Date: Mon, 11 Oct 1999 20:55:31 +0100 From: Peter Gasparro <gasparr@attglobal.net> To: freebsd-questions@FreeBSD.org Subject: [Fwd: Re: Problem including Adaptec 1510 driver under 3.2-RELEASE] Message-ID: <380240B3.B923F92D@attglobal.net>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
-------- Original Message --------
Subject: Re: Problem including Adaptec 1510 driver under 3.2-RELEASE
Date: Sun, 10 Oct 1999 20:46:38 +0100
From: Peter Gasparro <gasparr@attglobal.net>
Reply-To: gasparr@attglobal.net
To: cjclark@home.com
References: <199910101619.MAA28545@cc942873-a.ewndsr1.nj.home.com>
"Crist J. Clark" wrote:
> Peter Gasparro wrote,
> > Hi,
> >
> > I get an error "ioconf.o(.data+0xd0): undefined reference to
> > `aicdriver'" when doing a "make". Please find attached a screen print
> > (krnlprob.txt) of the end of the "make" and the kernel config file NOW
> > as evidence of this.
> >
> > Any help would be much appreciated.
> >
> > Thanks in advance
> [snip]
>
> First, I found something odd (hopefully not ominous),
>
> % cd /sys/i386/conf
> % grep aic0 LINT
Yup, agreed, no aic in LINT
>
> %
>
> That is, the controller is not listed in LINT.
>
> Second, I did find the file where 'aicdriver' is defined,
> /sys/i386/isa/aic6360.c.
Yep, got one of those. Question, chip on the 1510 is 6230 not 6360
however
from what i've read the later will support the earlier(?).
>
>
> Third, although this probably has nothing to do with your problem
> (unless there were some other 2.2.x options I did not catch messing
> you up), the use of sd0 for SCSI HDD was changed in 2.2.x to
> 3.x. They should be caled da0.
rem'ed out sd0, changed da0 to "scbus0 target 0" (attached revised NOW),
getting.... (make depend works), no sorry, make fails with (attached
krnlpro1.txt)
>
> --
> Crist J. Clark cjclark@home.com
[-- Attachment #2 --]
../i386/i386/bioscall.s ../../i386/i386/exception.s ../../i386/i386/globals.s
../../i386/i386/support.s ../../i386/i386/swtch.s ../../i386/i386/locore.s
rm -f .depend
mv -f .newdep .depend
freebsd# make
cc -c -O -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit -Wnested-externs
-Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wuninitializ
ed -Wformat -Wunused -fformat-extensions -ansi -nostdinc -I- -I. -I../.. -I../
../../include -DKERNEL -DVM_STACK -include opt_global.h -elf ioconf.c
cc -c -O -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit -Wnested-externs
-Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wuninitializ
ed -Wformat -Wunused -fformat-extensions -ansi -nostdinc -I- -I. -I../.. -I../
../../include -DKERNEL -DVM_STACK -include opt_global.h -elf config.c
sh ../../conf/newvers.sh NOW
cc -c -O -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit -Wnested-externs
-Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wuninitializ
ed -Wformat -Wunused -fformat-extensions -ansi -nostdinc -I- -I. -I../.. -I../
../../include -DKERNEL -DVM_STACK -include opt_global.h -elf vers.c
loading kernel
ioconf.o(.data+0xd0): undefined reference to `aicdriver'
*** Error code 1
Stop.
freebsd#
[-- Attachment #3 --]
#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# For more information read the handbook part System Administration ->
# Configuring the FreeBSD Kernel -> The Configuration File.
# The handbook is available in /usr/share/doc/handbook or online as
# latest version from the FreeBSD World Wide Web server
# <URL:http://www.FreeBSD.ORG/>;
#
# An exhaustive list of options and more detailed explanations of the
# device lines is present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $Id: GENERIC,v 1.143.2.12 1999/05/14 15:12:26 jkh Exp $
machine "i386"
#cpu "I386_CPU"
cpu "I486_CPU"
#cpu "I586_CPU"
#cpu "I686_CPU"
ident NOW
maxusers 32
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
options MFS_ROOT #MFS usable as root device, "MFS" req'ed
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, "NFS" req'ed
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed
options PROCFS #Process filesystem
options QUOTA
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=5000 #Be pessimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
config kernel root on wd0
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options NCPU=2 # number of CPUs
#options NBUS=4 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
controller isa0
controller pnp0
controller eisa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
options "CMD640" # work around CMD640 chip deficiency
controller wdc0 at isa? port "IO_WD1" bio irq 14
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
controller wdc1 at isa? port "IO_WD2" bio irq 15
disk wd2 at wdc1 drive 0
disk wd3 at wdc1 drive 1
options ATAPI #Enable ATAPI support for IDE bus
options ATAPI_STATIC #Don't do it as an LKM
device acd0 #IDE CD-ROM
device wfd0 #IDE Floppy (e.g. LS-120)
# A single entry for any of these controllers (ncr, ahb, ahc) is
# sufficient for any number of installed devices.
#controller ncr0
#controller ahb0
#controller ahc0
controller isp0
# This controller offers a number of configuration options, too many to
# document here - see the LINT file in this directory and look up the
# dpt0 entry there for much fuller documentation on this.
controller dpt0
# controller adv0 at isa? port ? cam irq ?
# controller adw0
#controller bt0 at isa? port ? cam irq ?
# controller aha0 at isa? port ? cam irq ?
controller aic0 at isa? port 0x340 bio irq 11
controller scbus0 at aic0
# device sd0 at scbus0 target 0
device da0 at scbus0 target 0
device sa0
device pass0
device cd0 #Only need one of these, the code dynamically grows
#device wt0 at isa? port 0x300 bio irq 5 drq 1
#device mcd0 at isa? port 0x300 bio irq 10
#controller matcd0 at isa? port 0x230 bio
#device scd0 at isa? port 0x230 bio
# atkbdc0 controlls both the keyboard and the PS/2 mouse
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
#device psm0 at isa? tty irq 12
device vga0 at isa? port ? conflicts
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? tty
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? tty
#options XSERVER # support for X server
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
device npx0 at isa? port IO_NPX irq 13
#
# Laptop support (see LINT for more options)
#
device apm0 at isa? disable flags 0x31 # Advanced Power Management
# PCCARD (PCMCIA) support
#controller card0
#device pcic0 at card?
#device pcic1 at card?
device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4
device sio1 at isa? port "IO_COM2" tty irq 3
device sio2 at isa? disable port "IO_COM3" tty irq 5
device sio3 at isa? disable port "IO_COM4" tty irq 9
# Parallel port
device ppc0 at isa? port? flags 0x40 net irq 7
controller ppbus0
device lpt0 at ppbus?
device plip0 at ppbus?
device ppi0 at ppbus?
#controller vpo0 at ppbus?
#
# The following Ethernet NICs are all PCI devices.
#
#device ax0 # ASIX AX88140A
#device de0 # DEC/Intel DC21x4x (``Tulip'')
#device fxp0 # Intel EtherExpress PRO/100B (82557, 82558)
#device mx0 # Macronix 98713/98715/98725 (``PMAC'')
#device pn0 # Lite-On 82c168/82c169 (``PNIC'')
#device rl0 # RealTek 8129/8139
#device tl0 # Texas Instruments ThunderLAN
#device tx0 # SMC 9432TX (83c170 ``EPIC'')
#device vr0 # VIA Rhine, Rhine II
#device vx0 # 3Com 3c590, 3c595 (``Vortex'')
#device wb0 # Winbond W89C840F
#device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000
#device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000
#device ep0 at isa? port 0x300 net irq 10
#device ex0 at isa? port? net irq?
#device fe0 at isa? port 0x300 net irq ?
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000
#device lnc0 at isa? port 0x280 net irq 10 drq 0
# device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000
# device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000
#device cs0 at isa? port 0x300 net irq ?
pseudo-device loop
pseudo-device ether
pseudo-device sl 1
pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options KTRACE #kernel tracing
# This provides support for System V shared memory and message queues.
#
options SYSVSHM
options SYSVMSG
options SYSVSEM
# The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be
# aware of the legal and administrative consequences of enabling this
# option. The number of devices determines the maximum number of
# simultaneous BPF clients programs runnable.
#pseudo-device bpfilter 4 #Berkeley packet filter
pseudo-device speaker
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?380240B3.B923F92D>