Date: Fri, 25 Nov 2005 09:00:55 -0800 From: Nate Lawson <nate@root.org> To: Bruno Ducrot <ducrot@poupinou.org> Cc: freebsd-acpi@freebsd.org, Timm Florian Gloger <timm.gloger@gmail.com> Subject: Re: System freezes when using ACPI Message-ID: <43874347.2030204@root.org> In-Reply-To: <20051125142558.GB8628@poupinou.org> References: <19269e540511250555p18355d49u@mail.gmail.com> <20051125142558.GB8628@poupinou.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Bruno Ducrot wrote: > On Fri, Nov 25, 2005 at 02:55:13PM +0100, Timm Florian Gloger wrote: > >>hey list, >> >>i installed a fresh 6.0 stable system on my machine. >> >>when using acpi the system freezes after less than 10 minutes. >>with disabled acpi there is no such problem and the system runs fine. >> >>i am new to freebsd so i dont know all the things which may influence >>the acpi driver to misbehave. >> >>i attached the outputs which are mentioned in the handbook. >> >>the system is: >> >>asus a7n8x deluxe rev 2.0 bios 1008 >>amd athlon xp 3000+ fsb 400 >>1 gb ddr400 ram >>nforce 2 chipset (firewire disabled) >>sapphire radeon 9800 pro >> >>if there are any further information required to get the system work >>properly ... > > > Looks like when you enable ACPI then APIC will be used for > interrupts whereas ATPIC will be used whithout ACPI. > > I guess the problem come from APIC, not ACPI (unless of course the > configuration things coming from ACPI is wrong). If it is the APIC, just set this in /boot/loader.conf: hint.apic.0.disabled="1" -- Nate
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43874347.2030204>