From owner-freebsd-hardware Thu Oct 26 18:45:25 1995 Return-Path: owner-hardware Received: (from root@localhost) by freefall.freebsd.org (8.6.12/8.6.6) id SAA12523 for hardware-outgoing; Thu, 26 Oct 1995 18:45:25 -0700 Received: from genesis.atrad.adelaide.edu.au (genesis.atrad.adelaide.edu.au [129.127.96.120]) by freefall.freebsd.org (8.6.12/8.6.6) with ESMTP id SAA12518 for ; Thu, 26 Oct 1995 18:45:21 -0700 Received: from msmith@localhost by genesis.atrad.adelaide.edu.au (8.6.9/8.6.9) id LAA12215; Fri, 27 Oct 1995 11:08:52 +0930 From: Michael Smith Message-Id: <199510270138.LAA12215@genesis.atrad.adelaide.edu.au> Subject: Re: quick SB nit To: hobbit@avian.org (*Hobbit*) Date: Fri, 27 Oct 1995 11:08:51 +0930 (CST) Cc: freebsd-hardware@freebsd.org In-Reply-To: <199510262302.TAA20292@narq.avian.org> from "*Hobbit*" at Oct 26, 95 07:02:08 pm Content-Type: text Content-Length: 1760 Sender: owner-hardware@freebsd.org Precedence: bulk *Hobbit* stands accused of saying: > > The 2.0.5 CD release seems unable to see a panasonic/matsuSHITa cdrom drive > plugged into an Acermagic S20 soundcard in "SB emulate mode". Looking at the > sources [which I can do via ms-loss] I see that /usr/src/sys/i386/isa/ > matcd/options.h has the base I/O ports for soundblasters in the port_hints[] > array as 0x230 and 0x240 with a "ports SB can use" comment. You can override this list with a specific address using userconfig. > This disagrees with the Acer config utility, which offers options for *0x220* > and 0x240, and also disagrees with an Acer t.s. rep's assertion that 0x220 is > THE default base port for ALL soundblasters and emulations thereof. Not 0x230. The SB base port has nothing to do with the CD's I/O port. On some cards, the port is 0x10 higher than the soundcard base (eg. real SB cards), on others it may be elsewhere. > Would this explain why GENERIC is still unable to see the cdrom?? Sorry if > this particular problem has been discovered and fixed long since and I just > haven't read the right updated faq. I'd build a new kernel and test the > theory, but I've got a bit of a chicken-and-egg problem here... Tinker with the base address for the CD - with userconfig under 2.0.5R you still have the "probe" command, so you can prod around and see if you can find it. Good luck 8) > _H* -- ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ ]] Genesis Software genesis@atrad.adelaide.edu.au [[ ]] High-speed data acquisition and [[ ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ ]] My car has "demand start" -Terry Lambert UNIX: live FreeBSD or die! [[