Date: Thu, 30 May 2002 13:03:50 -0400 From: "David Powers" <david@grayskies.net> To: <freebsd-scsi@freebsd.org> Subject: scsi aic7899 weirdness Message-ID: <001e01c207fb$f865ebd0$0b00000a@david>
next in thread | raw e-mail | index | archive | help
I have a new disk server with a SuperMicro P4SBR motherboard with an
on-board aic7899 controller. When I boot the machine with either
4.5-RELEASE or 4-STABLE I get the attached set of lengthy messages. The DLT
drive attached to the controller detects, but any attempt to access it with
mt fails with "mt: /dev/sa0: Input/output error". Any help on figuring out
what is going on would be greatly appreciated.
-David Powers
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RC #1: Tue May 28 21:23:01 EDT 2002
dpowers@disk2.cornerstonecapitalpartners.com:/usr/obj/usr/src/sys/DISK
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium 4 (1799.81-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV
,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory = 536805376 (524224K bytes)
avail memory = 519151616 (506984K bytes)
Preloaded elf kernel "kernel" at 0xc031f000.
Using $PIR table, 13 entries at 0xc00fde90
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82845 Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=1044 device=a500)> at device 2.0 on pci2
pci3: <PCI bus> on pcib3
asr0: <Adaptec Caching SCSI RAID> mem 0xe4000000-0xe5ffffff irq 11 at device
2.1 on pci2
asr0: major=154
asr0: ADAPTEC 2400A FW Rev. 370L, 4 channel, 256 CCBs, Protocol I2O
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x9000-0x90ff mem
0xe8200000-0xe8200fff irq 10 at device 5.0 on pci2
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x9400-0x94ff mem
0xe8202000-0xe8202fff irq 11 at device 5.1 on pci2
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x9800-0x983f mem
0xe8100000-0xe81fffff,0xe8203000-0xe8203fff irq 9 at device 6.0 on pci2
fxp0: Ethernet address 00:30:48:51:0c:4e
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x9c00-0x9c3f mem
0xe8000000-0xe80fffff,0xe8201000-0xe8201fff irq 5 at device 7.0 on pci2
fxp1: Ethernet address 00:30:48:51:0c:4c
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <ATI Mach64-GR graphics accelerator> at 8.0 irq 5
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xf000-0xf00f at device 31.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> at 31.2 irq 10
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 11
pci0: <Intel 82801BA/BAM (ICH2) USB controller USB-B> at 31.4 irq 11
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcdfff,0xce000-0xcefff,0xcf000-0xcffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
IP Filter: v3.4.27 initialized. Default = pass all, Logging = enabled
ata1-slave: ATAPI identify retries exceeded
ad0: 19595MB <MAXTOR 6L020J1> [39813/16/63] at ata0-master UDMA100
acd0: CDROM <SR243T> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
ahc0:A:5: Missed busfree. Lastphase = 0xe0, Curphase = 0x0
ahc0: Missing case in ahc_handle_scsiint. status = 8
(probe34:ahc0:0:6:0): SCB 0x3 - timed out
ahc0: Dumping Card State while idle, at SEQADDR 0x1
ACCUM = 0x0, SINDEX = 0xb1, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x0, DFSTATUS = 0x89
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x9
SCSIPHASE = 0x0
STACK == 0x108, 0x160, 0x0, 0x43
SCB count = 20
Kernel NEXTQSCB = 4
Card NEXTQSCB = 3
QINFIFO entries: 3 2 1 0 19 18 17 16 15 14
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0(c 0x0, s 0x57, l 0, t 0xff) 1(c 0x0, s 0x60, l 226, t
0xff) 2(c 0x0, s 0x7e, l 138, t 0xff) 3(c 0x0, s 0x27, l 81, t 0xff) 4(c
0x0, s 0x0, l 0, t 0xff) 5(c 0x0, s 0x5e, l 243, t 0xff) 6(c 0x0, s 0x41, l
89, t 0xff) 7(c 0x0, s 0x4, l 180, t 0xff) 8(c 0x0, s 0xfd, l 9, t 0xff) 9(c
0x0, s 0x33, l 236, t 0xff) 10(c 0x0, s 0x5b, l 188, t 0xff) 11(c 0x0, s
0xdc, l 31, t 0xff) 12(c 0x0, s 0xf5, l 242, t 0xff) 13(c 0x0, s 0x70, l
235, t 0xff) 14(c 0x0, s 0xb6, l 233, t 0xff) 15(c 0x0, s 0x8f, l 223, t
0xff) 16(c 0x0, s 0x59, l 31, t 0xff) 17(c 0x0, s 0xc6, l 125, t 0xff) 18(c
0x0, s 0xfe, l 238, t 0xff) 19(c 0x0, s 0x3f, l 191, t 0xff) 20(c 0x0, s
0xd3, l 157, t 0xff) 21(c 0x0, s 0xd9, l 240, t 0xff) 22(c 0x0, s 0x5d, l
247, t 0xff) 23(c 0x0, s 0xf2, l 253, t 0xff) 24(c 0x0, s 0xcb, l 182, t
0xff) 25(c 0x0, s 0x5f, l 34, t 0xff) 26(c 0x0, s 0xde, l 121, t 0xff) 27(c
0x0, s 0x5f, l 210, t 0xff) 28(c 0x0, s 0x55, l 131, t 0xff) 29(c 0x0, s
0x3c, l 214, t 0xff) 30(c 0x0, s 0x8f, l 63, t 0xff) 31(c 0x0, s 0xfe, l
151, t 0xff)
Pending list: 14(c 0x0, s 0x57, l 0), 15(c 0x0, s 0xf7, l 0), 16(c 0x0, s
0xe7, l 0), 17(c 0x0, s 0xd7, l 0), 18(c 0x0, s 0xc7, l 0), 19(c 0x0, s
0xb7, l 0), 0(c 0x0, s 0xa7, l 0), 1(c 0x0, s 0x97, l 0), 2(c 0x0, s 0x87, l
0), 3(c 0x0, s 0x67, l 0)
Kernel Free SCB list: 5 6 7 8 9 13 12 11 10
Untagged Q(5): 14
Untagged Q(6): 3
Untagged Q(8): 2
Untagged Q(9): 1
Untagged Q(10): 0
Untagged Q(11): 19
Untagged Q(12): 18
Untagged Q(13): 17
Untagged Q(14): 16
Untagged Q(15): 15
sg[0] - Addr 0x1dd43e84 : Length 36
(probe34:ahc0:0:6:0): SCB 3: Immediate reset. Flags = 0x6020
(probe34:ahc0:0:6:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 10 SCBs aborted
ahc0:A:5: Missed busfree. Lastphase = 0xe0, Curphase = 0x0
ahc0: Missing case in ahc_handle_scsiint. status = 8
(probe33:ahc0:0:5:0): SCB 0x3 - timed out
ahc0: Dumping Card State while idle, at SEQADDR 0x1
ACCUM = 0x0, SINDEX = 0xb1, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x0, DFSTATUS = 0x89
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x9
SCSIPHASE = 0x0
STACK == 0x108, 0x160, 0x43, 0x43
SCB count = 20
Kernel NEXTQSCB = 2
Card NEXTQSCB = 3
QINFIFO entries: 3
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0(c 0x0, s 0x57, l 0, t 0xff) 1(c 0x0, s 0x60, l 226, t
0xff) 2(c 0x0, s 0x7e, l 138, t 0xff) 3(c 0x0, s 0x27, l 81, t 0xff) 4(c
0x0, s 0x0, l 0, t 0xff) 5(c 0x0, s 0x5e, l 243, t 0xff) 6(c 0x0, s 0x41, l
89, t 0xff) 7(c 0x0, s 0x4, l 180, t 0xff) 8(c 0x0, s 0xfd, l 9, t 0xff) 9(c
0x0, s 0x33, l 236, t 0xff) 10(c 0x0, s 0x5b, l 188, t 0xff) 11(c 0x0, s
0xdc, l 31, t 0xff) 12(c 0x0, s 0xf5, l 242, t 0xff) 13(c 0x0, s 0x70, l
235, t 0xff) 14(c 0x0, s 0xb6, l 233, t 0xff) 15(c 0x0, s 0x8f, l 223, t
0xff) 16(c 0x0, s 0x59, l 31, t 0xff) 17(c 0x0, s 0xc6, l 125, t 0xff) 18(c
0x0, s 0xfe, l 238, t 0xff) 19(c 0x0, s 0x3f, l 191, t 0xff) 20(c 0x0, s
0xd3, l 157, t 0xff) 21(c 0x0, s 0xd9, l 240, t 0xff) 22(c 0x0, s 0x5d, l
247, t 0xff) 23(c 0x0, s 0xf2, l 253, t 0xff) 24(c 0x0, s 0xcb, l 182, t
0xff) 25(c 0x0, s 0x5f, l 34, t 0xff) 26(c 0x0, s 0xde, l 121, t 0xff) 27(c
0x0, s 0x5f, l 210, t 0xff) 28(c 0x0, s 0x55, l 131, t 0xff) 29(c 0x0, s
0x3c, l 214, t 0xff) 30(c 0x0, s 0x8f, l 63, t 0xff) 31(c 0x0, s 0xfe, l
151, t 0xff)
Pending list: 3(c 0x0, s 0x57, l 0)
Kernel Free SCB list: 1 0 19 18 17 16 15 14 4 5 6 7 8 9 13 12 11 10
Untagged Q(5): 3
sg[0] - Addr 0x1f052700 : Length 255
(probe33:ahc0:0:5:0): SCB 3: Immediate reset. Flags = 0x6020
(probe33:ahc0:0:5:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
ahc0:A:5: Missed busfree. Lastphase = 0xe0, Curphase = 0x0
ahc0: Missing case in ahc_handle_scsiint. status = 8
(probe33:ahc0:0:5:0): SCB 0x3 - timed out
ahc0: Dumping Card State while idle, at SEQADDR 0x1
ACCUM = 0x0, SINDEX = 0xb1, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x0, DFSTATUS = 0x89
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x9
SCSIPHASE = 0x0
STACK == 0x108, 0x160, 0x43, 0x43
SCB count = 20
Kernel NEXTQSCB = 2
Card NEXTQSCB = 3
QINFIFO entries: 3
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0(c 0x0, s 0x57, l 0, t 0xff) 1(c 0x0, s 0x60, l 226, t
0xff) 2(c 0x0, s 0x7e, l 138, t 0xff) 3(c 0x0, s 0x27, l 81, t 0xff) 4(c
0x0, s 0x0, l 0, t 0xff) 5(c 0x0, s 0x5e, l 243, t 0xff) 6(c 0x0, s 0x41, l
89, t 0xff) 7(c 0x0, s 0x4, l 180, t 0xff) 8(c 0x0, s 0xfd, l 9, t 0xff) 9(c
0x0, s 0x33, l 236, t 0xff) 10(c 0x0, s 0x5b, l 188, t 0xff) 11(c 0x0, s
0xdc, l 31, t 0xff) 12(c 0x0, s 0xf5, l 242, t 0xff) 13(c 0x0, s 0x70, l
235, t 0xff) 14(c 0x0, s 0xb6, l 233, t 0xff) 15(c 0x0, s 0x8f, l 223, t
0xff) 16(c 0x0, s 0x59, l 31, t 0xff) 17(c 0x0, s 0xc6, l 125, t 0xff) 18(c
0x0, s 0xfe, l 238, t 0xff) 19(c 0x0, s 0x3f, l 191, t 0xff) 20(c 0x0, s
0xd3, l 157, t 0xff) 21(c 0x0, s 0xd9, l 240, t 0xff) 22(c 0x0, s 0x5d, l
247, t 0xff) 23(c 0x0, s 0xf2, l 253, t 0xff) 24(c 0x0, s 0xcb, l 182, t
0xff) 25(c 0x0, s 0x5f, l 34, t 0xff) 26(c 0x0, s 0xde, l 121, t 0xff) 27(c
0x0, s 0x5f, l 210, t 0xff) 28(c 0x0, s 0x55, l 131, t 0xff) 29(c 0x0, s
0x3c, l 214, t 0xff) 30(c 0x0, s 0x8f, l 63, t 0xff) 31(c 0x0, s 0xfe, l
151, t 0xff)
Pending list: 3(c 0x50, s 0x57, l 0)
Kernel Free SCB list: 1 0 19 18 17 16 15 14 4 5 6 7 8 9 13 12 11 10
Untagged Q(5): 3
(probe33:ahc0:0:5:0): SCB 3: Immediate reset. Flags = 0x6060
(probe33:ahc0:0:5:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
ahc0:A:5: Missed busfree. Lastphase = 0xe0, Curphase = 0x0
ahc0: Missing case in ahc_handle_scsiint. status = 8
(probe0:ahc0:0:5:2): SCB 0x3 - timed out
ahc0: Dumping Card State while idle, at SEQADDR 0x1
ACCUM = 0x0, SINDEX = 0xb1, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x0, DFSTATUS = 0x89
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x9
SCSIPHASE = 0x0
STACK == 0x108, 0x160, 0x43, 0x43
SCB count = 20
Kernel NEXTQSCB = 2
Card NEXTQSCB = 3
QINFIFO entries: 3
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0(c 0x40, s 0x57, l 1, t 0xff) 1(c 0x0, s 0x60, l 226, t
0xff) 2(c 0x0, s 0x7e, l 138, t 0xff) 3(c 0x0, s 0x27, l 81, t 0xff) 4(c
0x0, s 0x0, l 0, t 0xff) 5(c 0x0, s 0x5e, l 243, t 0xff) 6(c 0x0, s 0x41, l
89, t 0xff) 7(c 0x0, s 0x4, l 180, t 0xff) 8(c 0x0, s 0xfd, l 9, t 0xff) 9(c
0x0, s 0x33, l 236, t 0xff) 10(c 0x0, s 0x5b, l 188, t 0xff) 11(c 0x0, s
0xdc, l 31, t 0xff) 12(c 0x0, s 0xf5, l 242, t 0xff) 13(c 0x0, s 0x70, l
235, t 0xff) 14(c 0x0, s 0xb6, l 233, t 0xff) 15(c 0x0, s 0x8f, l 223, t
0xff) 16(c 0x0, s 0x59, l 31, t 0xff) 17(c 0x0, s 0xc6, l 125, t 0xff) 18(c
0x0, s 0xfe, l 238, t 0xff) 19(c 0x0, s 0x3f, l 191, t 0xff) 20(c 0x0, s
0xd3, l 157, t 0xff) 21(c 0x0, s 0xd9, l 240, t 0xff) 22(c 0x0, s 0x5d, l
247, t 0xff) 23(c 0x0, s 0xf2, l 253, t 0xff) 24(c 0x0, s 0xcb, l 182, t
0xff) 25(c 0x0, s 0x5f, l 34, t 0xff) 26(c 0x0, s 0xde, l 121, t 0xff) 27(c
0x0, s 0x5f, l 210, t 0xff) 28(c 0x0, s 0x55, l 131, t 0xff) 29(c 0x0, s
0x3c, l 214, t 0xff) 30(c 0x0, s 0x8f, l 63, t 0xff) 31(c 0x0, s 0xfe, l
151, t 0xff)
Pending list: 3(c 0x40, s 0x57, l 2)
Kernel Free SCB list: 1 0 19 18 17 16 15 14 4 5 6 7 8 9 13 12 11 10
Untagged Q(5): 3
sg[0] - Addr 0x1dd0ae84 : Length 36
(probe0:ahc0:0:5:2): SCB 3: Immediate reset. Flags = 0x6020
(probe0:ahc0:0:5:2): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
ahc0:A:5: Missed busfree. Lastphase = 0xe0, Curphase = 0x0
ahc0: Missing case in ahc_handle_scsiint. status = 8
(probe0:ahc0:0:5:3): SCB 0x3 - timed out
ahc0: Dumping Card State while idle, at SEQADDR 0x1
ACCUM = 0x0, SINDEX = 0xb1, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x0, DFSTATUS = 0x89
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x9
SCSIPHASE = 0x0
STACK == 0x108, 0x160, 0x43, 0x43
SCB count = 20
Kernel NEXTQSCB = 2
Card NEXTQSCB = 3
QINFIFO entries: 3
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0(c 0x40, s 0x57, l 2, t 0xff) 1(c 0x0, s 0x60, l 226, t
0xff) 2(c 0x0, s 0x7e, l 138, t 0xff) 3(c 0x0, s 0x27, l 81, t 0xff) 4(c
0x0, s 0x0, l 0, t 0xff) 5(c 0x0, s 0x5e, l 243, t 0xff) 6(c 0x0, s 0x41, l
89, t 0xff) 7(c 0x0, s 0x4, l 180, t 0xff) 8(c 0x0, s 0xfd, l 9, t 0xff) 9(c
0x0, s 0x33, l 236, t 0xff) 10(c 0x0, s 0x5b, l 188, t 0xff) 11(c 0x0, s
0xdc, l 31, t 0xff) 12(c 0x0, s 0xf5, l 242, t 0xff) 13(c 0x0, s 0x70, l
235, t 0xff) 14(c 0x0, s 0xb6, l 233, t 0xff) 15(c 0x0, s 0x8f, l 223, t
0xff) 16(c 0x0, s 0x59, l 31, t 0xff) 17(c 0x0, s 0xc6, l 125, t 0xff) 18(c
0x0, s 0xfe, l 238, t 0xff) 19(c 0x0, s 0x3f, l 191, t 0xff) 20(c 0x0, s
0xd3, l 157, t 0xff) 21(c 0x0, s 0xd9, l 240, t 0xff) 22(c 0x0, s 0x5d, l
247, t 0xff) 23(c 0x0, s 0xf2, l 253, t 0xff) 24(c 0x0, s 0xcb, l 182, t
0xff) 25(c 0x0, s 0x5f, l 34, t 0xff) 26(c 0x0, s 0xde, l 121, t 0xff) 27(c
0x0, s 0x5f, l 210, t 0xff) 28(c 0x0, s 0x55, l 131, t 0xff) 29(c 0x0, s
0x3c, l 214, t 0xff) 30(c 0x0, s 0x8f, l 63, t 0xff) 31(c 0x0, s 0xfe, l
151, t 0xff)
Pending list: 3(c 0x40, s 0x57, l 3)
Kernel Free SCB list: 1 0 19 18 17 16 15 14 4 5 6 7 8 9 13 12 11 10
Untagged Q(5): 3
sg[0] - Addr 0x1dd0ae84 : Length 36
(probe0:ahc0:0:5:3): SCB 3: Immediate reset. Flags = 0x6020
(probe0:ahc0:0:5:3): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
ahc0:A:5: Missed busfree. Lastphase = 0xe0, Curphase = 0x0
ahc0: Missing case in ahc_handle_scsiint. status = 8
(probe0:ahc0:0:5:4): SCB 0x3 - timed out
ahc0: Dumping Card State while idle, at SEQADDR 0x1
ACCUM = 0x0, SINDEX = 0xb1, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x0, DFSTATUS = 0x89
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x9
SCSIPHASE = 0x0
STACK == 0x108, 0x160, 0x43, 0x43
SCB count = 20
Kernel NEXTQSCB = 2
Card NEXTQSCB = 3
QINFIFO entries: 3
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0(c 0x40, s 0x57, l 3, t 0xff) 1(c 0x0, s 0x60, l 226, t
0xff) 2(c 0x0, s 0x7e, l 138, t 0xff) 3(c 0x0, s 0x27, l 81, t 0xff) 4(c
0x0, s 0x0, l 0, t 0xff) 5(c 0x0, s 0x5e, l 243, t 0xff) 6(c 0x0, s 0x41, l
89, t 0xff) 7(c 0x0, s 0x4, l 180, t 0xff) 8(c 0x0, s 0xfd, l 9, t 0xff) 9(c
0x0, s 0x33, l 236, t 0xff) 10(c 0x0, s 0x5b, l 188, t 0xff) 11(c 0x0, s
0xdc, l 31, t 0xff) 12(c 0x0, s 0xf5, l 242, t 0xff) 13(c 0x0, s 0x70, l
235, t 0xff) 14(c 0x0, s 0xb6, l 233, t 0xff) 15(c 0x0, s 0x8f, l 223, t
0xff) 16(c 0x0, s 0x59, l 31, t 0xff) 17(c 0x0, s 0xc6, l 125, t 0xff) 18(c
0x0, s 0xfe, l 238, t 0xff) 19(c 0x0, s 0x3f, l 191, t 0xff) 20(c 0x0, s
0xd3, l 157, t 0xff) 21(c 0x0, s 0xd9, l 240, t 0xff) 22(c 0x0, s 0x5d, l
247, t 0xff) 23(c 0x0, s 0xf2, l 253, t 0xff) 24(c 0x0, s 0xcb, l 182, t
0xff) 25(c 0x0, s 0x5f, l 34, t 0xff) 26(c 0x0, s 0xde, l 121, t 0xff) 27(c
0x0, s 0x5f, l 210, t 0xff) 28(c 0x0, s 0x55, l 131, t 0xff) 29(c 0x0, s
0x3c, l 214, t 0xff) 30(c 0x0, s 0x8f, l 63, t 0xff) 31(c 0x0, s 0xfe, l
151, t 0xff)
Pending list: 3(c 0x40, s 0x57, l 4)
Kernel Free SCB list: 1 0 19 18 17 16 15 14 4 5 6 7 8 9 13 12 11 10
Untagged Q(5): 3
sg[0] - Addr 0x1dd0ae84 : Length 36
(probe0:ahc0:0:5:4): SCB 3: Immediate reset. Flags = 0x6020
(probe0:ahc0:0:5:4): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
ahc0:A:5: Missed busfree. Lastphase = 0xe0, Curphase = 0x0
ahc0: Missing case in ahc_handle_scsiint. status = 8
(probe0:ahc0:0:5:6): SCB 0x2 - timed out
ahc0: Dumping Card State while idle, at SEQADDR 0x1
ACCUM = 0x0, SINDEX = 0xb1, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x0, DFSTATUS = 0x89
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x9
SCSIPHASE = 0x0
STACK == 0x108, 0x160, 0x43, 0x43
SCB count = 20
Kernel NEXTQSCB = 3
Card NEXTQSCB = 2
QINFIFO entries: 2
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0(c 0x40, s 0x57, l 5, t 0xff) 1(c 0x0, s 0x60, l 226, t
0xff) 2(c 0x0, s 0x7e, l 138, t 0xff) 3(c 0x0, s 0x27, l 81, t 0xff) 4(c
0x0, s 0x0, l 0, t 0xff) 5(c 0x0, s 0x5e, l 243, t 0xff) 6(c 0x0, s 0x41, l
89, t 0xff) 7(c 0x0, s 0x4, l 180, t 0xff) 8(c 0x0, s 0xfd, l 9, t 0xff) 9(c
0x0, s 0x33, l 236, t 0xff) 10(c 0x0, s 0x5b, l 188, t 0xff) 11(c 0x0, s
0xdc, l 31, t 0xff) 12(c 0x0, s 0xf5, l 242, t 0xff) 13(c 0x0, s 0x70, l
235, t 0xff) 14(c 0x0, s 0xb6, l 233, t 0xff) 15(c 0x0, s 0x8f, l 223, t
0xff) 16(c 0x0, s 0x59, l 31, t 0xff) 17(c 0x0, s 0xc6, l 125, t 0xff) 18(c
0x0, s 0xfe, l 238, t 0xff) 19(c 0x0, s 0x3f, l 191, t 0xff) 20(c 0x0, s
0xd3, l 157, t 0xff) 21(c 0x0, s 0xd9, l 240, t 0xff) 22(c 0x0, s 0x5d, l
247, t 0xff) 23(c 0x0, s 0xf2, l 253, t 0xff) 24(c 0x0, s 0xcb, l 182, t
0xff) 25(c 0x0, s 0x5f, l 34, t 0xff) 26(c 0x0, s 0xde, l 121, t 0xff) 27(c
0x0, s 0x5f, l 210, t 0xff) 28(c 0x0, s 0x55, l 131, t 0xff) 29(c 0x0, s
0x3c, l 214, t 0xff) 30(c 0x0, s 0x8f, l 63, t 0xff) 31(c 0x0, s 0xfe, l
151, t 0xff)
Pending list: 2(c 0x40, s 0x57, l 6)
Kernel Free SCB list: 1 0 19 18 17 16 15 14 4 5 6 7 8 9 13 12 11 10
Untagged Q(5): 2
sg[0] - Addr 0x1dd0ae84 : Length 36
(probe0:ahc0:0:5:6): SCB 2: Immediate reset. Flags = 0x6020
(probe0:ahc0:0:5:6): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
ahc0:A:5: Missed busfree. Lastphase = 0xe0, Curphase = 0x0
ahc0: Missing case in ahc_handle_scsiint. status = 8
(probe0:ahc0:0:5:7): SCB 0x2 - timed out
ahc0: Dumping Card State while idle, at SEQADDR 0x1
ACCUM = 0x0, SINDEX = 0xb1, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x0, DFSTATUS = 0x89
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x9
SCSIPHASE = 0x0
STACK == 0x108, 0x160, 0x43, 0x43
SCB count = 20
Kernel NEXTQSCB = 3
Card NEXTQSCB = 2
QINFIFO entries: 2
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0(c 0x40, s 0x57, l 6, t 0xff) 1(c 0x0, s 0x60, l 226, t
0xff) 2(c 0x0, s 0x7e, l 138, t 0xff) 3(c 0x0, s 0x27, l 81, t 0xff) 4(c
0x0, s 0x0, l 0, t 0xff) 5(c 0x0, s 0x5e, l 243, t 0xff) 6(c 0x0, s 0x41, l
89, t 0xff) 7(c 0x0, s 0x4, l 180, t 0xff) 8(c 0x0, s 0xfd, l 9, t 0xff) 9(c
0x0, s 0x33, l 236, t 0xff) 10(c 0x0, s 0x5b, l 188, t 0xff) 11(c 0x0, s
0xdc, l 31, t 0xff) 12(c 0x0, s 0xf5, l 242, t 0xff) 13(c 0x0, s 0x70, l
235, t 0xff) 14(c 0x0, s 0xb6, l 233, t 0xff) 15(c 0x0, s 0x8f, l 223, t
0xff) 16(c 0x0, s 0x59, l 31, t 0xff) 17(c 0x0, s 0xc6, l 125, t 0xff) 18(c
0x0, s 0xfe, l 238, t 0xff) 19(c 0x0, s 0x3f, l 191, t 0xff) 20(c 0x0, s
0xd3, l 157, t 0xff) 21(c 0x0, s 0xd9, l 240, t 0xff) 22(c 0x0, s 0x5d, l
247, t 0xff) 23(c 0x0, s 0xf2, l 253, t 0xff) 24(c 0x0, s 0xcb, l 182, t
0xff) 25(c 0x0, s 0x5f, l 34, t 0xff) 26(c 0x0, s 0xde, l 121, t 0xff) 27(c
0x0, s 0x5f, l 210, t 0xff) 28(c 0x0, s 0x55, l 131, t 0xff) 29(c 0x0, s
0x3c, l 214, t 0xff) 30(c 0x0, s 0x8f, l 63, t 0xff) 31(c 0x0, s 0xfe, l
151, t 0xff)
Pending list: 2(c 0x40, s 0x57, l 7)
Kernel Free SCB list: 1 0 19 18 17 16 15 14 4 5 6 7 8 9 13 12 11 10
Untagged Q(5): 2
sg[0] - Addr 0x1dd0ae84 : Length 36
(probe0:ahc0:0:5:7): SCB 2: Immediate reset. Flags = 0x6020
(probe0:ahc0:0:5:7): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
ahc0:A:5: Missed busfree. Lastphase = 0xe0, Curphase = 0x0
ahc0: Missing case in ahc_handle_scsiint. status = 8
sa0 at ahc0 bus 0 target 5 lun 0
sa0: <BNCHMARK DLT1 3F21> Removable Sequential Access SCSI-2 device
sa0: 20.000MB/s transfers (10.000MHz, offset 15, 16bit)
da0 at asr0 bus 0 target 0 lun 0
da0: <ADAPTEC RAID-1 370L> Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 117800MB (241254400 512 byte sectors: 255H 63S/T 15017C)
Mounting root from ufs:/dev/ad0s1a
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb000-0xb01f
irq 10 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb800-0xb81f
irq 11 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
(sa0:ahc0:0:5:0): SCB 0x2 - timed out
ahc0: Dumping Card State while idle, at SEQADDR 0x1
ACCUM = 0x0, SINDEX = 0xb1, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x0, DFSTATUS = 0x89
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x9
SCSIPHASE = 0x0
STACK == 0x108, 0x160, 0x43, 0x43
SCB count = 20
Kernel NEXTQSCB = 3
Card NEXTQSCB = 2
QINFIFO entries: 2
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0(c 0x40, s 0x57, l 7, t 0xff) 1(c 0x0, s 0x60, l 226, t
0xff) 2(c 0x0, s 0x7e, l 138, t 0xff) 3(c 0x0, s 0x27, l 81, t 0xff) 4(c
0x0, s 0x0, l 0, t 0xff) 5(c 0x0, s 0x5e, l 243, t 0xff) 6(c 0x0, s 0x41, l
89, t 0xff) 7(c 0x0, s 0x4, l 180, t 0xff) 8(c 0x0, s 0xfd, l 9, t 0xff) 9(c
0x0, s 0x33, l 236, t 0xff) 10(c 0x0, s 0x5b, l 188, t 0xff) 11(c 0x0, s
0xdc, l 31, t 0xff) 12(c 0x0, s 0xf5, l 242, t 0xff) 13(c 0x0, s 0x70, l
235, t 0xff) 14(c 0x0, s 0xb6, l 233, t 0xff) 15(c 0x0, s 0x8f, l 223, t
0xff) 16(c 0x0, s 0x59, l 31, t 0xff) 17(c 0x0, s 0xc6, l 125, t 0xff) 18(c
0x0, s 0xfe, l 238, t 0xff) 19(c 0x0, s 0x3f, l 191, t 0xff) 20(c 0x0, s
0xd3, l 157, t 0xff) 21(c 0x0, s 0xd9, l 240, t 0xff) 22(c 0x0, s 0x5d, l
247, t 0xff) 23(c 0x0, s 0xf2, l 253, t 0xff) 24(c 0x0, s 0xcb, l 182, t
0xff) 25(c 0x0, s 0x5f, l 34, t 0xff) 26(c 0x0, s 0xde, l 121, t 0xff) 27(c
0x0, s 0x5f, l 210, t 0xff) 28(c 0x0, s 0x55, l 131, t 0xff) 29(c 0x0, s
0x3c, l 214, t 0xff) 30(c 0x0, s 0x8f, l 63, t 0xff) 31(c 0x0, s 0xfe, l
151, t 0xff)
Pending list: 2(c 0x40, s 0x57, l 0)
Kernel Free SCB list: 1 0 19 18 17 16 15 14 4 5 6 7 8 9 13 12 11 10
Untagged Q(5): 2
(sa0:ahc0:0:5:0): SCB 2: Immediate reset. Flags = 0x6020
(sa0:ahc0:0:5:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
ahc0:A:5: Missed busfree. Lastphase = 0xe0, Curphase = 0x0
ahc0: Missing case in ahc_handle_scsiint. status = 8
(sa0:ahc0:0:5:0): SCB 0x3 - timed out
ahc0: Dumping Card State while idle, at SEQADDR 0x1
ACCUM = 0x0, SINDEX = 0xb1, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
SSTAT0 = 0x5, SSTAT1 = 0x9
SCSIPHASE = 0x0
STACK == 0x175, 0x43, 0x43, 0x43
SCB count = 20
Kernel NEXTQSCB = 2
Card NEXTQSCB = 3
QINFIFO entries: 3
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0(c 0x40, s 0x57, l 0, t 0xff) 1(c 0x0, s 0x60, l 226, t
0xff) 2(c 0x0, s 0x7e, l 138, t 0xff) 3(c 0x0, s 0x27, l 81, t 0xff) 4(c
0x0, s 0x0, l 0, t 0xff) 5(c 0x0, s 0x5e, l 243, t 0xff) 6(c 0x0, s 0x41, l
89, t 0xff) 7(c 0x0, s 0x4, l 180, t 0xff) 8(c 0x0, s 0xfd, l 9, t 0xff) 9(c
0x0, s 0x33, l 236, t 0xff) 10(c 0x0, s 0x5b, l 188, t 0xff) 11(c 0x0, s
0xdc, l 31, t 0xff) 12(c 0x0, s 0xf5, l 242, t 0xff) 13(c 0x0, s 0x70, l
235, t 0xff) 14(c 0x0, s 0xb6, l 233, t 0xff) 15(c 0x0, s 0x8f, l 223, t
0xff) 16(c 0x0, s 0x59, l 31, t 0xff) 17(c 0x0, s 0xc6, l 125, t 0xff) 18(c
0x0, s 0xfe, l 238, t 0xff) 19(c 0x0, s 0x3f, l 191, t 0xff) 20(c 0x0, s
0xd3, l 157, t 0xff) 21(c 0x0, s 0xd9, l 240, t 0xff) 22(c 0x0, s 0x5d, l
247, t 0xff) 23(c 0x0, s 0xf2, l 253, t 0xff) 24(c 0x0, s 0xcb, l 182, t
0xff) 25(c 0x0, s 0x5f, l 34, t 0xff) 26(c 0x0, s 0xde, l 121, t 0xff) 27(c
0x0, s 0x5f, l 210, t 0xff) 28(c 0x0, s 0x55, l 131, t 0xff) 29(c 0x0, s
0x3c, l 214, t 0xff) 30(c 0x0, s 0x8f, l 63, t 0xff) 31(c 0x0, s 0xfe, l
151, t 0xff)
Pending list: 3(c 0x10, s 0x57, l 0)
Kernel Free SCB list: 1 0 19 18 17 16 15 14 4 5 6 7 8 9 13 12 11 10
Untagged Q(5): 3
sg[0] - Addr 0x10040 : Length 32
(sa0:ahc0:0:5:0): SCB 3: Immediate reset. Flags = 0x6068
(sa0:ahc0:0:5:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
ahc0:A:5: Missed busfree. Lastphase = 0xe0, Curphase = 0x0
ahc0: Missing case in ahc_handle_scsiint. status = 8
(sa0:ahc0:0:5:0): SCB 0x2 - timed out
ahc0: Dumping Card State while idle, at SEQADDR 0x1
ACCUM = 0x0, SINDEX = 0xb1, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISEQ = 0x12, SBLKCTL = 0xa
DFCNTRL = 0x4, DFSTATUS = 0x89
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
SSTAT0 = 0x5, SSTAT1 = 0x9
SCSIPHASE = 0x0
STACK == 0x175, 0x43, 0x43, 0x43
SCB count = 20
Kernel NEXTQSCB = 3
Card NEXTQSCB = 2
QINFIFO entries: 2
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0(c 0x40, s 0x57, l 0, t 0xff) 1(c 0x0, s 0x60, l 226, t
0xff) 2(c 0x0, s 0x7e, l 138, t 0xff) 3(c 0x0, s 0x27, l 81, t 0xff) 4(c
0x0, s 0x0, l 0, t 0xff) 5(c 0x0, s 0x5e, l 243, t 0xff) 6(c 0x0, s 0x41, l
89, t 0xff) 7(c 0x0, s 0x4, l 180, t 0xff) 8(c 0x0, s 0xfd, l 9, t 0xff) 9(c
0x0, s 0x33, l 236, t 0xff) 10(c 0x0, s 0x5b, l 188, t 0xff) 11(c 0x0, s
0xdc, l 31, t 0xff) 12(c 0x0, s 0xf5, l 242, t 0xff) 13(c 0x0, s 0x70, l
235, t 0xff) 14(c 0x0, s 0xb6, l 233, t 0xff) 15(c 0x0, s 0x8f, l 223, t
0xff) 16(c 0x0, s 0x59, l 31, t 0xff) 17(c 0x0, s 0xc6, l 125, t 0xff) 18(c
0x0, s 0xfe, l 238, t 0xff) 19(c 0x0, s 0x3f, l 191, t 0xff) 20(c 0x0, s
0xd3, l 157, t 0xff) 21(c 0x0, s 0xd9, l 240, t 0xff) 22(c 0x0, s 0x5d, l
247, t 0xff) 23(c 0x0, s 0xf2, l 253, t 0xff) 24(c 0x0, s 0xcb, l 182, t
0xff) 25(c 0x0, s 0x5f, l 34, t 0xff) 26(c 0x0, s 0xde, l 121, t 0xff) 27(c
0x0, s 0x5f, l 210, t 0xff) 28(c 0x0, s 0x55, l 131, t 0xff) 29(c 0x0, s
0x3c, l 214, t 0xff) 30(c 0x0, s 0x8f, l 63, t 0xff) 31(c 0x0, s 0xfe, l
151, t 0xff)
Pending list: 2(c 0x10, s 0x57, l 0)
Kernel Free SCB list: 1 0 19 18 17 16 15 14 4 5 6 7 8 9 13 12 11 10
Untagged Q(5): 2
sg[0] - Addr 0x10040 : Length 32
(sa0:ahc0:0:5:0): SCB 2: Immediate reset. Flags = 0x6068
(sa0:ahc0:0:5:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001e01c207fb$f865ebd0$0b00000a>