From owner-freebsd-current Mon Aug 21 12: 4:39 2000 Delivered-To: freebsd-current@freebsd.org Received: from verdi.nethelp.no (verdi.nethelp.no [158.36.41.162]) by hub.freebsd.org (Postfix) with SMTP id 560BD37B43C for ; Mon, 21 Aug 2000 12:04:33 -0700 (PDT) Received: (qmail 28807 invoked by uid 1001); 21 Aug 2000 19:04:26 +0000 (GMT) To: jake@3ware.com, biffey@hotmail.com Cc: freebsd-current@freebsd.org Subject: Re: compaq proliant From: sthaug@nethelp.no In-Reply-To: Your message of "Mon, 21 Aug 2000 18:20:19 GMT" References: X-Mailer: Mew version 1.05+ on Emacs 19.34.2 Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Date: Mon, 21 Aug 2000 21:04:26 +0200 Message-ID: <28805.966884666@verdi.nethelp.no> Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > has anyone gotten freebsd (current or other) running on one of these? Which Proliant model are you talking about? > i've tried 4.0, 4.1, and -current, and the kernel panics on me with > the following: > > sym0: <895a> port 0x1000=0x10ff mem > 0xb1100000-0xb1101fff,0xb1400000-0xb14003ff irq 11 at device 4.0 on pci1 > sym0: failed to allocate RAM resources We're running 3.4-STABLE on a Proliant 3000 here, and it's working great. Mind you, this has a Symbios 875 based controller, not 895a as in your case. Steinar Haug, Nethelp consulting, sthaug@nethelp.no ---------------------------------------------------------------------- Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.4-20000124-STABLE #0: Sat Feb 19 23:14:12 CET 2000 sthaug@newsfeed1.telia.no:/local/freebsd/src/sys/compile/NEWSFEED1_SYM Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Xeon/Celeron (686-class CPU) Origin = "GenuineIntel" Id = 0x651 Stepping = 1 Features=0x183fbff real memory = 603979776 (589824K bytes) avail memory = 584105984 (570416K bytes) Programming 28 pins in IOAPIC #0 EISA INTCONTROL = 00000620 IOAPIC #0 intpint 24 -> irq 5 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 8, version: 0x001b0011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc02d6000. Pentium Pro MTRR support enabled eisa0: Probing for devices on the EISA bus Probing for devices on PCI bus 0: chip0: rev 0x03 on pci0.0.0 vga0: rev 0x22 int a irq 255 on pci0.6.0 chip1: rev 0x07 on pci0.15.0 chip2: rev 0x03 on pci0.17.0 Probing for devices on PCI bus 1: sym0: <875> rev 0x14 int a irq 19 on pci1.4.0 sym0: No NVRAM, ID 7, Fast-20, parity checking sym1: <875> rev 0x14 int b irq 18 on pci1.4.1 sym1: No NVRAM, ID 7, Fast-20, parity checking fxp0: rev 0x05 int a irq 18 on pci1.7.0 fxp0: Ethernet address 00:90:27:13:f6:21 tl0: rev 0x10 int a irq 17 on pci1.8.0 tl0: Ethernet address: 00:08:c7:1e:a7:35 tl0: autoneg complete, link status good (full-duplex, 100Mbps) Probing for devices on PCI bus 2: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0: failed to get data. psm0 irq 12 on isa psm0: model IntelliMouse, device ID 3 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (atapi): , removable, accel, dma, iordis acd0: drive speed 1378KB/sec, 128KB cache acd0: supported read types: CD-DA acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface APIC_IO: Testing 8254 interrupt delivery APIC_IO: Broken MP table detected: 8254 is not connected to IO APIC int pin 2 APIC_IO: routing 8254 via 8259 on pin 0 ccd0-3: Concatenated disk drivers Waiting 5 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! da0 at sym0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C) da2 at sym0 bus 0 target 4 lun 0 da2: Fixed Direct Access SCSI-2 device da2: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da2: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C) da3 at sym0 bus 0 target 5 lun 0 da3: Fixed Direct Access SCSI-2 device da3: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da3: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C) da1 at sym0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da1: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message