Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 28 Sep 2005 11:45:32 +0200
From:      Marcin Jessa <lists@yazzy.org>
To:        Vladimir Grebenschikov <vova@sw.ru>
Cc:        acpi@freebsd.org, current@freebsd.org, nate@root.org
Subject:   Re: Invalid detection CPU frequency ?
Message-ID:  <20050928114532.6ab80f6b.lists@yazzy.org>
In-Reply-To: <1127890738.1220.5.camel@localhost>
References:  <1127801205.1268.9.camel@localhost> <4339D724.3020102@root.org> <1127890738.1220.5.camel@localhost>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 28 Sep 2005 10:58:58 +0400
Vladimir Grebenschikov <vova@sw.ru> wrote:

> В вт, 27/09/2005 в 16:35 -0700, Nate Lawson пишет:
> > Vladimir Grebenschikov wrote:
> > > It looks strange but sometimes my notebook start on full-speed
> > > (1.7GHz) and sysctls output looks like:
> > > 
> > > dev.cpu.0.freq: 1687
> > > dev.cpu.0.freq_levels: 1687/-1 1476/-1 1265/-1 1054/-1 843/-1
> > > 632/-1 421/-1 210/-1 dev.acpi_throttle.0.%desc: ACPI CPU
> > > Throttling
> > > 
> > > And sometimes it starts on low speed (~500 Mhz)
> > > dev.cpu.0.freq: 595
> > > dev.cpu.0.freq_levels: 595/-1 520/-1 446/-1 371/-1 297/-1 223/-1
> > > 148/-1 74/-1 dev.acpi_throttle.0.%desc: ACPI CPU Throttling
> > 
> > > And speed can't be raised by powerd or other.
> > > Looks like it happens when notebook stats or shutdowns on
> > > batteries. Rebooting on AC power cures situation. But anyway - I
> > > do not think it is normal.
> > > 
> > > Any suggestions ? 
> > 
> > It's very simple.  You have an old notebook that only supports 
> > throttling, not SpeedStep or other options.  Your BIOS sets the
> > initial speed based on AC line status on boot.  If you look at your
> > CPU announcement at the top of dmesg, it will show 595 Mhz or
> > whatever since it uses a simple calibration loop.
> > 
> > I might consider always setting 100% in the attach routine for 
> > acpi_throttle and p4tcc to get proper probe values.  You'll still
> > have a problem if you use the TSC timecounter since it's only
> > calibrated at boot.
> 
> Nate, thanks for explanation, is loading cpufreq.ko from loader is
> good solution ? Or I will still have TSC problems ? 

I compiled it into my kernel which works fine on thinkpad R50e
device	cpufreq		#CPU frequency control framework

My entire setup can be found on:
http://www.yazzy.org/configs/freebsd/thinkpad/ Cheers,

Cheers,
Marcin



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050928114532.6ab80f6b.lists>