Date: Tue, 05 Nov 2002 12:58:40 -0700 From: Tom Ponsford <tponsford@theriver.com> To: freebsd-current@FreeBSD.ORG Subject: machine check on AS2100A Message-ID: <3DC822F0.30807@theriver.com>
next in thread | raw e-mail | index | archive | help
Hi All, I'm getting a machine check on my new-toy: an Alphaserver 2100A 4/275 RM. It boots and runs 4.6.2 fine with a single cpu. But after I supped the current 5.0 sources from 10/29/2002 17:39 and did a buildworld and a Generic buildkernel, (plus all the other steps in UPDATING with the exception of installing world) But after an installkernel, I get a machine check, just after the kernel loads and boots. FreeBSD/alpha SRM disk boot, Revision 1.2 (root@tomzbox10.tomznet.lan, Tue Oct 29 02:44:25 MST 2002) Memory 262144 k Loading /boot/defaults/loader.conf /boot/kernel/kernel data=0x44e300+0x69cd0 syms=[0x8+0x5f4c0+0x8+0x4932d] Hit {Enter} to boot immediatly, or any other key for command prompt. Booting [/boot/kernel/kernel]... Entering /boot/kernel/kernel at 0xfffffc000033ea60... sio1: gdb debugging port Copyright (c) 1992-2002 The FreeBSd Project Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Wed Oct 30 10:44:40 MST 2002 root@tomzbox.10.tomznet.lan:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000864000. DEC AlphaServer 2100A 4/275, 274MHZ 8192 byte page size, 4 processors. CPU: EV45 (21064A) major=6 minor=2 OSF PAL rev: 0x4000c0002012d real memory = 266264576 (260024K bytes) avail memory = 250675200 (244800K bytes) FreeBSD/SMP:Multiprocessor System Detected: 4 CPUs Initializing GEOMetry subsystem t20: using interupt type 1 on pci bus 0 t20: <T2 Core Logic chipset> pci0 <PCI bus> on pcib0 eisab0: <PCI-EISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on eisab0 pcib1: <PCI-PCI bridge> at device 3.0 on pci0 pci2: <PCI bus> on pcib1 unexpected machine check: mces = 0x1 vector = 0x660 param = 0xffffffc00000006000 pc = 0xfffffc000064d758 ra = 0xfffffc000064d70c curproc= 0xfffffc0000762430 pid = 0, comm = swapper stopped at t2_pcib_read_config=0x3e8: or zero,s3,v0 <zero=0k 0,s3=0xffffffffffffffff,v0=0x7> db> trace t2_pcib_read_config() at t2_pcib_read_config+0x3e8 pcib_read_config() at pcib_read_config+0xcc pci_read_device() at pci_read_device+0xb4 pci_add_children() at pci_add_children+0xf8 pci_attach() at pci_attach+0xd8 device_probe_and_attach() at device_probe_and_attach+0xc8 bus_generic_attach() at bus_generic_attach+0x28 pcib_attach() at pcib_attach+0x68 device_probe_and_attach() at _device_probe_and_attach+0xc8 bus_generic_attach() at bus_generic_attach+0x28 pci_attach() at pci_attach+0xe4 device_probe_and_attach() at device_probe_and_attach+0xc8 bus_generic_attach() at bus_generic_attach+0x28 device_probe_and_attach() at device_probe_and_attaxh+0xc8 bus_generic_attach() at bus_generic-attach+0x28 t2_attach() at t2_attach+0x6c device_probe_and-attach() at device_probe_and_attach+0xc8 root_bus_configure() at root_bus_configure+0x38 configure() at configure+0x40 mi_startup() at mi_startup+0x144 locorestart() at locorestart+0x64 --- root of call graph --- I think its choking on the pci probe. FreeBSD 4.6.2-release boot fine though!! This is the dmesg from 4.6.2: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6.2-RELEASE #0: Sat Oct 26 12:03:29 MST 2002 root@tomzbox10.tomznet.lan:/usr/src/sys/compile/TOMZBOX10 DEC AlphaServer 2100A AlphaServer 2100A 4/275, 274MHz 8192 byte page size, 4 processors. CPU: EV45 (21064A) major=6 minor=2 OSF PAL rev: 0x4000c0002012d real memory = 266264576 (260024K bytes) avail memory = 253657088 (247712K bytes) Preloaded elf kernel "kernel" at 0xfffffc00006d4000. md0: Malloc disk t20: using interrupt type 1 on pci bus 0 pci0: <PCI bus> on pcib0 isab0: <Intel 82375EB PCI-EISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 pcib1: <DEC 21050 PCI-PCI bridge> at device 3.0 on pci0 pci2: <PCI bus> on pcib1 sym0: <810a> port 0x6000-0x60ff mem 0x81900000-0x819000ff irq 28 at device 1.0 on pci2 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking de0: <Digital 21040 Ethernet> port 0x6400-0x647f mem 0x81900200-0x8190027f irq 48 at device 6.0 on pci2 de0: DEC 21040 [10Mb/s] pass 2.4 de0: address 00:00:f8:20:be:e6 pcib2: <DEC 21050 PCI-PCI bridge> at device 7.0 on pci2 pci3: <PCI bus> on pcib2 isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x5000-0x50ff mem 0x81810000-0x81810fff irq 52 at device 0.0 on pci3 sym1: <810> port 0x6800-0x68ff mem 0x81900100-0x819001ff irq 56 at device 8.0 on pci2 sym1: No NVRAM, ID 7, Fast-10, SE, parity checking pci0: <S3 Trio graphics accelerator> at 6.0 irq 32 pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 12.0 irq 1 pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 12.4 pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 13.0 irq 1 pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 13.4 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A sio1: reserved for low-level i/o ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: <Printer> on ppbus0 lpt0: Polled port ppi0: <Parallel I/O> on ppbus0 Timecounter "alpha" frequency 275025010 Hz Waiting 15 seconds for SCSI devices to settle de0: enabling 10baseT port da1 at sym0 bus 0 target 3 lun 0 da1: <DEC RZ26L (C) DEC 440C> Fixed Direct Access SCSI-2 device da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da1: 1001MB (2050860 512 byte sectors: 64H 32S/T 1001C) cd0 at sym0 bus 0 target 5 lun 0 cd0: <DEC RRD45 (C) DEC 0436> Removable CD-ROM SCSI-2 device cd0: 4.237MB/s transfers (4.237MHz, offset 8) cd0: cd present [384580 x 512 byte records] da0 at sym0 bus 0 target 0 lun 0 da0: <DEC RZ28D (C) DEC 0010> Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da0: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C) Mounting root from ufs:/dev/da0a I'm kinda new to this machine. So it could be pilot error. Cheers Tom To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3DC822F0.30807>