: attachment; filename="RASP.txt" # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.freebsd.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.196 1999/10/22 04:36:52 n_hibma Exp $ machine i386 #cpu I386_CPU #cpu I486_CPU #cpu I586_CPU cpu I686_CPU ident RASP maxusers 64 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) syscall trace support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options SOFTUPDATES options PNPBIOS # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller pnp0 # PnP support for ISA #controller eisa0 controller pci0 # Floppy drives controller fdc0 at isa? port IO_FD1 irq 6 drq 2 disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 # IDE controller and disks controller wdc0 at isa? port IO_WD1 irq 14 flags 0xa0ffa0ff disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 controller wdc1 at isa? port IO_WD2 irq 15 flags 0xa0ffa0ff #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 # ATAPI devices on wdc? device wcd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) device wst0 #IDE Tape (e.g. Travan) # SCSI Controllers # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. controller ncr0 # NCR/Symbios Logic #controller ahb0 # EISA AHA1742 family controller ahc0 # AHA2940 and onboard AIC7xxx devices #controller amd0 # AMD 53C974 (Teckram DC-390(T)) #controller isp0 # Qlogic family #controller dpt0 # DPT Smartcache - See LINT for options! #controller adv0 at isa? port ? irq ? #controller adw0 #controller bt0 at isa? port ? irq ? #controller aha0 at isa? port ? irq ? # SCSI peripherals # Only one of each of these is needed, they are dynamically allocated. controller scbus0 # SCSI bus (required) device da0 # Direct Access (disks) device sa0 # Sequential Access (tape etc) device cd0 # CD device pass0 # Passthrough device (direct SCSI access) # Proprietary or custom CD-ROM Interfaces #device wt0 at isa? port 0x300 irq 5 drq 1 #device mcd0 at isa? port 0x300 irq 10 #device matcd0 at isa? port 0x230 #device scd0 at isa? port 0x230 # atkbdc0 controls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at isa? #device pcic1 at isa? # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 #device sio1 at isa? port IO_COM2 irq 3 #device sio2 at isa? disable port IO_COM3 irq 5 #device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 irq 7 controller ppbus0 # Parallel port bus (required) device lpt0 # Printer device plip0 # TCP/IP over parallel device ppi0 # Parallel port interface device #controller vpo0 # Requires scbus and da0 # PCI Ethernet NICs. #device ax0 # ASIX AX88140A device de0 # DEC/Intel DC21x4x (``Tulip'') device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) #device pn0 # Lite-On 82c168/82c169 (``PNIC'') #device tx0 # SMC 9432TX (83c170 ``EPIC'') #device vx0 # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. controller miibus0 # MII bus support #device al0 # ADMtek AL981/AN985 (``Comet''/``Centaur'') #device dm0 # Davicom DM9100/DM9102 #device mx0 # Macronix 98713/98715/98725 (``PMAC'') #device rl0 # RealTek 8129/8139 #device sf0 # Adaptec AIC-6915 (``Starfire'') #device sis0 # Silicon Integrated Systems SiS 900/SiS 7016 #device ste0 # Sundance ST201 (D-Link DFE-550TX) #device tl0 # Texas Instruments ThunderLAN #device vr0 # VIA Rhine, Rhine II #device wb0 # Winbond W89C840F device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device ep0 at isa? port 0x300 irq 10 #device ex0 at isa? port? irq? #device fe0 at isa? port 0x300 irq ? #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 irq 10 drq 0 #device cs0 at isa? port 0x300 irq ? # requires PCCARD (PCMCIA) support to be activated #device xe0 at isa? port? irq ? # PCCARD NIC drivers. # ze and zp take over the pcic and cannot coexist with generic pccard # support, nor the ed and ep drivers they replace. #device ze0 at isa? port 0x300 irq 10 iomem 0xd8000 #device zp0 at isa? port 0x300 irq 10 iomem 0xd8000 # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device gzip # Exec gzipped a.out's # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf 4 #Berkeley packet filter # USB support controller uhci0 # UHCI PCI->USB interface #controller ohci0 # OHCI PCI->USB interface controller usb0 # USB Bus (required) device ugen0 # Generic device uhid0 # "Human Interface Devices" device ukbd0 # Keyboard device ulpt0 # Printer controller umass0 # Disks/Mass storage - Requires scbus and da0 device ums0 # Mouse # sound device pcm0 --=====================_766315773==_-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message